Inicio Audio Amplificadores de audio Amplificadores para altavoces
Inicio
Audio
Amplificadores de audio
Amplificadores para altavoces

LM2876

ACTIVO

Amplificador de potencia de audio de 40 vatios y alto rendimiento con silencio

Haga su pedido ahora
Hoja de datos

LM2876

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 60 Power stage supply (min) (V) 20 Load (min) (Ω) 4 Output power (W) 40 THD + N at 1 kHz (%) 0.06 Iq (typ) (mA) 24 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 20 Analog supply voltage (max) (V) 60 PSRR (dB) 125 Operating temperature range (°C) -20 to 85
Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 60 Power stage supply (min) (V) 20 Load (min) (Ω) 4 Output power (W) 40 THD + N at 1 kHz (%) 0.06 Iq (typ) (mA) 24 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 20 Analog supply voltage (max) (V) 60 PSRR (dB) 125 Operating temperature range (°C) -20 to 85
TO-220 (NDA) 11 195.4953 mm² 20.02 x 9.765
  • 40W Continuous Average Output Power Into 8Ω
  • 75W Instantaneous Peak Output Power Capability
  • Signal-to-Noise Ratio ≥ 95 dB(min)
  • An Input Mute Function
  • Output Protection From A Short to Ground Or to the Supplies Via Internal Current Limiting Circuitry
  • Output Over-Voltage Protection Against Transients From Inductive Loads
  • Supply Under-Voltage Protection, Not Allowing Internal Biasing to Occur When |VEE| + |VCC| ≤ 12V, Thus Eliminating Turn-On and Turn-Off Transients
  • 11-Lead PFM Package
  • Wide Supply Range 20V - 72V

All trademarks are the property of their respective owners.

  • 40W Continuous Average Output Power Into 8Ω
  • 75W Instantaneous Peak Output Power Capability
  • Signal-to-Noise Ratio ≥ 95 dB(min)
  • An Input Mute Function
  • Output Protection From A Short to Ground Or to the Supplies Via Internal Current Limiting Circuitry
  • Output Over-Voltage Protection Against Transients From Inductive Loads
  • Supply Under-Voltage Protection, Not Allowing Internal Biasing to Occur When |VEE| + |VCC| ≤ 12V, Thus Eliminating Turn-On and Turn-Off Transients
  • 11-Lead PFM Package
  • Wide Supply Range 20V - 72V

All trademarks are the property of their respective owners.

The LM2876 is a high-performance audio power amplifier capable of delivering 40W of continuous average power to an 8Ω load with 0.1% THD+N from 20Hz–20kHz.

The performance of the LM2876, utilizing its Self Peak Instantaneous Temperature (°Ke) (SPiKe) protection circuitry, puts it in a class above discrete and hybrid amplifiers by providing an inherently, dynamically protected Safe Operating Area (SOA). SPiKe protection means that these parts are completely safeguarded at the output against overvoltage, undervoltage, overloads, including shorts to the supplies, thermal runaway, and instantaneous temperature peaks.

The LM2876 maintains an excellent signal-to-noise ratio of greater than 95dB (min) with a typical low noise floor of 2.0μV. It exhibits extremely low THD+N values of 0.06% at the rated output into the rated load over the audio spectrum, and provides excellent linearity with an IMD (SMPTE) typical rating of 0.004%.

The LM2876 is a high-performance audio power amplifier capable of delivering 40W of continuous average power to an 8Ω load with 0.1% THD+N from 20Hz–20kHz.

The performance of the LM2876, utilizing its Self Peak Instantaneous Temperature (°Ke) (SPiKe) protection circuitry, puts it in a class above discrete and hybrid amplifiers by providing an inherently, dynamically protected Safe Operating Area (SOA). SPiKe protection means that these parts are completely safeguarded at the output against overvoltage, undervoltage, overloads, including shorts to the supplies, thermal runaway, and instantaneous temperature peaks.

The LM2876 maintains an excellent signal-to-noise ratio of greater than 95dB (min) with a typical low noise floor of 2.0μV. It exhibits extremely low THD+N values of 0.06% at the rated output into the rated load over the audio spectrum, and provides excellent linearity with an IMD (SMPTE) typical rating of 0.004%.
filter Buscar otro/a Amplificadores para altavoces
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet LM2876 Overture Audio Pwr Amp Series High-Perf 40W Audio Pwr Amplifier w/Mute datasheet (Rev. C) 20 mar 2013
Application note AN-1192 Overture Series High Power Solutions (Rev. B) 01 may 2013
Application note AN-898 Audio Amplifiers Utilizing: SPiKe Protection (Rev. B) 01 may 2013
More literature Die D/S LM2876 MDC High-Performance 40 Watt Audio Power Amplifier W/Mute 20 sep 2012
Application note Voltage Spike Measurement Technique and Specification (Rev. A) 13 nov 2003

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

LM2876 TINA-TI Reference Design

SNAM088.TSC (101 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

LM2876 TINA-TI Spice Model

SNAM087.ZIP (21 KB) - TINA-TI Spice Model
Descargar
Modelo de simulación

LM2876 Unencrypted PSpice Model Package (Rev. A)

SNAM085A.ZIP (21 KB) - PSpice Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TO-220 (NDA) 11 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos