程式碼範例或展示
CC110L
- RF Performance
- Programmable Output Power up to +12 dBm
- Receive Sensitivity Down to −116 dBm at
0.6 kbps - Programmable Data Rate from 0.6 to 600 kbps
- Frequency Bands: 300–348 MHz,
387–464 MHz, and 779–928 MHz - 2-FSK, 4-FSK, GFSK, MSK, and OOK Supported
- Digital Features
- Flexible Support for Packet Oriented Systems
- On-chip Support for Sync Word Insertion, Flexible Packet Length, and Automatic CRC Calculation
- Low-Power Features
- 200-nA Sleep Mode Current Consumption
- Fast Startup Time; 240 μs From Sleep to RX Mode or TX Mode
- 64-Byte RX and TX FIFO
- Improved Range Using CC1190
- The CC1190 is a Range Extender for
850–950 MHz and is an Ideal Fit for CC110L to Enhance RF Performance - High Sensitivity
- –118 dBm at 1.2 kBaud, 868 MHz, 1% Packet Error Rate
- –120 dBm at 1.2 kBaud, 915 MHz, 1% Packet Error Rate
- +20-dBm Output Power at 868 MHz
- +26-dBm Output Power at 915 MHz
- The CC1190 is a Range Extender for
- General
- Few External Components; Completely On-chip Frequency Synthesizer, No External Filters or RF Switch Needed
- Green Package: RoHS Compliant and No Antimony or Bromine
- Small Size (QLP 4- x 4-mm Package, 20 Pins)
- Suited for Systems Targeting Compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US)
- Support for Asynchronous and Synchronous Serial Transmit Mode for Backward Compatibility with Existing Radio Communication Protocols
The CC110L is a cost optimized sub-1 GHz RF transceiver for the 300–348 MHz, 387–464 MHz, and 779–928 MHz frequency bands. The circuit is based on the popular CC1101 RF transceiver, and RF performance characteristics are identical. Two CC110L transceivers together enable a low-cost bidirectional RF link.
The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 600 kbps.
The CC110L provides extensive hardware support for packet handling, data buffering, and burst transmissions.
The main operating parameters and the 64-byte receive and transmit FIFOs of CC110L can be controlled through a serial peripheral interface (SPI). In a typical system, the CC110L will be used together with a microcontroller and a few additional passive components.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 11 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | CC110L Value Line Transceiver datasheet (Rev. C) | PDF | HTML | 2016年 12月 12日 |
| * | Errata | CC110L Errata Notes | 2011年 5月 26日 | |
| Selection guide | 無線連線技術選擇指南 (Rev. B) | 2022年 3月 7日 | ||
| Application note | Debugging Communication Range (Rev. A) | PDF | HTML | 2019年 5月 23日 | |
| White paper | Migrating your proprietary solution to the SimpleLink™ WMCU | 2018年 11月 7日 | ||
| Application note | CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) | 2017年 10月 2日 | ||
| Application note | CC112x-CC1190 Boost Software Examples | 2015年 10月 19日 | ||
| Application note | TI LPRF EASYMODE | 2014年 12月 12日 | ||
| Application note | Antenna Diversity | 2014年 10月 23日 | ||
| Application note | DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz | 2012年 11月 27日 | ||
| More literature | CC110L BoosterPack Quick Start Guide (Rev. B) | 2011年 12月 19日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
SMARTRFTRXEBK — SmartRF 收發器評估板
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- (...)
使用指南: PDF
偵錯探測器
CC-DEBUGGER — 適用於射頻系統單晶片的偵錯器和程式設計工具
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
使用指南: PDF
介面轉接器
BOOST-CCEMADAPTER — EM 變壓器 BoosterPack
The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the wide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the (...)
支援軟體
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
支援產品和硬體
產品
低耗電 2.4-GHz 產品
Sub-1 GHz 無線 MCU
Sub-1 GHz 收發器
其它無線產品
汽車無線連線產品
硬體開發
開發板
開發套件
軟體
軟體程式設計工具
計算工具
驅動程式或資料庫
支援軟體
RF-RANGE-ESTIMATOR — RF Range Estimator
This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
支援產品和硬體
產品
低耗電 2.4-GHz 產品
Sub-1 GHz 無線 MCU
Sub-1 GHz 收發器
汽車無線連線產品
硬體開發
開發板
軟體
計算工具
支援軟體
SWRC219 — TrxEB RF PER Test Software
支援產品和硬體
產品
Sub-1 GHz 收發器
硬體開發
開發套件
計算工具
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支援產品和硬體
產品
MSP430 微控制器
低耗電 2.4-GHz 產品
Sub-1 GHz 無線 MCU
Sub-1 GHz 收發器
其它無線產品
汽車無線連線產品
硬體開發
開發套件
開發板
介面轉接器
子卡
設計工具
3P-WIRELESS-MODULES — 第三方無線模組搜尋工具
The third party wireless module search tool helps developers to identify products that meet their end equipment specifications and procure production ready wireless modules. The third party module vendors included in the search tool are independent third party companies with expertise in designing (...)
設計工具
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 裝置的硬體設計審核
To get started with the SimpleLink™ Sub-1GHz hardware design review process:
- Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC1xxx product page links below).
- Step 2: (...)
參考設計
TIDM-LPBP-WIRELESSNODE — 低功耗 (低於 1 GHz) 無線收發器
The Low-Power Sub-1 GHz Wireless Transceiver reference design enables a low cost bi-directional RF link (when using two transceivers). The on-board Anaren Integrated Radio (AIR) A110LR09A radio module with integrated antenna operates in the European 868-870MHz and US 902-928MHz ISM bands. The (...)
參考設計
TIDM-LPBP-EMADAPTER — 評估模組 (EM) 轉接器
This BoosterPack kit contains one "EM Adapter BoosterPack". The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the vide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific (...)
電路圖: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGP) | 20 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。