首頁 無線連線 Sub-1 GHz 產品 Sub-1 GHz 收發器
首頁
無線連線
Sub-1 GHz 產品
Sub-1 GHz 收發器

CC1070

不推薦在新設計中採用

適用窄頻和多通道應用的單晶片、低功率、低成本 CMOS FSK/GFSK/ASK/00K RF 發送器

立即訂購
產品規格表
勘誤表

CC1070

不推薦在新設計中採用
產品規格表 立即訂購

產品詳細資料

Protocols Proprietary Modulation scheme 2(G)FSK, ASK, OOK Frequency bands 402-470, 804-940 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.1536 Rating Catalog Operating temperature range (°C) -40 to 85
Protocols Proprietary Modulation scheme 2(G)FSK, ASK, OOK Frequency bands 402-470, 804-940 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.1536 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGW) 20 25 mm² 5 x 5 VQFN (RSQ) 20 25 mm² 5 x 5
  • True single chip UHF RF transmitter
  • Frequency range 402 - 470 MHz and 804 - 940 MHz
  • Programmable output power
  • Low supply voltage (2.3 to 3.6 V)
  • Very few external components required
  • Small size (QFN 20 package)
  • Pb-free package
  • Data rate up to 153.6 kBaud
  • OOK, FSK and GFSK data modulation
  • Fully on-chip VCO
  • Programmable frequency makes crystal temperature drift compensation
    possible without TCXO
  • Suitable for frequency hopping systems
  • Suited for systems targeting compliance with EN 300 220, FCC
    CFR47 part 15 and ARIB STD T-67
  • Development kit available
  • Easy-to-use software for generating the CC1070 configuration data
  • Applications
    • Narrowband low power UHF wireless data transmitters
    • 402 / 424 / 426 / 429 / 433 / 447 / 449 / 469 / 868
      and 915 MHz ISM/SRD band systems
    • TPMS – Tire Pressure Monitoring Systems
    • AMR – Automatic Meter Reading
    • Wireless alarm and security systems
    • Home automation
    • Low power telemetry
  • True single chip UHF RF transmitter
  • Frequency range 402 - 470 MHz and 804 - 940 MHz
  • Programmable output power
  • Low supply voltage (2.3 to 3.6 V)
  • Very few external components required
  • Small size (QFN 20 package)
  • Pb-free package
  • Data rate up to 153.6 kBaud
  • OOK, FSK and GFSK data modulation
  • Fully on-chip VCO
  • Programmable frequency makes crystal temperature drift compensation
    possible without TCXO
  • Suitable for frequency hopping systems
  • Suited for systems targeting compliance with EN 300 220, FCC
    CFR47 part 15 and ARIB STD T-67
  • Development kit available
  • Easy-to-use software for generating the CC1070 configuration data
  • Applications
    • Narrowband low power UHF wireless data transmitters
    • 402 / 424 / 426 / 429 / 433 / 447 / 449 / 469 / 868
      and 915 MHz ISM/SRD band systems
    • TPMS – Tire Pressure Monitoring Systems
    • AMR – Automatic Meter Reading
    • Wireless alarm and security systems
    • Home automation
    • Low power telemetry

CC1070 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 402, 424, 426, 429, 433, 447, 449, 469, 868 and 915 MHz, but can easily be programmed for multi-channel operation at other frequencies in the 402 - 470 and 804 - 940 MHz range.

The CC1070 is especially suited for narrowband systems with channel spacings of 12.5 or 25 kHz complying with ARIB STD T-67 and EN 300 220.

The CC1070 main operating parameters can be programmed via a serial bus, thus making CC1070 a very flexible and easy to use transmitter. In a typical application CC1070 will be used together with a microcontroller and a few external passive components.

CC1070 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 402, 424, 426, 429, 433, 447, 449, 469, 868 and 915 MHz, but can easily be programmed for multi-channel operation at other frequencies in the 402 - 470 and 804 - 940 MHz range.

The CC1070 is especially suited for narrowband systems with channel spacings of 12.5 or 25 kHz complying with ARIB STD T-67 and EN 300 220.

The CC1070 main operating parameters can be programmed via a serial bus, thus making CC1070 a very flexible and easy to use transmitter. In a typical application CC1070 will be used together with a microcontroller and a few external passive components.
filter 尋找其它 Sub-1 GHz 收發器
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet Single-Chip Low Power RF Transmitter for Narrowband Systems datasheet (Rev. A) 2010年 1月 6日
* Radiation & reliability report CC1070 Reliability Report 2006年 4月 28日
* Errata CC1070 Errata Notes 2006年 1月 31日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點