Inicio Aislamiento Comparadores aislados
Inicio
Aislamiento
Comparadores aislados
NUEVO

AMC21C12

ACTIVO

High-speed functionally isolated window comparator with internal reference

Haga su pedido ahora
Hoja de datos

AMC21C12

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Output type Open-drain Propagation delay time (µs) 0.28 CMTI (min) (kV/µs) 55 Rating Catalog Operating temperature range (°C) -40 to 125 Isolation rating Functional Transient isolation voltage (VIOTM) (VPK) 570 Working isolation voltage (VIOWM) (Vrms) 200 Creepage (min) (mm) 1 Clearance (min) (mm) 1
Number of channels 1 Output type Open-drain Propagation delay time (µs) 0.28 CMTI (min) (kV/µs) 55 Rating Catalog Operating temperature range (°C) -40 to 125 Isolation rating Functional Transient isolation voltage (VIOTM) (VPK) 570 Working isolation voltage (VIOWM) (Vrms) 200 Creepage (min) (mm) 1 Clearance (min) (mm) 1
VSON (DEN) 8 9.45 mm² 3.5 x 2.7
  • Wide high-side supply range: 3 V to 27 V
  • Low-side supply range: 2.7 V to 5.5 V
  • Adjustable threshold:
    • Window-comparator mode: ±20 mV to ±300 mV
    • Positive-comparator mode: 600 mV to 2.7 V
  • Reference for threshold adjustment: 100 µA, ±1%
  • Trip threshold error: ±1% (max) at 250 mV
  • Open-drain output with optional latch mode
  • Propagation delay: 280 ns (typ)
  • High CMTI: 55 V/ns (min)
  • Functional Isolation:
    • Working voltage: 200 VRMS, 280 VDC
    • Transient overvoltage (60 s): 570 VRMS, 800 VDC
  • Small, 0.65-mm pitch, leadless package with 1-mm creepage and clearance
  • Fully specified over the extended industrial temperature range: –40°C to +125°C
  • Wide high-side supply range: 3 V to 27 V
  • Low-side supply range: 2.7 V to 5.5 V
  • Adjustable threshold:
    • Window-comparator mode: ±20 mV to ±300 mV
    • Positive-comparator mode: 600 mV to 2.7 V
  • Reference for threshold adjustment: 100 µA, ±1%
  • Trip threshold error: ±1% (max) at 250 mV
  • Open-drain output with optional latch mode
  • Propagation delay: 280 ns (typ)
  • High CMTI: 55 V/ns (min)
  • Functional Isolation:
    • Working voltage: 200 VRMS, 280 VDC
    • Transient overvoltage (60 s): 570 VRMS, 800 VDC
  • Small, 0.65-mm pitch, leadless package with 1-mm creepage and clearance
  • Fully specified over the extended industrial temperature range: –40°C to +125°C

The AMC21C12 is an isolated window comparator with a short response time. The open-drain output is galvanically isolated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. The isolation barrier supports a working voltage up to 200 VRMS or 280 VDC and transient over voltages of up to 570 VRMS or 800 VDC.

The comparison window is centered at 0 V, meaning that the comparator trips if the absolute value of the input voltage exceeds the trip threshold value. The trip threshold is adjustable from 20 mV to 300 mV through a single external resistor and, therefore, the comparison window ranges from ±20 mV to ±300 mV. When the voltage on the REF pin is greater than 550 mV, the negative comparator is disabled and only the positive comparator is functional. The reference voltage in this mode can be as high as 2.7 V. This mode is particularly useful for monitoring voltage supplies.

The open-drain output on the device supports transparent mode (LATCH input tied to GND2) where the output follows the input state, or latch mode, where the output is cleared on the falling edge of the latch input signal.

The AMC21C12 is available in an 8-pin, 0.65-mm pitch VSON package and is specified over the extended industrial temperature range of –40°C to +125°C.

The AMC21C12 is an isolated window comparator with a short response time. The open-drain output is galvanically isolated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. The isolation barrier supports a working voltage up to 200 VRMS or 280 VDC and transient over voltages of up to 570 VRMS or 800 VDC.

The comparison window is centered at 0 V, meaning that the comparator trips if the absolute value of the input voltage exceeds the trip threshold value. The trip threshold is adjustable from 20 mV to 300 mV through a single external resistor and, therefore, the comparison window ranges from ±20 mV to ±300 mV. When the voltage on the REF pin is greater than 550 mV, the negative comparator is disabled and only the positive comparator is functional. The reference voltage in this mode can be as high as 2.7 V. This mode is particularly useful for monitoring voltage supplies.

The open-drain output on the device supports transparent mode (LATCH input tied to GND2) where the output follows the input state, or latch mode, where the output is cleared on the falling edge of the latch input signal.

The AMC21C12 is available in an 8-pin, 0.65-mm pitch VSON package and is specified over the extended industrial temperature range of –40°C to +125°C.
filter Buscar otro/a Comparadores aislados
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet AMC21C12 Fast Response, Functionally Isolated Window Comparator With Adjustable Threshold and Latch Function datasheet (Rev. A) PDF | HTML 07 dic 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMC23C12EVM — Módulo de evaluación AMC23C12 para comparador de ventana aislado, reforzado y de respuesta rápida

El módulo de evaluación (EVM) AMC23C12 es una plataforma para evaluar el AMC23C12, que es un comparador de ventana aislado con tiempo de respuesta corto y función de cierre. Las salidas del comparador están separadas del circuito de entrada por una barrera de aislamiento certificada para (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VSON (DEN) 8 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos