LM324-MIL
- Wide Supply Ranges
- Single Supply: 3 V to 32 V
- Dual Supplies: ±1.5 V to ±16 V
- Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA Typical - Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
- Low Input Bias and Offset Parameters
- Input Offset Voltage: 3 mV Typical
- Input Offset Current: 2 nA Typical
- Input Bias Current: 20 nA Typical
- Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage:
32 V - Open-Loop Differential Voltage Amplification:
100 V/mV Typical - Internal Frequency Compensation
- On Products Compliant to MIL-PRF-38535,
All Parameters are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
This device consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
10개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM324-MIL Quadruple Operational Amplifier datasheet | PDF | HTML | 2017/06/21 |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017/03/28 | ||
| Application note | AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B) | 2013/05/06 | ||
| Application note | AN-262 Applying Dual and Quad FET Op Amps (Rev. B) | 2013/05/06 | ||
| Application note | AN-260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter (Rev. B) | 2013/05/05 | ||
| Application note | AN-30 Log Converters (Rev. B) | 2013/05/01 | ||
| Application note | AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B) | 2013/05/01 | ||
| Application note | AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B) | 2013/04/23 | ||
| Application note | AN-263 Sine Wave Generation Techniques (Rev. C) | 2013/04/22 | ||
| Application note | Audio Applications of Linear Integrated Circuits | 2004/05/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WAFERSALE (YS) | — |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치