Output Series Resistors to Reduce Transmission-Line Reflection NoiseThe CY74FCT2257T has four identical two-input multiplexers that select four bits of data from two sources under the control of a common data-select (S) input. The I0 inputs are selected when S is low, and the I1 inputs are selected when S is high. Data appears at the output in noninverted form for the CY74FCT2257T. On-chip termination resistors at the outputs reduce system noise caused by reflections. The CY74FCT2257T can replace the FCT257T to reduce noise in an existing design.
The CY74FCT2257T is a logic implementation of a four-pole, two-position switch, in which the position of the switch is determined by the logic levels supplied to S. Outputs are forced to the high-impedance off state when the output-enable (OE\) input is high.
All but one device must be in the high-impedance state to prevent currents from exceeding the maximum ratings if outputs are tied together. Design of the OE\ signals must ensure that there is no overlap when outputs of 3-state devices are tied together.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | Quad 2-Input Multiplexer With 3-State Outputs datasheet (Rev. B) | 19 jun 2001 | |
| Selection guide | Logic Guide (Rev. AB) | 12 jun 2017 | ||
| Application note | Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) | 02 dic 2015 | ||
| User guide | LOGIC Pocket Data Book (Rev. B) | 16 ene 2007 | ||
| Application note | Semiconductor Packing Material Electrostatic Discharge (ESD) Protection | 08 jul 2004 | ||
| Application note | Selecting the Right Level Translation Solution (Rev. A) | 22 jun 2004 | ||
| User guide | CYFCT Parameter Measurement Information | 02 abr 2001 | ||
| Selection guide | Advanced Bus Interface Logic Selection Guide | 09 ene 2001 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SSOP (DBQ) | 16 | Ultra Librarian |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.