SN74CBTLV16210

Name: SN74CBTLV16210
Brand: TI
SKU: SN74CBTLV16210
Price: 1.238 USD

ACTIVO

Interruptor de bus FET de 20 canales y 3.3 V, 1:1 (SPST)

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat SN74CBTLV16210 datasheet (Rev. J) (Inglés)

SN74CBTLV16210

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Configuration

1:1 SPST

Number of channels

20

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog

Ron (typ) (Ω)

5

ON-state leakage current (max) (µA)

1

Bandwidth (MHz)

200

Operating temperature range (°C)

-40 to 85

Features

Powered-off protection

Input/output continuous current (max) (mA)

128

Rating

Catalog

Drain supply voltage (max) (V)

3.6

Supply voltage (max) (V)

3.6

Configuration

1:1 SPST

Number of channels

20

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog

Ron (typ) (Ω)

5

ON-state leakage current (max) (µA)

1

Bandwidth (MHz)

200

Operating temperature range (°C)

-40 to 85

Features

Powered-off protection

Input/output continuous current (max) (mA)

128

Rating

Catalog

Drain supply voltage (max) (V)

3.6

Supply voltage (max) (V)

3.6

SSOP (DL)

48

164.358 mm² 15.88 x 10.35

TSSOP (DGG)

48

101.25 mm² 12.5 x 8.1

TVSOP (DGV)

48

62.08 mm² 9.7 x 6.4

Member of the Texas Instruments Widebus™ Family
5- Switch Connection Between Two Ports
Rail-to-Rail Switching on Data I/O Ports
I_off Supports Parital-Power-Down Mode

Widebus is a trademark of Texas Instruments.

Member of the Texas Instruments Widebus™ Family
5- Switch Connection Between Two Ports
Rail-to-Rail Switching on Data I/O Ports
I_off Supports Parital-Power-Down Mode

Widebus is a trademark of Texas Instruments.

The SN74CBTLV16210 provides 20 bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

The device is organized as dual 10-bit bus switches with separate output-enable (OE\) inputs. It can be used as two 10-bit bus switches or as one 20-bit bus switch. When OE\ is low, the associated 10-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V _CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74CBTLV16210 provides 20 bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

The device is organized as dual 10-bit bus switches with separate output-enable (OE\) inputs. It can be used as two 10-bit bus switches or as one 20-bit bus switch. When OE\ is low, the associated 10-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V _CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

filter

Buscar otro/a Interruptores y multiplexores analógicos

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 18

	Tipo	Título		Fecha
*	Data sheet	SN74CBTLV16210 datasheet (Rev. J)		19 jul 2004
	Application note	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	02 jun 2022
	Application note	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	01 dic 2021
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	06 ene 2021
	Selection guide	Little Logic Guide 2018 (Rev. G)		06 jul 2018
	Selection guide	Logic Guide (Rev. AB)		12 jun 2017
	Application note	How to Select Little Logic (Rev. A)		26 jul 2016
	Application note	Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)		02 dic 2015
	User guide	LOGIC Pocket Data Book (Rev. B)		16 ene 2007
	More literature	Digital Bus Switch Selection Guide (Rev. A)		10 nov 2004
	Product overview	Design Summary for WCSP Little Logic (Rev. B)		04 nov 2004
	Application note	Semiconductor Packing Material Electrostatic Discharge (ESD) Protection		08 jul 2004
	User guide	Signal Switch Data Book (Rev. A)		14 nov 2003
	Application note	Bus FET Switch Solutions for Live Insertion Applications		07 feb 2003
	Application note	Texas Instruments Little Logic Application Report		01 nov 2002
	Application note	TI IBIS File Creation, Validation, and Distribution Processes		29 ago 2002
	More literature	Standard Linear & Logic for PCs, Servers & Motherboards		13 jun 2002
	User guide	CBT (5-V) And CBTLV (3.3-V) Bus Switches Data Book (Rev. B)		01 dic 1998

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.