首頁 交換器與多工器 類比交換器與多工器
首頁
交換器與多工器
類比交換器與多工器

TMUX1208-Q1

現行

具有 1.8V 邏輯元件的車用 5V、8:1、單通道多工器

立即訂購
產品規格表

TMUX1208-Q1

現行
產品規格表 立即訂購

產品詳細資料

Configuration 8:1 Number of channels 1 Power supply voltage - single (V) 1.2, 1.8, 2.5, 3.3, 5 Protocols Analog Ron (typ) (Ω) 5 CON (typ) (pF) 85 ON-state leakage current (max) (µA) 0.75 Supply current (typ) (µA) 0.02 Bandwidth (MHz) 65 Operating temperature range (°C) -40 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Input/output continuous current (max) (mA) 30 Rating Automotive Drain supply voltage (max) (V) 5.5 Supply voltage (max) (V) 5.5
Configuration 8:1 Number of channels 1 Power supply voltage - single (V) 1.2, 1.8, 2.5, 3.3, 5 Protocols Analog Ron (typ) (Ω) 5 CON (typ) (pF) 85 ON-state leakage current (max) (µA) 0.75 Supply current (typ) (µA) 0.02 Bandwidth (MHz) 65 Operating temperature range (°C) -40 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Input/output continuous current (max) (mA) 30 Rating Automotive Drain supply voltage (max) (V) 5.5 Supply voltage (max) (V) 5.5
UQFN (RSV) 16 4.68 mm² 2.6 x 1.8
  • AEC-Q100 Qualified for Automotive Applications
    • Temperature Grade 1: –40°C to 125°C, TA
  • Low On-resistance: 5 Ω
  • Wide Supply Range: 1.08 V to 5.5 V
  • Rail to Rail Operation
  • Bidirectional Signal Path
  • 1.8 V Logic Compatible
  • Fail-Safe Logic
  • Low Supply Current: 10 nA
  • Transition Time: 14 ns
  • Break-before-make Switching
  • ESD Protection HBM: 2000 V
  • Small QFN Package
  • AEC-Q100 Qualified for Automotive Applications
    • Temperature Grade 1: –40°C to 125°C, TA
  • Low On-resistance: 5 Ω
  • Wide Supply Range: 1.08 V to 5.5 V
  • Rail to Rail Operation
  • Bidirectional Signal Path
  • 1.8 V Logic Compatible
  • Fail-Safe Logic
  • Low Supply Current: 10 nA
  • Transition Time: 14 ns
  • Break-before-make Switching
  • ESD Protection HBM: 2000 V
  • Small QFN Package

The TMUX1208-Q1 is a general purpose complementary metal-oxide semiconductor (CMOS) multiplexer (MUX). The TMUX1208-Q1 is an 8:1 mux configuration allowing 8 different signal paths to be switched to a common output pin . Wide operating supply of 1.08 V to 5.5 V allows for use in automotive applications with varying power supply requirements. The device supports bidirectional analog and digital signals on the source (Sx) and drain (D) pins ranging from GND to VDD.

The TMUX1208-Q1 comes in a small QFN package to enable reduced system size requirements. The device has low on-resistance of 5Ω typical to minimize the impact of distortion and signal integrity issues when the device is not connected to a high impedance signal path.

All logic inputs have 1.8 V logic compatible thresholds, ensuring both TTL and CMOS logic compatibility when operating in the valid supply voltage range. Fail-Safe Logic circuitry allows voltages on the control pins to be applied before the supply pin, protecting the device from potential damage.

The TMUX1208-Q1 is a general purpose complementary metal-oxide semiconductor (CMOS) multiplexer (MUX). The TMUX1208-Q1 is an 8:1 mux configuration allowing 8 different signal paths to be switched to a common output pin . Wide operating supply of 1.08 V to 5.5 V allows for use in automotive applications with varying power supply requirements. The device supports bidirectional analog and digital signals on the source (Sx) and drain (D) pins ranging from GND to VDD.

The TMUX1208-Q1 comes in a small QFN package to enable reduced system size requirements. The device has low on-resistance of 5Ω typical to minimize the impact of distortion and signal integrity issues when the device is not connected to a high impedance signal path.

All logic inputs have 1.8 V logic compatible thresholds, ensuring both TTL and CMOS logic compatibility when operating in the valid supply voltage range. Fail-Safe Logic circuitry allows voltages on the control pins to be applied before the supply pin, protecting the device from potential damage.
filter 尋找其它 類比交換器與多工器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
TMUX4051-Q1 現行 具有 1.8-V 相容邏輯元件的車用 ±12-V、8:1 單通道多工器 ±24-V mux 

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TMUX1208-Q1 5-V Bidirectional 8:1 Multiplexer with 1.8-V Logic datasheet (Rev. A) 2020年 7月 24日
Functional safety information TMUX1208-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2024年 9月 26日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

介面轉接器

LEADLESS-ADAPTER1 — 用於測試 TI 的 6、8、10、12、14、16 和 20 針腳無引線封裝的表面貼裝至 DIP 接頭適配器

The EVM-LEADLESS1 board allows for quick testing and bread boarding of TI's common leadless packages.  The board has footprints to convert TI's DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW RTE, RTJ, RUK , RUC, RUG, RUM,RUT and YZP surface mount packages to 100mil DIP headers.
使用指南: PDF
TI.com 無法提供
模擬型號

TMUX1208 PSpice Model

SCDM214.ZIP (98 KB) - PSpice Model
下載
模擬型號

TMUX1208QRSVRQ1 IBIS Model

SCDM239.ZIP (8 KB) - IBIS Model
下載
參考設計

PMP22650 — GaN 式 6.6-kW 雙向車載充電器參考設計

PMP22650 參考設計為 6.6-kW 雙向車載充電器。此設計採用雙相圖騰柱 PFC 與具同步整流的全橋 CLLLC 轉換器。CLLLC 利用頻率和相位調變來調節所需調節範圍內的輸出。此設計在 TMS320F28388D 微控制器中使用單一處理核心，以控制 PFC 和 CLLLC 二者。同步整流可透過與 Rogowski 線圈電流感測器相同的微控制器實作。透過使用高速 GaN 開關 (LMG3522) 可實現高密度。PFC 以 120 kHz 運作，CLLLC 則以 200 kHz 至 800 kHz 的可變頻率運作。開放訊框功率密度 3.8 kW/L 實現 96.5% (...)
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
UQFN (RSV) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片