TX73H32
32-kanaliger, dreistufiger Transmitter mit 2 A Impulsgeber und integriertem Übertragungs-Strahlforme
TX73H32
- Transmitter supports:
- 32-channel 3-level pulser and active transmit/ receive (T/R) switch
- 3-level pulser:
- Maximum output voltage: ±100V
- Minimum output voltage: ±2V
- Maximum output current: 2A
- True return to zero to discharge output to ground
- Second harmonic of –43dBc at 5MHz
- –3-dB Bandwidth with 220Ω || 220pF load
- 19MHz for a ±100V supply
- Very low receive power: 0.4mW/ch
- Active transmit/receive (T/R) switch with:
- Turn on resistance of 13Ω
- Turn on and Turn off time: 100ns
- Transient glitch: 20mVPP
- On-chip beam former with:
- Channel based T/R switch on and off controls
- Delay resolution: half beamformer clock period, minimum 2.5ns
- Maximum delay: 214 beamformer clock period
- Maximum beamformer clockspeed: 200MHz
- On-Chip RAM for pattern and delay profile
- One 512 × 32 memory to store beam-former pattern and delay for a group of 2 channels
- Global repeat feature present, enabling long-duration patterns
- High-speed (400MHz maximum), 2-lane LVDS serial programming interface.
- Low programming time: ≈1µs for delay profile update
- 32-bit Checksum to detect wrong SPI writes
- Supports CMOS serial programming interface (50MHz maximum)
- High-reliability features:
- Internal temperature sensor and automatic thermal shutdown
- No specific power sequencing requirement
- Error flag register to detect faulty conditions
- Integrated passives for the floating supplies and bias voltages
- Small package: FC-BGA-196 (12mm × 12mm) with 0.8mm pitch
TX73H32 is a highly integrated, high-performance transmitter device for ultrasound imaging system. The device has a total of 32 pulser circuits, 32 transmit/ receive switches (referred to as T/R or TR switches) and supports on-chip beamformer (TxBF). The device also integrates on-chip floating power supplies that reduce the number of required high-voltage power supplies.
TX73H32 has a pulser circuit that generates three-level high voltage pulses (up to ±100V) that is used to excite multiple channels of an ultrasound transducer. The device supports total 32 outputs. The maximum output current is 2A.
Device can be used as a transmitter for many applications like ultrasound imaging, non-destructive testing, SONAR, LIDAR, marine navigation system, brain imaging systems and so on.
Technische Dokumentation
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
TX73H32EVM — TX73H32 Evaluierungsmodul
Das TX73H32-Evaluierungsmodul (EVM) wird zur Evaluierung des TX73H32-Bausteins unter verschiedenen Antriebsstärken, verschiedenen Spannungspegeln und verschiedenen Modi des Bausteins verwendet. Das EVM enthält alle erforderlichen Steuersignale und die integrierte Stromerzeugung, wodurch der Bedarf (...)
PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
FCCSP (ACP) | 196 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.