High-side FET drive, Over-temperature (OT), Overcurrent during charge (OCC), Overcurrent during discharge (OCD), Overvoltage, Short-circuit Discharge (SCD), Undervoltage

Operating current (typ) (µA)

5

Rating

Catalog

Vin (max) (V)

5.5

Overvoltage protection

4.25, 4.3, 4.44

Operating temperature range (°C)

-40 to 85

Battery overvoltage protection (min) (V)

3.75

Battery overvoltage protection (max) (V)

5.2

Function

Protection

Number of series cells (min)

1

Number of series cells (max)

1

Features

High-side FET drive, Over-temperature (OT), Overcurrent during charge (OCC), Overcurrent during discharge (OCD), Overvoltage, Short-circuit Discharge (SCD), Undervoltage

Operating current (typ) (µA)

5

Rating

Catalog

Vin (max) (V)

5.5

Overvoltage protection

4.25, 4.3, 4.44

Operating temperature range (°C)

-40 to 85

Battery overvoltage protection (min) (V)

3.75

Battery overvoltage protection (max) (V)

5.2

X2QFN (RUG)

8

2.25 mm² 1.5 x 1.5

Voltage protection:
- Overvoltage (OV): ±10mV
- Undervoltage (UV): ±20mV
Current protection:
- Overcurrent in charge (OCC): ±1mV
- Overcurrent in discharge (OCD): ±1mV
- Short circuit in discharge (SCD): ±5mV
Temperature protection:
- Overtemperature (OT)
Additional features:
- Supports as low as a 1mΩ sense resistor (RSNS)
- High-side protection
- High Vgs FET drive
- 0-V charging (only BQ2980)
- CTR pin for FET override control for system reset/shutdown
- Configure CTR for second OT protection through an external PTC thermistor
Current consumption:
- NORMAL mode: 4µA
- SHUTDOWN mode: 0.1µA maximum
Package:
- 8pin X2QFN: 1.50 × 1.50 × 0.37mm

Voltage protection:
- Overvoltage (OV): ±10mV
- Undervoltage (UV): ±20mV
Current protection:
- Overcurrent in charge (OCC): ±1mV
- Overcurrent in discharge (OCD): ±1mV
- Short circuit in discharge (SCD): ±5mV
Temperature protection:
- Overtemperature (OT)
Additional features:
- Supports as low as a 1mΩ sense resistor (RSNS)
- High-side protection
- High Vgs FET drive
- 0-V charging (only BQ2980)
- CTR pin for FET override control for system reset/shutdown
- Configure CTR for second OT protection through an external PTC thermistor
Current consumption:
- NORMAL mode: 4µA
- SHUTDOWN mode: 0.1µA maximum
Package:
- 8pin X2QFN: 1.50 × 1.50 × 0.37mm

The BQ298xyz family of devices, featuring integrated charge-pump FET drivers, provides high-side primary battery cell protection for 1-series Li-ion and Li-polymer batteries, enabling consistent Rdson across cell voltages. For better system thermal performance, the BQ298x device’s accuracy enables the use of a sense resistor as low as 1mΩ.

The CTR pin in the BQ298x device can be configured to override the FET driver by host control to create a system reset or shutdown function. Alternatively, the CTR pin can be configured to connect an external Positive Temperature Coefficient (PTC) thermistor for FET OT protection in addition to the internal die temperature sensor. The BQ2980xy devices support zero-volt (0V) charging, while the BQ2982xy devices have this disabled.

The BQ298xyz family of devices, featuring integrated charge-pump FET drivers, provides high-side primary battery cell protection for 1-series Li-ion and Li-polymer batteries, enabling consistent Rdson across cell voltages. For better system thermal performance, the BQ298x device’s accuracy enables the use of a sense resistor as low as 1mΩ.

The CTR pin in the BQ298x device can be configured to override the FET driver by host control to create a system reset or shutdown function. Alternatively, the CTR pin can be configured to connect an external Positive Temperature Coefficient (PTC) thermistor for FET OT protection in addition to the internal die temperature sensor. The BQ2980xy devices support zero-volt (0V) charging, while the BQ2982xy devices have this disabled.

filter

Buscar otro/a Protectores de baterías

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

BQ2970

ACTIVO

Protector avanzado de batería de celda única de iones de litio (Li-ion) y polímero de litio (Li-Po) Small solution size, low power

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	BQ298xyz Voltage, Current, Temperature Protectors with an Integrated High-Side NFET Driver for Fast/Flash Charging Single-Cell Li-Ion and Li-Polymer Batteries datasheet (Rev. K)	PDF \| HTML	18 jul 2024
	EVM User's guide	BQ2980EVM-883 Evaluation Module for BQ2980 High-Side Driver		11 may 2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BQ2980EVM-883 — Módulo de evaluación de protector de lado alto de una celda bq2980

The BQ2980EVM-883 evaluation module (EVM) is to evaluate the BQ2980 family of high-side protectors. The BQ2980EVM-883 demonstrates the performance of the BQ2980 family in fast charging and high current application as high as 8 A of continuous current. The BQ2980EVM-883 is ideal for evaluation in (...)

Guía del usuario: PDF

No disponible en TI.com

Encapsulado	Pines	Símbolos CAD, huellas y modelos 3D
X2QFN (RUG)	8	Ultra Librarian

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

BQ2982

Protector de lado alto para baterías de iones de litio y polímero de litio de una celda con carga de

BQ2982

Detalles del producto

Productos similares que pueden interesarle

Pin por pin con la misma funcionalidad que el dispositivo comparado

Documentación técnica

Diseño y desarrollo

BQ2980EVM-883 — Módulo de evaluación de protector de lado alto de una celda bq2980

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos