5-V Transmitter AFE Compatible With Wireless Power Consortium (WPC) v1.2 A11 Low-Power Transmitter Specification
Designed to be Used With bq500511A WPC Controller
- Note: The bq50002A is Incompatible With the bq500511 Device if Foreign Object Detection is Required
Suitable for WPC and Proprietary 5-V Wireless Power Transmitters
Supports 5 W on the Receiver Output
Integrates All the Analog Functions Required in a Wireless Power Transmitter
- MOSFET Drivers and Synchronous N-Channel Power FETs
- Accurate Current Sense
- Variable Frequency Oscillator
- High-Efficiency Voltage Regulator
- High-Sensitivity Demodulator to Decode Signals From Receiver
2-Chip Solution Enables High-Efficiency Transmitter Designs of >75% Efficiency
Ultra-Low-Standby Power, Even During Digital Ping (<30 mW)
Dynamic Power Limiting (DPL)™ Enables Operation From Input Sources With Limited Power
System LED Indication of Charging State and Fault Status
Accurate Foreign Object Detection Method (FOD)

5-V Transmitter AFE Compatible With Wireless Power Consortium (WPC) v1.2 A11 Low-Power Transmitter Specification
Designed to be Used With bq500511A WPC Controller
- Note: The bq50002A is Incompatible With the bq500511 Device if Foreign Object Detection is Required
Suitable for WPC and Proprietary 5-V Wireless Power Transmitters
Supports 5 W on the Receiver Output
Integrates All the Analog Functions Required in a Wireless Power Transmitter
- MOSFET Drivers and Synchronous N-Channel Power FETs
- Accurate Current Sense
- Variable Frequency Oscillator
- High-Efficiency Voltage Regulator
- High-Sensitivity Demodulator to Decode Signals From Receiver
2-Chip Solution Enables High-Efficiency Transmitter Designs of >75% Efficiency
Ultra-Low-Standby Power, Even During Digital Ping (<30 mW)
Dynamic Power Limiting (DPL)™ Enables Operation From Input Sources With Limited Power
System LED Indication of Charging State and Fault Status
Accurate Foreign Object Detection Method (FOD)

The bq50002A device is a highly integrated wireless power transmitter analog front end (AFE) that contains all of the analog components required to implement a Wireless Power Consortium (WPC) compliant 5-V transmitter. The bq50002A device integrates a full-bridge power driver with MOSFETs, variable-frequency oscillator, two-channel communication demodulator, linear regulator, and protection circuits. The bq50002A device must be used together with the digital controller bq500511A to realize a compact two chip wireless power transmitter solution. The bq500511A safely engages the RX device, receives packet communication from the powered device, and manages the power transfer according to WPC v1.2 specification.

The system supports foreign object detection (FOD) by continuously monitoring the amount of power transferred and comparing that to the amount of received power, as reported by the receiver. This protects against power loss to metal objects misplaced in the wireless power transfer field. To do this, the bq50002A measures the input DC current accurately by using a current sense amplifier. Should any abnormal condition develop during power transfer, the bq500511A handles it and provides indication outputs. Comprehensive status and fault monitoring features enable a low cost yet robust WPC-certified wireless power system design.

The bq50002A is available in a thermally enhanced 5.00 mm × 5.00 mm, 32-pin QFN package.

The bq50002A device is a highly integrated wireless power transmitter analog front end (AFE) that contains all of the analog components required to implement a Wireless Power Consortium (WPC) compliant 5-V transmitter. The bq50002A device integrates a full-bridge power driver with MOSFETs, variable-frequency oscillator, two-channel communication demodulator, linear regulator, and protection circuits. The bq50002A device must be used together with the digital controller bq500511A to realize a compact two chip wireless power transmitter solution. The bq500511A safely engages the RX device, receives packet communication from the powered device, and manages the power transfer according to WPC v1.2 specification.

The system supports foreign object detection (FOD) by continuously monitoring the amount of power transferred and comparing that to the amount of received power, as reported by the receiver. This protects against power loss to metal objects misplaced in the wireless power transfer field. To do this, the bq50002A measures the input DC current accurately by using a current sense amplifier. Should any abnormal condition develop during power transfer, the bq500511A handles it and provides indication outputs. Comprehensive status and fault monitoring features enable a low cost yet robust WPC-certified wireless power system design.

The bq50002A is available in a thermally enhanced 5.00 mm × 5.00 mm, 32-pin QFN package.

filter

Buscar otro/a Circuitos integrados para cargadores de baterías

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	bq50002A Low-Cost 5-V Wireless Power Transmitter Analog Front End for WPC v1.2 A11 Transmitters datasheet (Rev. A)	PDF \| HTML	30 ago 2016
	EVM User's guide	bq50002A Wireless Power TX Evaluation Module User's Guide		26 oct 2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado	Pines	Símbolos CAD, huellas y modelos 3D
VQFN (RHB)	32	Ultra Librarian

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

BQ50002A

Transmisor de potencia inalámbrico de bajo costo de 5 V AFE WPC V 1.2 A11

BQ50002A

Detalles del producto

Documentación técnica

Diseño y desarrollo

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos