These data selectors/multiplexers contain inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate output control inputs are provided for each of the two 4-line sections.
The 3-state outputs can interface with and drive data lines of
bus-organized systems. With all but one of the common outputs
disabled (at a high-impedance state), the low impedance of the single
enabled output drives the bus line to a high or low logic level. Each
output has its own output-enable (
) input. The output is disabled when is high.
The SN54ALS253 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS253 and SN74AS253A are characterized for operation from 0°C to 70°C.
Select inputs A and B are common to both sections.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | Dual 1-of-4 Data Selectors/Multiplexers With 3-State Outputs datasheet (Rev. A) | 01 dic 1994 |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.