支援軟體
產品規格表
CC1021
- True Single-Chip UHF RF Transceiver
- Frequency Range 402 MHz to 470 MHz and
804 MHz to 930 MHz - High Sensitivity
- Up to –112 dBm for 38.4 kHz Receiver Channel Filter Bandwidth
- Up to –106 dBm for 102.4 kHz Receiver Channel Filter Bandwidth
- Programmable Output Power
- Low Current Consumption
- RX: 19.9 mA
- Low Supply Voltage
- From 2.3 V to 3.6 V
- Very Few External Components Required
- Small Size
- QFN 32 Package
- Pb-Free Package
- Digital RSSI and Carrier Sense Indicator
- Data Rate Up to 153.6 kBaud
- OOK, FSK, and GFSK Data Modulation
- Integrated Bit Synchronizer
- Image Rejection Mixer
- Programmable Frequency
- Automatic Frequency Control (AFC)
- Suitable for Frequency Hopping Systems
- Suited for Systems Targeting Compliance With
EN 300 220 and FCC CFR47 Part 15 - Easy-to-Use Software for Generating the CC1021 Configuration Data
- Fully Compatible With CC1020 for Receiver Channel Filter Bandwidths of 38.4 kHz and Higher
The CC1021 device is a true single-chip UHF transceiver designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 433 MHz, 868 MHz, and 915 MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 930-MHz range.
The CC1021 device is especially suited for narrowband systems with channel spacing of 50 kHz and higher complying with EN 300 220 and CC CFR47 part 15.
The CC1021 device main operating parameters can be programmed through a serial bus, thus making the CC1021 device a very flexible and easy to use transceiver.
In a typical system, the CC1021 device is used together with a microcontroller and a few external passive components.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 11 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | CC1021 Single-Chip Low-Power RF Transceiver for Narrowband Systems datasheet (Rev. F) | PDF | HTML | 2018年 10月 31日 |
| * | Errata | CC1021 Errata Notes | 2006年 1月 31日 | |
| * | Radiation & reliability report | CC1021 Reliability Report | 2006年 4月 28日 | |
| Application note | DN035 -- Antenna Quick Guide (Rev. B) | 2022年 2月 9日 | ||
| Application note | DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) | 2013年 2月 22日 | ||
| Application note | AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) | 2012年 8月 2日 | ||
| Application note | DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) | 2011年 8月 30日 | ||
| Application note | AN058 -- Antenna Selection Guide (Rev. B) | 2010年 10月 6日 | ||
| Application note | DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary | 2010年 8月 26日 | ||
| More literature | CC1021 Material content | 2007年 7月 16日 | ||
| More literature | CC1021 RoHS Confirmation | 2006年 1月 31日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
計算工具
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支援產品和硬體
產品
MSP430 微控制器
低耗電 2.4-GHz 產品
Sub-1 GHz 無線 MCU
Sub-1 GHz 收發器
其它無線產品
汽車無線連線產品
硬體開發
開發套件
開發板
介面轉接器
子卡
設計工具
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 裝置的硬體設計審核
To get started with the SimpleLink™ Sub-1GHz hardware design review process:
- Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC1xxx product page links below).
- Step 2: (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RSS) | 32 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點