Startseite Audio Audioverstärker Lautsprecherverstärker
Startseite
Audio
Audioverstärker
Lautsprecherverstärker

TAS5412-Q1

AKTIV

Class-D-Audioverstärker, 28 W, 2 Kanäle, 6- bis 24-V-Versorgungsspannung, analoger SE-Eingang mit I2

Jetzt bestellen
Datenblatt

TAS5412-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Rating Automotive Power stage supply (max) (V) 24 Power stage supply (min) (V) 6 Load (min) (Ω) 2 Output power (W) 25 THD + N at 1 kHz (%) 0.02 Iq (typ) (mA) 60 Control interface I2C Closed/open loop Closed Analog supply (min) (V) 6 Analog supply voltage (max) (V) 24 PSRR (dB) 75 Operating temperature range (°C) -40 to 105
Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Rating Automotive Power stage supply (max) (V) 24 Power stage supply (min) (V) 6 Load (min) (Ω) 2 Output power (W) 25 THD + N at 1 kHz (%) 0.02 Iq (typ) (mA) 60 Control interface I2C Closed/open loop Closed Analog supply (min) (V) 6 Analog supply voltage (max) (V) 24 PSRR (dB) 75 Operating temperature range (°C) -40 to 105
HTQFP (PHD) 64 256 mm² 16 x 16
  • TAS5412-Q1 – Single-Ended Input
  • 2-Channel Digital Power Amplifier
  • 2 Analog Inputs, 2 BTL Power Outputs
  • Typical Output Power per Channel at 10%
    • 28 Watts/Ch, Into 4 Ω at 14.4 VDC
    • 46 Watts/Ch, Into 2 Ω at 14.4 VDC
    • 79 Watts/Ch, Into 4 Ω at 24 VDC
    • 150 Watts Into 2 Ω at 24 VDC PBTL
    • 90 Watts Into 1 Ω at 14.4 VDC PBTL
  • THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
  • Patented Pop- and Click-Reduction Technology
  • Patented AM Interference Avoidance
  • Patented Cycle-by-Cycle Current Limit
  • 75-dB PSRR
  • Four-Address I2C Serial Interface for Device
    Configuration and Control
  • Channel Gains: 12 dB, 20 dB, 26 dB, 32 dB
  • Load Diagnostic Functions:
    • Output Open and Shorted Load
    • Output-to-Power and -to-Ground Shorts
    • Patented Tweeter Detection
  • Protection and Monitoring Functions:
    • Short-Circuit Protection
    • 50-V Load-Dump Protection
    • Fortuitous Open-Ground and -Power Tolerant
    • Patented Output DC Level Detection While Music Is Playing
    • Overtemperature Protection
    • Over- and Undervoltage Protection
    • Clip Detection
  • TAS5412-Q1 - 64-Pin QFP (PHD) PowerPAD Surface-Mount Package
  • Pin Compatible With 4-Channel Devices
  • Designed for Automotive EMC Requirements
  • Will Be Qualified According to AEC-Q100
  • ISO9000:2002 TS16949 Certified
  • –40 to 105°C Ambient Temperature Range
  • TAS5412-Q1 – Single-Ended Input
  • 2-Channel Digital Power Amplifier
  • 2 Analog Inputs, 2 BTL Power Outputs
  • Typical Output Power per Channel at 10%
    • 28 Watts/Ch, Into 4 Ω at 14.4 VDC
    • 46 Watts/Ch, Into 2 Ω at 14.4 VDC
    • 79 Watts/Ch, Into 4 Ω at 24 VDC
    • 150 Watts Into 2 Ω at 24 VDC PBTL
    • 90 Watts Into 1 Ω at 14.4 VDC PBTL
  • THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
  • Patented Pop- and Click-Reduction Technology
  • Patented AM Interference Avoidance
  • Patented Cycle-by-Cycle Current Limit
  • 75-dB PSRR
  • Four-Address I2C Serial Interface for Device
    Configuration and Control
  • Channel Gains: 12 dB, 20 dB, 26 dB, 32 dB
  • Load Diagnostic Functions:
    • Output Open and Shorted Load
    • Output-to-Power and -to-Ground Shorts
    • Patented Tweeter Detection
  • Protection and Monitoring Functions:
    • Short-Circuit Protection
    • 50-V Load-Dump Protection
    • Fortuitous Open-Ground and -Power Tolerant
    • Patented Output DC Level Detection While Music Is Playing
    • Overtemperature Protection
    • Over- and Undervoltage Protection
    • Clip Detection
  • TAS5412-Q1 - 64-Pin QFP (PHD) PowerPAD Surface-Mount Package
  • Pin Compatible With 4-Channel Devices
  • Designed for Automotive EMC Requirements
  • Will Be Qualified According to AEC-Q100
  • ISO9000:2002 TS16949 Certified
  • –40 to 105°C Ambient Temperature Range

The device is a two-channel digital audio amplifier designed for use in automotive head units and external amplifiers. It provides two channels at 28 W into 4 Ω at 10% THD+N from 14.4 V or 46 W into 2 Ω at 10% THD+N. The digital PWM topology provides dramatic improvements in efficiency over traditional linear amplifier solutions. This reduces the power dissipated by the amplifier by a factor of ten under typical music playback conditions. The device incorporates a patented PWM design that provides excellent power-supply rejection in the harsh electrical environment common in automotive applications. Applications attain high efficiency without the need for complicated power supply schemes. The design allows synchronization of multiple devices.

The device incorporates all the functionality needed to perform in the demanding OEM applications area, including load diagnostic functions for detecting and diagnosing misconnected outputs.

The device is a two-channel digital audio amplifier designed for use in automotive head units and external amplifiers. It provides two channels at 28 W into 4 Ω at 10% THD+N from 14.4 V or 46 W into 2 Ω at 10% THD+N. The digital PWM topology provides dramatic improvements in efficiency over traditional linear amplifier solutions. This reduces the power dissipated by the amplifier by a factor of ten under typical music playback conditions. The device incorporates a patented PWM design that provides excellent power-supply rejection in the harsh electrical environment common in automotive applications. Applications attain high efficiency without the need for complicated power supply schemes. The design allows synchronization of multiple devices.

The device incorporates all the functionality needed to perform in the demanding OEM applications area, including load diagnostic functions for detecting and diagnosing misconnected outputs.
filter Andere Lautsprecherverstärker suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 5
Typ Titel Datum
* Data sheet TAS5412-Q1 Automotive Digital Amplifier datasheet (Rev. A) 15 Okt 2013
Application note Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 26 Aug 2019
Application note AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 27 Jun 2019
EVM User's guide TAS5412-Q1 Evaluation Module User's Guide 13 Sep 2013
Application note AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 01 Mai 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TAS5412Q1PHDEVM — TAS5412Q1PHDEVM Zweikanal-Digitalverstärker für die Automobilindustrie – Evaluierungsmodul

This evaluation module enables users to test the capabilities of the TAS5412-Q1 including EMC testing to make designing easier and time to market faster. The TAS5412-Q1 two channel Class D amplifier can be designed into applications for automotive audio/infotainment, "smart glass" to electrically (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
GUI für Evaluierungsmodul (EVM)

SLOC298 — TAS5412-Q1 EVM GUI

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Lautsprecherverstärker
TAS5412-Q1 — Class-D-Audioverstärker, 28 W, 2 Kanäle, 6- bis 24-V-Versorgungsspannung, analoger SE-Eingang mit I2
Hardware-Entwicklung
Evaluierungsplatine
TAS5412Q1PHDEVM — TAS5412Q1PHDEVM Zweikanal-Digitalverstärker für die Automobilindustrie – Evaluierungsmodul
Herunterladen
Simulationsmodell

TAS5414-Q1 IBIS Model

SLOM356.ZIP (24 KB) - IBIS Model
Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTQFP (PHD) 64 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos