TAS5710

AKTIV

Class-D-Audioverstärker mit 20 W Stereo, 10 bis 26 V Versorgungsspannung, Digitaleingang, Closed-Loo

Jetzt bestellen

Datenblatt

document-pdfAcrobat TAS5710 datasheet (Englisch)

TAS5710

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Audio input type

Digital Input

Architecture

Class-D

Speaker channels (max)

Stereo

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

10

Load (min) (Ω)

6

Control interface

Software

Closed/open loop

Closed

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Sampling rate (max) (kHz)

48

Operating temperature range (°C)

0 to 85

Audio input type

Digital Input

Architecture

Class-D

Speaker channels (max)

Stereo

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

10

Load (min) (Ω)

6

Control interface

Software

Closed/open loop

Closed

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Sampling rate (max) (kHz)

48

Operating temperature range (°C)

0 to 85

HTQFP (PHP)

48

81 mm² 9 x 9

Audio Input/Output
- 20-W Into an 8-Ω Load From an 18-V Supply
- Wide PVCC Range (10 V to 26 V)
- Supports One Serial Audio Input (8 kHz - 48 kHz Sample Rates) (LJ/RJ/I²S)
- Power-Stage Feedback Allows Operation From Poorly Regulated Power Supplies
Audio/PWM Processing
- Factory-Trimmed Internal Oscillator for Automatic Rate Detection
- High-End 32-Bit Data Path Audio Processor
- 18 Biquads for Speaker EQ
- Dynamic Range Control (DRC)
- Support for Pseudo Bass and 3D Effects
Benefits
- EQ: Speaker Equalization for Better Sound
- 2-Band DRC: Improved Bass Performance, Enables Speaker Protection and Night mode Listening
- Autobank Switching: Preloaded Coefficients for Three Different Sample Rates Eliminates the Need to Update Coefficients When Sample Rate Changes
- Autodetect: Automatically Detects Sample-Rate Changes Eliminating the Need for External Microprocessor Intervention
- Closed-Loop Power Stage: Enables Wide PVCC Operating Range and Reduced Power Supply Ripple Distortion

Audio Input/Output
- 20-W Into an 8-Ω Load From an 18-V Supply
- Wide PVCC Range (10 V to 26 V)
- Supports One Serial Audio Input (8 kHz - 48 kHz Sample Rates) (LJ/RJ/I²S)
- Power-Stage Feedback Allows Operation From Poorly Regulated Power Supplies
Audio/PWM Processing
- Factory-Trimmed Internal Oscillator for Automatic Rate Detection
- High-End 32-Bit Data Path Audio Processor
- 18 Biquads for Speaker EQ
- Dynamic Range Control (DRC)
- Support for Pseudo Bass and 3D Effects
Benefits
- EQ: Speaker Equalization for Better Sound
- 2-Band DRC: Improved Bass Performance, Enables Speaker Protection and Night mode Listening
- Autobank Switching: Preloaded Coefficients for Three Different Sample Rates Eliminates the Need to Update Coefficients When Sample Rate Changes
- Autodetect: Automatically Detects Sample-Rate Changes Eliminating the Need for External Microprocessor Intervention
- Closed-Loop Power Stage: Enables Wide PVCC Operating Range and Reduced Power Supply Ripple Distortion

The TAS5710 is a 20-W, efficient, digital audio power amplifier for driving stereo bridge-tied speakers. A 32-bit datapath eliminates the need for pre-scaling before processing and preserves signal integrity without sacrificing dynamic range. A digital audio processor with fully programmable digital filters allows designers to custom tune speakers for optimum sound in small enclosures. A programmable DRC can adjust power levels for a scaleable design while also enabling night-mode listening modes.

The closed-loop architecture allows the device to operate from poorly regulated supplies. Figure 1 below shows the benefit of the feedback architecture when a noisy supply (1kHz, 500mVpp ripple) modulates a 10kHz audio input. The figure shows a 40dB improvement in sideband suppression when compared to an open-loop design. This correlates directly to a 24dB improvement in distortion as seen in Figure 2.

The TAS5710 is a 20-W, efficient, digital audio power amplifier for driving stereo bridge-tied speakers. A 32-bit datapath eliminates the need for pre-scaling before processing and preserves signal integrity without sacrificing dynamic range. A digital audio processor with fully programmable digital filters allows designers to custom tune speakers for optimum sound in small enclosures. A programmable DRC can adjust power levels for a scaleable design while also enabling night-mode listening modes.

The closed-loop architecture allows the device to operate from poorly regulated supplies. Figure 1 below shows the benefit of the feedback architecture when a noisy supply (1kHz, 500mVpp ripple) modulates a 10kHz audio input. The figure shows a 40dB improvement in sideband suppression when compared to an open-loop design. This correlates directly to a 24dB improvement in distortion as seen in Figure 2.

filter

Andere Lautsprecherverstärker suchen

Herunterladen

Next Generation 20-W Stereo, 16V Closed-Loop Digital Input Audio Class-D Amplifier: TAS5760L

Next Generation 25-W Stereo, 26V Closed-Loop Digital Input Audio Class-D Amplifier: TAS5760M

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	TAS5710 datasheet		12 Aug 2008

TAS5710

Class-D-Audioverstärker mit 20 W Stereo, 10 bis 26 V Versorgungsspannung, Digitaleingang, Closed-Loo

TAS5710

Produktdetails

Technische Dokumentation

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren