TAS5755M

Name: TAS5755M
Brand: TI
SKU: TAS5755M
Price: 1.98 USD

AKTIV

Open-Loop-Class-D-Audioverstärker mit 50 W Stereo, 100 W Mono, 8 bis 26,4 V, Digitaleingang und 2.1-

Jetzt bestellen

Datenblatt

document-pdfAcrobat TAS5755M 2 × 50W (2 × 19W + 1 × 50W) Digital Input Audio Amplifier With Integrated Audio Processor and 2.1 Mode Support datasheet (Rev. C) (Englisch) PDF | HTML

TAS5755M

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Audio input type

Digital Input

Architecture

Class-D

Speaker channels (max)

3

Rating

Catalog

Power stage supply (max) (V)

26.4

Power stage supply (min) (V)

8

Load (min) (Ω)

4

Output power (W)

50

SNR (dB)

104

THD + N at 1 kHz (%)

0.05

Iq (typ) (mA)

32

Control interface

I2C, Software

Closed/open loop

Open

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Sampling rate (max) (kHz)

48

Operating temperature range (°C)

0 to 125

Audio input type

Digital Input

Architecture

Class-D

Speaker channels (max)

3

Rating

Catalog

Power stage supply (max) (V)

26.4

Power stage supply (min) (V)

8

Load (min) (Ω)

4

Output power (W)

50

SNR (dB)

104

THD + N at 1 kHz (%)

0.05

Iq (typ) (mA)

32

Control interface

I2C, Software

Closed/open loop

Open

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Sampling rate (max) (kHz)

48

Operating temperature range (°C)

0 to 125

HTSSOP (DFD)

56

113.4 mm² 14 x 8.1

Reduced Sol
- Single-chip 2.1, 2.0 and Mono Mode Capable
- Single-filter in Mono (PBTL) Mode.
- Pad-up Package and 80 mΩ R_DSON Enhances Thermal Performance
High Output Power capable:
- 2 × 19 W +1 × 50 W in 2.1 mode
  (2 × 4 Ω + 1 × 6 Ω, 24 V)
- 2 × 50 W in 2.0 mode (2 × 6 Ω, 24 V)
- 1 × 100 W in Mono Mode (1 × 2 Ω, 24 V)
- Wide Voltage Range: 8 V to 26.4 V
Audio Performance Audio:
- THD+N ≤ 0.05% at 1 kHz (R_SPK = 8 Ω, POUT = 1 W, PVDD = 18 V)
- ICN ≤ 50 µVRMS
- Crosstalk ≤ - 67 dB
- SNR ≥ 104 dB
- BD Modulation Available, for Improved Audio Performance and Efficiency.
Integrated Audio Processing:
- 2 × 8 + 1 × 2 Biquads
- Two-band + Single-band configurable Dynamic Range Control (DRC)
- License-Free 3D Effects
- Signal Mixing and DC blocking filter
- Automatic Rate Detection
Integrated Self-protection
- Thermal Protection
- Over-current Limit Protection
- Under-voltage Protection

Reduced Sol
- Single-chip 2.1, 2.0 and Mono Mode Capable
- Single-filter in Mono (PBTL) Mode.
- Pad-up Package and 80 mΩ R_DSON Enhances Thermal Performance
High Output Power capable:
- 2 × 19 W +1 × 50 W in 2.1 mode
  (2 × 4 Ω + 1 × 6 Ω, 24 V)
- 2 × 50 W in 2.0 mode (2 × 6 Ω, 24 V)
- 1 × 100 W in Mono Mode (1 × 2 Ω, 24 V)
- Wide Voltage Range: 8 V to 26.4 V
Audio Performance Audio:
- THD+N ≤ 0.05% at 1 kHz (R_SPK = 8 Ω, POUT = 1 W, PVDD = 18 V)
- ICN ≤ 50 µVRMS
- Crosstalk ≤ - 67 dB
- SNR ≥ 104 dB
- BD Modulation Available, for Improved Audio Performance and Efficiency.
Integrated Audio Processing:
- 2 × 8 + 1 × 2 Biquads
- Two-band + Single-band configurable Dynamic Range Control (DRC)
- License-Free 3D Effects
- Signal Mixing and DC blocking filter
- Automatic Rate Detection
Integrated Self-protection
- Thermal Protection
- Over-current Limit Protection
- Under-voltage Protection

The TAS5755M is a single-chip flexible digital audio solution with integrated processing that supports 2.1 (2 speakers + subwoofer), 2.0 or stereo (2 speakers) and mono (high power speaker) modes.

Its high efficiency, low 80 mΩ R_DSON and pad-up package allows the device to output up to 2 × 50 W or 1 × 100 W.

TAS5755M leverages 2 full H-bridges which are used for each channel in stereo mode. In 2.1 mode, TAS5755M runs 2 independent speaker channels using 2 half-bridges while using a full-bridge to drive a subwoofer. Finally, in mono mode, TAS5755M supports pre-filter parallel bridge tied load (PBTL) using only one filter stage to reduce total system size and cost.

TAS5755M has integrated audio processing. It includes: signal mixing, DC blocking filters, 2 × 8 + 1 × 2 biquads for equalization. Power limiting is implemented by leveraging a two-band log-style DRC and a separate single-band DRC for the subwoofer channel.

The TAS5755M is a single-chip flexible digital audio solution with integrated processing that supports 2.1 (2 speakers + subwoofer), 2.0 or stereo (2 speakers) and mono (high power speaker) modes.

Its high efficiency, low 80 mΩ R_DSON and pad-up package allows the device to output up to 2 × 50 W or 1 × 100 W.

TAS5755M leverages 2 full H-bridges which are used for each channel in stereo mode. In 2.1 mode, TAS5755M runs 2 independent speaker channels using 2 half-bridges while using a full-bridge to drive a subwoofer. Finally, in mono mode, TAS5755M supports pre-filter parallel bridge tied load (PBTL) using only one filter stage to reduce total system size and cost.

TAS5755M has integrated audio processing. It includes: signal mixing, DC blocking filters, 2 × 8 + 1 × 2 biquads for equalization. Power limiting is implemented by leveraging a two-band log-style DRC and a separate single-band DRC for the subwoofer channel.

filter

Andere Lautsprecherverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

	Typ	Titel		Datum
*	Data sheet	TAS5755M 2 × 50W (2 × 19W + 1 × 50W) Digital Input Audio Amplifier With Integrated Audio Processor and 2.1 Mode Support datasheet (Rev. C)	PDF \| HTML	27 Apr 2018
	EVM User's guide	TAS5755EVM Evaluation Module (Rev. A)		18 Okt 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TAS5755MEVM — TAS5755M-Evaluierungsmodul

The TAS5755M evaluation module demonstrates the TAS5755M device from Texas Instruments. The TAS5755M combines a high-performance PWM processor with a class-D audio power amplifier. This EVM can be configured with two single-ended (SE) speakers with a BTL subwoofers (2.1) or two bridge-tied (...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Simulationsmodell

TAS5755M IBIS Model

SLOM436.ZIP (39 KB) - IBIS Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (DFD)	56	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

TAS5755M

Open-Loop-Class-D-Audioverstärker mit 50 W Stereo, 100 W Mono, 8 bis 26,4 V, Digitaleingang und 2.1-

TAS5755M

Produktdetails

Technische Dokumentation

Design und Entwicklung

TAS5755MEVM — TAS5755M-Evaluierungsmodul

TAS5755M IBIS Model

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos