TMUX136

現行

具有斷電保護功能的 1.4pF 開啟狀態電容、5V、2:1 (SPDT)、雙通道類比開關

立即訂購

產品規格表

document-pdfAcrobat TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E) (英文) PDF | HTML

TMUX136

現行

產品規格表

立即訂購

產品詳細資料

Configuration

2:1 SPDT

Number of channels

2

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog, I2C, I3C, LVDS, UART

Ron (typ) (Ω)

4.6

CON (typ) (pF)

1.4

ON-state leakage current (max) (µA)

2

Supply current (typ) (µA)

30

Bandwidth (MHz)

6100

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Powered-off protection

Input/output continuous current (max) (mA)

20

Rating

Catalog

Drain supply voltage (max) (V)

4.8

Supply voltage (max) (V)

4.8

Configuration

2:1 SPDT

Number of channels

2

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog, I2C, I3C, LVDS, UART

Ron (typ) (Ω)

4.6

CON (typ) (pF)

1.4

ON-state leakage current (max) (µA)

2

Supply current (typ) (µA)

30

Bandwidth (MHz)

6100

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Powered-off protection

Input/output continuous current (max) (mA)

20

Rating

Catalog

Drain supply voltage (max) (V)

4.8

Supply voltage (max) (V)

4.8

UQFN (RSE)

10

3 mm² 2 x 1.5

V CC range 2.3 V to 4.8 V
High performance switch characteristics:
- Bandwidth (–3 dB): 6.1 GHz
- R ON (typical): 5.7 Ω
- C ON (typical): 1.6 pF
Current consumption: 30 µA (typical)
Special features:
- I OFF protection prevents current leakage in Powered-Down state
- 1.8-V compatible control inputs (SEL, EN)
Flow-through pinout simplifies PCB layout
Compatible with high-speed I 3C signals
ESD performance:
- 5-kV Human Body Model (A114B, Class II)
- 1-kV Charged-Device Model (C101)
Compact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch)

V CC range 2.3 V to 4.8 V
High performance switch characteristics:
- Bandwidth (–3 dB): 6.1 GHz
- R ON (typical): 5.7 Ω
- C ON (typical): 1.6 pF
Current consumption: 30 µA (typical)
Special features:
- I OFF protection prevents current leakage in Powered-Down state
- 1.8-V compatible control inputs (SEL, EN)
Flow-through pinout simplifies PCB layout
Compatible with high-speed I 3C signals
ESD performance:
- 5-kV Human Body Model (A114B, Class II)
- 1-kV Charged-Device Model (C101)
Compact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch)

The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.

The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.

The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.

The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.

filter

尋找其它類比交換器與多工器

下載觀看有字幕稿的影片影片

查看 TI.com 庫存中的類似產品

規格相似的產品依可用的 TI.com 庫存排序。

立即檢視

您可能會感興趣的類似產品

open-in-new

比較替代產品

功能相同，但引腳輸出與所比較的裝置不同

TMUX121

現行

具 1.8-V 相容邏輯的 2-pF、3.3-V、2:1 (SPDT)、2 通道開關 Supply device with compatible control inputs and powered-off protection

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 9

	類型	標題		日期
*	Data sheet	TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E)	PDF \| HTML	2023年 6月 5日
	Application note	Designing with Multiple Multiplexers in Series: A Guide to Cascading Multiplexers	PDF \| HTML	2024年 1月 31日
	Application brief	Important Multiplexer Characteristics for I3C Applications	PDF \| HTML	2023年 7月 27日
	Application brief	Best Practices: I2C Devices on an I3C Shared Bus	PDF \| HTML	2023年 3月 30日
	Application brief	1.8-V Logic for Multiplexers and Signal Switches (Rev. C)	PDF \| HTML	2022年 7月 26日
	Application note	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	2022年 6月 2日
	Application note	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	2021年 12月 1日
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	2021年 1月 6日
	Application brief	Improve Stability Issues with Low Con Multiplexers (Rev. A)		2018年 12月 10日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

介面轉接器

LEADLESS-ADAPTER1 — 用於測試 TI 的 6、8、10、12、14、16 和 20 針腳無引線封裝的表面貼裝至 DIP 接頭適配器

The EVM-LEADLESS1 board allows for quick testing and bread boarding of TI's common leadless packages. The board has footprints to convert TI's DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW RTE, RTJ, RUK , RUC, RUG, RUM,RUT and YZP surface mount packages to 100mil DIP headers.

使用指南: PDF