產品詳細資料

Configuration 1:1 SPST Number of channels 32 Power supply voltage - single (V) 5 Protocols Analog Operating temperature range (°C) -40 to 85 Features 1.8-V compatible control inputs, Daisy chain mode, Integrated bleed resistors on the outputs, Supports input voltage beyond supply Rating Catalog Supply voltage (max) (V) 5.5
Configuration 1:1 SPST Number of channels 32 Power supply voltage - single (V) 5 Protocols Analog Operating temperature range (°C) -40 to 85 Features 1.8-V compatible control inputs, Daisy chain mode, Integrated bleed resistors on the outputs, Supports input voltage beyond supply Rating Catalog Supply voltage (max) (V) 5.5
NFBGA (ZEH) 83 56.25 mm² 7.5 x 7.5
  • Only +5 V bias supply required
    • Very low power: 9.5 mW (typ) all 32CH switching at 50 kHz
  • Wide input signal range:
    • Up to ±110 V, 220 V PP
    • ±120 V, 240 V PP voltage overshoots supported
  • Low off capacitance: 10.6 pF
  • Low on resistance
  • Up to 100 MHz data shift clock frequency
  • Logic levels: 1.8 V to 5 V
  • Integrated NDIN to invert input data polarity
  • Fast turn-on time: 3 µs (maximum)
  • Excellent HD2PC performance: -65 dB at 5 MHz
  • Small BGA and QFN package options with optimized pin-out
  • Integrated thermal shutdown for improved system reliability
  • Integrated bleed resistors on the outputs
  • Latch-up immunity by device construction
  • Extended temperature range: –40°C to 125°C
  • Only +5 V bias supply required
    • Very low power: 9.5 mW (typ) all 32CH switching at 50 kHz
  • Wide input signal range:
    • Up to ±110 V, 220 V PP
    • ±120 V, 240 V PP voltage overshoots supported
  • Low off capacitance: 10.6 pF
  • Low on resistance
  • Up to 100 MHz data shift clock frequency
  • Logic levels: 1.8 V to 5 V
  • Integrated NDIN to invert input data polarity
  • Fast turn-on time: 3 µs (maximum)
  • Excellent HD2PC performance: -65 dB at 5 MHz
  • Small BGA and QFN package options with optimized pin-out
  • Integrated thermal shutdown for improved system reliability
  • Integrated bleed resistors on the outputs
  • Latch-up immunity by device construction
  • Extended temperature range: –40°C to 125°C

The TMUX9832 is a 32-channel low harmonic distortion, low resistance, low capacitance high-voltage analog switch integrated circuit (IC) with latch-up immunity. Each device has 32 independently selectable 1:1, single-pole, single-throw (SPST) switch channels. The device only requires a +5 V supply, while still being able to support ±110 V analog signals. TMUX9832 also integrates bleed resistors on its drain (Dx) pins to discharge capacitive loads, like piezoelectric transducers. TMUX9832 is designed for medical ultrasound imaging and other piezoelectric transducer driver applications.

TMUX9832 integrates cascadable 32-bit shift register with latches for controlling each of the 32 switches. The daisy chain capability allows for many TMUX9832 devices to be controlled without requiring a separate chip-select for every device. To reduce noise in the signal path due to potential clock feed-through, the active low latch enable can be held high while data is loaded into the shift registers. The 32-bit shift register can operate off of a 1.8 V – 5 V power supply and support clock speeds up to 100 MHz.

The TMUX9832 is a 32-channel low harmonic distortion, low resistance, low capacitance high-voltage analog switch integrated circuit (IC) with latch-up immunity. Each device has 32 independently selectable 1:1, single-pole, single-throw (SPST) switch channels. The device only requires a +5 V supply, while still being able to support ±110 V analog signals. TMUX9832 also integrates bleed resistors on its drain (Dx) pins to discharge capacitive loads, like piezoelectric transducers. TMUX9832 is designed for medical ultrasound imaging and other piezoelectric transducer driver applications.

TMUX9832 integrates cascadable 32-bit shift register with latches for controlling each of the 32 switches. The daisy chain capability allows for many TMUX9832 devices to be controlled without requiring a separate chip-select for every device. To reduce noise in the signal path due to potential clock feed-through, the active low latch enable can be held high while data is loaded into the shift registers. The 32-bit shift register can operate off of a 1.8 V – 5 V power supply and support clock speeds up to 100 MHz.

下載 觀看有字幕稿的影片 影片
要求更多資訊

提供完整的產品規格表和其他文件、資源。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TMUX9832 No High Voltage Bias, Beyond the Supply, 220 V 1:1, 32-Channel SwitchWith Latch-Up Immunity datasheet PDF | HTML 2023年 6月 19日
White paper Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) PDF | HTML 2024年 4月 30日
Product overview Optimizing the Size of Handheld Ultrasound Front-End Circuit Designs PDF | HTML 2023年 12月 15日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

TMUX9823 IBIS Model

SCDM328.ZIP (37 KB) - IBIS Model
封裝 針腳 CAD 符號、佔位空間與 3D 模型
NFBGA (ZEH) 83 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片