BQ24075T

Name: BQ24075T
Brand: TI
SKU: BQ24075T
Price: 0.769 USD

활성

SYSOFF를 지원하는 독립형 1셀 1.5A 선형 배터리 충전기, 전원 경로, 4.2V VBAT, 전압 기반 TS

지금 주문

데이터 시트

document-pdfAcrobat BQ2407xT Standalone 1-Cell 1.5-A Linear Battery Charger with Power Path and Voltage-Based TS datasheet (Rev. C) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

비교 대상 장치와 유사한 기능

BQ25180

활성

조정 전원 경로를 지원하는 1A 리튬 이온 및 LiFePO4 I²C 프로그래머블 선형 충전기, WCSP 패키지 This product is 1-A Li-ion and LiFePO4 I²C programmable linear charger with regulated power path in a WCSP package

BQ24075T

활성

데이터 시트

지금 주문

제품 상세 정보

Number of series cells

1

Charge current (max) (A)

1.5

Vin (max) (V)

6.4

Cell chemistry

Li-Ion/Li-Polymer

Battery charge voltage (min) (V)

4.2

Battery charge voltage (max) (V)

4.2

Absolute max Vin (max) (V)

28

Control topology

Linear

Control interface

Standalone (RC-Settable)

Features

BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power)

Vin (min) (V)

4.35

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of series cells

1

Charge current (max) (A)

1.5

Vin (max) (V)

6.4

Cell chemistry

Li-Ion/Li-Polymer

Battery charge voltage (min) (V)

4.2

Battery charge voltage (max) (V)

4.2

Absolute max Vin (max) (V)

28

Control topology

Linear

Control interface

Standalone (RC-Settable)

Features

BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power)

Vin (min) (V)

4.35

Rating

Catalog

Operating temperature range (°C)

-40 to 85

VQFN (RGT)

16

9 mm² 3 x 3

Fully Compliant USB Charger
Selectable 100 mA and 500 mA maximum input current
100 mA Maximum current limit ensures compliance to USB-IF standard
Input based dynamic power management (V_IN-DPM) for protection against poor USB sources
28 V Input lting with over-voltage protection
Integrated dynamic power path management (DPPM) function simultaneously and independently powers the system and charges the battery
System output tracks battery voltage (BQ24072T)
Supports up to 1.5 A charge current with current monitoring output (ISET)
Programmable Input Current Limit up to 1.5 A for wall adapters
Battery disconnect function with SYSOFF input
Reverse current, short-circuit and thermal protection
Flexible voltage based NTC thermistor input
Proprietary start up sequence limits inrush current
Status indication – charging/done, power good
Small 3 mm × 3 mm 16 Lead VQFN Package

Fully Compliant USB Charger
Selectable 100 mA and 500 mA maximum input current
100 mA Maximum current limit ensures compliance to USB-IF standard
Input based dynamic power management (V_IN-DPM) for protection against poor USB sources
28 V Input lting with over-voltage protection
Integrated dynamic power path management (DPPM) function simultaneously and independently powers the system and charges the battery
System output tracks battery voltage (BQ24072T)
Supports up to 1.5 A charge current with current monitoring output (ISET)
Programmable Input Current Limit up to 1.5 A for wall adapters
Battery disconnect function with SYSOFF input
Reverse current, short-circuit and thermal protection
Flexible voltage based NTC thermistor input
Proprietary start up sequence limits inrush current
Status indication – charging/done, power good
Small 3 mm × 3 mm 16 Lead VQFN Package

The BQ2407xT series of devices are integrated Li-ion linear chargers and system power path management devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter and support charge currents up to 1.5A. The input voltage range with input over-voltage protection supports unregulated adapters. The USB input current limit accuracy and start up sequence allow the BQ2407xT to meet USB-IF inrush current specification. Additionally, the input dynamic power management (V_IN - DPM) prevents the charger from crashing incorrectly configure USB sources.

The BQ2407xT features dynamic power path management (DPPM) that powers the system while simultaneously and independently charging the battery. The DPPM circuit reduces the charge current when the input current limit causes the system output to fall to the DPPM threshold; thus, supplying the system load at all times while monitoring the charge current separately. This feature reduces the number of charge and discharge cycles on the battery, allows for proper charge termination and enables the system to run with a defective or absent battery pack.

Additionally, the regulated system input enables instant system turn-on when plugged in even with a totally discharged battery. The power-path management architecture also permits the battery to supplement the system current requirements when the adapter cannot deliver the peak system currents, enabling the use of a smaller adapter.

The battery is charged in three phases: conditioning, constant current, and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if the internal temperature threshold is exceeded. The charger power stage and charge current sense functions are fully integrated. The charger function has high accuracy current and voltage regulation loops, charge status display, and charge termination. The input current limit and charge current are programmable using external resistors.

The BQ2407xT series of devices are integrated Li-ion linear chargers and system power path management devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter and support charge currents up to 1.5A. The input voltage range with input over-voltage protection supports unregulated adapters. The USB input current limit accuracy and start up sequence allow the BQ2407xT to meet USB-IF inrush current specification. Additionally, the input dynamic power management (V_IN - DPM) prevents the charger from crashing incorrectly configure USB sources.

The BQ2407xT features dynamic power path management (DPPM) that powers the system while simultaneously and independently charging the battery. The DPPM circuit reduces the charge current when the input current limit causes the system output to fall to the DPPM threshold; thus, supplying the system load at all times while monitoring the charge current separately. This feature reduces the number of charge and discharge cycles on the battery, allows for proper charge termination and enables the system to run with a defective or absent battery pack.

Additionally, the regulated system input enables instant system turn-on when plugged in even with a totally discharged battery. The power-path management architecture also permits the battery to supplement the system current requirements when the adapter cannot deliver the peak system currents, enabling the use of a smaller adapter.

The battery is charged in three phases: conditioning, constant current, and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if the internal temperature threshold is exceeded. The charger power stage and charge current sense functions are fully integrated. The charger function has high accuracy current and voltage regulation loops, charge status display, and charge termination. The input current limit and charge current are programmable using external resistors.

filter

기타 배터리 충전기 IC 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

4개 모두 보기

	유형	직함		날짜
*	Data sheet	BQ2407xT Standalone 1-Cell 1.5-A Linear Battery Charger with Power Path and Voltage-Based TS datasheet (Rev. C)	PDF \| HTML	2019/08/14
	Application note	Configuring Standalone Linear Power Path Chargers (Rev. A)	PDF \| HTML	2020/04/06
	Application note	Dynamic Power-Path Mgmt & Dynamic Power Mgmt (Rev. A)		2018/05/01
	Application note	Selecting the Best bq2407x/23x Single Cell Battery Charger for your Application		2012/11/08

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

BQ24075TEVM — BQ24075T 평가 모듈

This user’s guide describes the bq24072/3/4/5/9(T) and bq24230/2 (bqTiny-III™) evaluation module (EVM). The EVM provides a convenient method for evaluating the performance of a charge management and system power solution for portable applications using the bq24072/3/4/5/9(T) and (...)

사용 설명서: PDF