BQ25750

Name: BQ25750
Brand: TI
SKU: BQ25750
Price: 3.49 USD

활성

전원 경로를 지원하는 독립형 또는 I²C 제어 70V 양방향 벅 부스트 충전 컨트롤러

지금 주문

데이터 시트

document-pdfAcrobat BQ25750: Standalone/I2C Controlled, 1- to 14-Cell Bidirectional Buck-Boost Battery Charge Controller with Direct Power Path Control datasheet (영어) PDF | HTML

BQ25750

활성

데이터 시트

지금 주문

제품 상세 정보

Number of series cells

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

Charge current (max) (A)

20

Vin (max) (V)

70

Cell chemistry

Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiMH, SuperCap

Battery charge voltage (min) (V)

0

Battery charge voltage (max) (V)

70

Absolute max Vin (max) (V)

85

Control topology

Switch-Mode Buck-boost

Control interface

I2C

Features

Adjustable switching frequency, BAT temp thermistor monitoring (JEITA profile), Bidirectional, IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Power Path, SYNC Pin, Solar input/MPPT, USB C/PD compatible, VINDPM (Input voltage threshold to maximize adaptor power)

Vin (min) (V)

4.2

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Number of series cells

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

Charge current (max) (A)

20

Vin (max) (V)

70

Cell chemistry

Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiMH, SuperCap

Battery charge voltage (min) (V)

0

Battery charge voltage (max) (V)

70

Absolute max Vin (max) (V)

85

Control topology

Switch-Mode Buck-boost

Control interface

I2C

Features

Adjustable switching frequency, BAT temp thermistor monitoring (JEITA profile), Bidirectional, IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Power Path, SYNC Pin, Solar input/MPPT, USB C/PD compatible, VINDPM (Input voltage threshold to maximize adaptor power)

Vin (min) (V)

4.2

Rating

Catalog

Operating temperature range (°C)

-40 to 125

VQFN (RRV)

36

30 mm² 6 x 5

Wide input voltage operating range: 4.2 V to 70 V
Wide battery voltage operating range: up-to 70 V with multi-chemistry support:
- 1- to 14-cell Li-ion charge profile
- 1- to 16-cell LiFePO 4 charge profile
Synchronous buck-boost charge controller with NFET drivers
- Adjustable switching frequency from 200 kHz to 600 kHz
- Optional synchronization to external clock
- Integrated loop compensation with soft start
- Optional gate driver supply input for optimized efficiency
Bidirectional converter operation (Reverse Mode) supporting USB-PD Extended Power Range (EPR)
- Adjustable input voltage (VAC) regulation from 3.3 V to 65 V with 20-mV/step
- Adjustable input current regulation (R AC_SNS) from 400 mA to 20 A with 50-mA/step using 5-mΩ resistor
Direct power path management for highest efficiency to power system
- System power selection from adapter or battery
- Dynamic power management
- All N-channel FET drivers
High accuracy
- ±0.5% charge voltage regulation
- ±3% charge current regulation
- ±3% input current regulation
I 2C controlled for optimal system performance with resistor-programmable option
- Hardware adjustable input and output current limits
Integrated 16-bit ADC for voltage, current, and temperature monitoring
Low battery quiescent current
High safety integration
- Adjustable input overvoltage and undervoltage protection
- Battery overvoltage and overcurrent protection
- Charging safety timer
- Battery short protection
- Thermal shutdown
Status outputs
- Adapter present status ( PG)
- Charger operation status
Package
- 36-pin 5 mm × 6 mm QFN

Wide input voltage operating range: 4.2 V to 70 V
Wide battery voltage operating range: up-to 70 V with multi-chemistry support:
- 1- to 14-cell Li-ion charge profile
- 1- to 16-cell LiFePO 4 charge profile
Synchronous buck-boost charge controller with NFET drivers
- Adjustable switching frequency from 200 kHz to 600 kHz
- Optional synchronization to external clock
- Integrated loop compensation with soft start
- Optional gate driver supply input for optimized efficiency
Bidirectional converter operation (Reverse Mode) supporting USB-PD Extended Power Range (EPR)
- Adjustable input voltage (VAC) regulation from 3.3 V to 65 V with 20-mV/step
- Adjustable input current regulation (R AC_SNS) from 400 mA to 20 A with 50-mA/step using 5-mΩ resistor
Direct power path management for highest efficiency to power system
- System power selection from adapter or battery
- Dynamic power management
- All N-channel FET drivers
High accuracy
- ±0.5% charge voltage regulation
- ±3% charge current regulation
- ±3% input current regulation
I 2C controlled for optimal system performance with resistor-programmable option
- Hardware adjustable input and output current limits
Integrated 16-bit ADC for voltage, current, and temperature monitoring
Low battery quiescent current
High safety integration
- Adjustable input overvoltage and undervoltage protection
- Battery overvoltage and overcurrent protection
- Charging safety timer
- Battery short protection
- Thermal shutdown
Status outputs
- Adapter present status ( PG)
- Charger operation status
Package
- 36-pin 5 mm × 6 mm QFN

The BQ25750 is a wide input voltage, switched-mode buck-boost Li-Ion, Li-polymer, or LiFePO 4 battery charge controller with direct power path control. The device offers high-efficiency battery charging over a wide voltage range with accurate charge current and charge voltage regulation, in addition to automatic charge preconditioning, termination, and charge status indication. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use. In reverse mode, the device draws power from the battery and regulates the SYS terminal voltage.

Besides the I 2C host-controlled charging mode, the device also supports standalone charging mode via resistor programmable limits. Input current, charge current and charge voltage regulation targets can be set via the ILIM_HIZ, ICHG and FB pins, respectively.

The device has three status pins (STAT1, STAT2, and PG) to indicate the charging status and input voltage status. These pins can be used to drive LEDs or communicate with a host processor. If needed, these pins can also be used as general purpose indicators and their status controlled directly by the I2C interface. The INT pin immediately notifies host when the device status changes, including faults.

The device also provides an analog-to-digital converter (ADC) for monitoring input current, charge current and input/battery/system/thermistor voltages.

The device comes with a 36-pin 5.0 mm × 6.0 mm QFN package with 0.5 mm pin pitch.

The BQ25750 is a wide input voltage, switched-mode buck-boost Li-Ion, Li-polymer, or LiFePO 4 battery charge controller with direct power path control. The device offers high-efficiency battery charging over a wide voltage range with accurate charge current and charge voltage regulation, in addition to automatic charge preconditioning, termination, and charge status indication. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use. In reverse mode, the device draws power from the battery and regulates the SYS terminal voltage.

Besides the I 2C host-controlled charging mode, the device also supports standalone charging mode via resistor programmable limits. Input current, charge current and charge voltage regulation targets can be set via the ILIM_HIZ, ICHG and FB pins, respectively.

The device has three status pins (STAT1, STAT2, and PG) to indicate the charging status and input voltage status. These pins can be used to drive LEDs or communicate with a host processor. If needed, these pins can also be used as general purpose indicators and their status controlled directly by the I2C interface. The INT pin immediately notifies host when the device status changes, including faults.

The device also provides an analog-to-digital converter (ADC) for monitoring input current, charge current and input/battery/system/thermistor voltages.

The device comes with a 36-pin 5.0 mm × 6.0 mm QFN package with 0.5 mm pin pitch.

filter

기타 배터리 충전기 IC 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

4개 모두 보기

	유형	직함		날짜
*	Data sheet	BQ25750: Standalone/I2C Controlled, 1- to 14-Cell Bidirectional Buck-Boost Battery Charge Controller with Direct Power Path Control datasheet	PDF \| HTML	2023/12/05
	Application note	How to Charge With Smart Battery Using MCU in Between to Translate SMBus/I2C	PDF \| HTML	2024/08/09
	EVM User's guide	BQ25750 Evaluation Module (Rev. A)	PDF \| HTML	2023/11/30
	Certificate	BQ25750EVM EU Declaration of Conformity (DoC)		2023/10/31

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

BQ25750EVM — 독립형 또는 I²C 제어 70V 양방향 벅-부스트 컨트롤러용 BQ25750 평가 모듈

BQ25750EVM 평가 모듈(EVM)은 직접 전원 경로 제어를 지원하는 벅-부스트 배터리 충전 컨트롤러인 BQ25750 IC용의 완전한 평가 시스템입니다. BQ25750은 4.2V~70V의 넓은 입력 범위, 최대 70V의 넓은 출력 전압 범위, 양방향 기능을 갖추고 있습니다. BQ25750EVM은 최대 입력 및 출력이 55 V이며 최대 충전 전류는 10A입니다.

사용 설명서: PDF | HTML

TI.com에서 구매 불가

애플리케이션 소프트웨어 및 프레임워크

TI-CHARGER-GUI — USB2ANY 및 배터리 충전 평가 모듈과 함께 사용하기 위한 GUI 소프트웨어

TI-CHARGER-GUI는 배터리 충전기 제품의 평가, 설계, 구성 또는 테스트 프로세스를 지원하는 웹 기반 또는 독립형 그래픽 사용자 인터페이스를 제공합니다. 이 소프트웨어는 레지스터에 대한 완전한 액세스 기능과 명령 전송을 위한 간편한 인터페이스를 제공합니다.

클라우드에서 평가

패키지	핀	CAD 기호, 풋프린트 및 3D 모델
VQFN (RRV)	36	Ultra Librarian

TI의 평가 항목에 대한 표준 약관이 적용됩니다.

BQ25750

전원 경로를 지원하는 독립형 또는 I²C 제어 70V 양방향 벅 부스트 충전 컨트롤러

BQ25750

제품 상세 정보

기술 자료

설계 및 개발

BQ25750EVM — 독립형 또는 I²C 제어 70V 양방향 벅-부스트 컨트롤러용 BQ25750 평가 모듈

TI-CHARGER-GUI — USB2ANY 및 배터리 충전 평가 모듈과 함께 사용하기 위한 GUI 소프트웨어

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

비디오 시리즈

동영상