Startseite Audio Audioverstärker Lautsprecherverstärker
Startseite
Audio
Audioverstärker
Lautsprecherverstärker

LM4947

AKTIV

2,2-W-Mono-Klasse-D-Verstärker mit Analog-Eingang, 87-mW-Kopfhörerverstärker und 3D-Erweiterung

Jetzt bestellen
Datenblatt

LM4947

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 8 Output power (W) 1.19 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 4.5 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 79 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 8 Output power (W) 1.19 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 4.5 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 79 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • I2C Control Interface
  • I2C Programmable Texas Instruments 3D Audio
  • I2C Controlled 32 Step Digital Volume Control (-59.5dB to +18dB)
  • Three Independent Volume Channels (Left, Right, Mono)
  • Eight Distinct Output Modes
  • Small, 25–Bump DSBGA Packaging
  • “Click and Pop” Suppression Circuitry
  • Thermal Shutdown Protection
  • Low Shutdown Current (0.1μA, typ)
  • RF Suppression
  • Differential Mono and Stereo Inputs
  • Stereo Input Mux

Key Specifications

  • THD+N at 1kHz, 500mW into 8Ω BTL (3.3V): 1.0% (typ)
  • THD+N at 1kHz, 37mW into 32Ω SE (3.3V): 1.0% (typ)
  • Single Supply Operation (VDD): 2.7 to 5.5 V
  • I2C Single Supply Operation: 2.2 to 5.5 V

All trademarks are the property of their respective owners.

  • I2C Control Interface
  • I2C Programmable Texas Instruments 3D Audio
  • I2C Controlled 32 Step Digital Volume Control (-59.5dB to +18dB)
  • Three Independent Volume Channels (Left, Right, Mono)
  • Eight Distinct Output Modes
  • Small, 25–Bump DSBGA Packaging
  • “Click and Pop” Suppression Circuitry
  • Thermal Shutdown Protection
  • Low Shutdown Current (0.1μA, typ)
  • RF Suppression
  • Differential Mono and Stereo Inputs
  • Stereo Input Mux

Key Specifications

  • THD+N at 1kHz, 500mW into 8Ω BTL (3.3V): 1.0% (typ)
  • THD+N at 1kHz, 37mW into 32Ω SE (3.3V): 1.0% (typ)
  • Single Supply Operation (VDD): 2.7 to 5.5 V
  • I2C Single Supply Operation: 2.2 to 5.5 V

All trademarks are the property of their respective owners.

The LM4947 is an audio subsystem capable of efficiently delivering 500mW (Class D operation) of continuous average power into a mono 8Ω bridged-tied load (BTL) with 1% THD+N, 37mW (Class AB operation) power channel of continuous average power into stereo 32Ω single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical specification as the SE configuration, from a 3.3V power supply.

The LM4947 has six input channels: one pair for a two-channel stereo signal, the second pair for a secondary two-channel stereo input, and the third pair for a differential single-channel mono input. Additionally, the two sets of stereo inputs may be configured as a single stereo differential input (differential left and differential right). The LM4947 features a 32-step digital volume control and eight distinct output modes. The digital volume control, 3D enhancement, and output modes are programmed through a two-wire I2C compatible interface that allows flexibility in routing and mixing audio channels.

The RF suppression circuitry in the LM4947 makes it well-suited for GSM mobile phones and other portable applications in which strong RF signals generated by an antenna (and long output traces) may couple audibly into the amplifier.

The LM4947 is designed for cellular phones, PDAs, and other portable handheld applications. It delivers high quality output power from a surface-mount package and requires only eight external components in the OCL mode (two additional components in SE mode).

The LM4947 is an audio subsystem capable of efficiently delivering 500mW (Class D operation) of continuous average power into a mono 8Ω bridged-tied load (BTL) with 1% THD+N, 37mW (Class AB operation) power channel of continuous average power into stereo 32Ω single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical specification as the SE configuration, from a 3.3V power supply.

The LM4947 has six input channels: one pair for a two-channel stereo signal, the second pair for a secondary two-channel stereo input, and the third pair for a differential single-channel mono input. Additionally, the two sets of stereo inputs may be configured as a single stereo differential input (differential left and differential right). The LM4947 features a 32-step digital volume control and eight distinct output modes. The digital volume control, 3D enhancement, and output modes are programmed through a two-wire I2C compatible interface that allows flexibility in routing and mixing audio channels.

The RF suppression circuitry in the LM4947 makes it well-suited for GSM mobile phones and other portable applications in which strong RF signals generated by an antenna (and long output traces) may couple audibly into the amplifier.

The LM4947 is designed for cellular phones, PDAs, and other portable handheld applications. It delivers high quality output power from a surface-mount package and requires only eight external components in the OCL mode (two additional components in SE mode).
filter Andere Lautsprecherverstärker suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet LM4947 Mono Class D & Stereo Audio Sub-Sys w/OCL Hp Amp & TI 3D datasheet (Rev. D) 01 Mai 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

GUI für Evaluierungsmodul (EVM)

SNAC026 — LM4947 Control Software

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Lautsprecherverstärker
LM4947 — 2,2-W-Mono-Klasse-D-Verstärker mit Analog-Eingang, 87-mW-Kopfhörerverstärker und 3D-Erweiterung
Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
DSBGA (YZR) 25 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos