Inicio Audio Amplificadores de audio Amplificadores para altavoces
Inicio
Audio
Amplificadores de audio
Amplificadores para altavoces

TPA2051D3

ACTIVO

Amplificador de audio mono de Clase D, entrada analógica y 2.9 W, con controlador de auriculares de

Haga su pedido ahora
Hoja de datos

TPA2051D3

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.5 Load (min) (Ω) 8 Output power (W) 2.9 SNR (dB) 97 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 6.3 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 75 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.5 Load (min) (Ω) 8 Output power (W) 2.9 SNR (dB) 97 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 6.3 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 75 Operating temperature range (°C) -40 to 85
DSBGA (YFF) 25 4.84 mm² 2.2 x 2.2
  • Mono Class-D Amp: 730 mW into 8 from 3.6 V Supply (1% THD)
  • Class-D Bypass Switches
  • DirectPath Stereo Headphone Amplifier
    • No Output Capacitors Required
  • SpeakerGuard Automatic Gain Control (AGC)
  • One Differential Mono and Two Stereo Single-Ended Inputs
  • 3:1 Input MUX with Mode Control
  • 32-Step Volume Control for Both Input Channels
  • Independent Volume Controls for All Inputs
  • Independent Shutdown for Headphone and Class-D Amplifiers
  • I2C Interface
  • Short-Circuit and Thermal-Overload Protection
  • Operates from 2.5 V to 5.5 V
  • 25-Ball 2,16 mm × 2,11 mm, 0,4 mm pitch WCSP
  • APPLICATIONS
    • Smart Phones / Cellular Phones
    • Portable Media Players
    • Portable Gaming
    • Multimedia Platforms
  • Mono Class-D Amp: 730 mW into 8 from 3.6 V Supply (1% THD)
  • Class-D Bypass Switches
  • DirectPath Stereo Headphone Amplifier
    • No Output Capacitors Required
  • SpeakerGuard Automatic Gain Control (AGC)
  • One Differential Mono and Two Stereo Single-Ended Inputs
  • 3:1 Input MUX with Mode Control
  • 32-Step Volume Control for Both Input Channels
  • Independent Volume Controls for All Inputs
  • Independent Shutdown for Headphone and Class-D Amplifiers
  • I2C Interface
  • Short-Circuit and Thermal-Overload Protection
  • Operates from 2.5 V to 5.5 V
  • 25-Ball 2,16 mm × 2,11 mm, 0,4 mm pitch WCSP
  • APPLICATIONS
    • Smart Phones / Cellular Phones
    • Portable Media Players
    • Portable Gaming
    • Multimedia Platforms

The TPA2051D3 is an audio subsystem with a mono Class-D power amplifier, a stereo DirectPath headphone amplifier, and bypass switches. The DirectPath headphone amplifier eliminates the need for external dc-blocking output capacitors. The built-in charge pump creates a negative supply voltage for the headphone amplifier, allowing a 0 V dc bias at the output. The DirectPath headphone amplifier drives 25 mW into 16 speakers from a 4.2 V supply.

The subsystem includes three inputs: A differential mono input and two stereo single-ended (SE) inputs. The stereo inputs are also configurable as differential mono inputs. Each input channel has an independent volume control. Seven operating modes provide input-to-output combinations and shutdown control. Operating mode and volume levels are controlled over a 1.8 V compatible I2C interface.

The TPA2051D3 uses SpeakerGuardTM technology to prevent output clipping distortion and excessive power to the speaker and headphones.

The Class-D amplifier includes a bypass mode. This allows the baseband IC (BB) to directly drive the 8 speaker. This is useful for dual-mode speaker phones in voice—only mode.

The Class-D amplifier uses 4.9 mA and the DirectPath amplifier uses 4.1 mA of typical quiescent current. Total supply current reduces to less than 1 µA in shutdown.

The TPA2051D3 is available in a 25-bump 2,16 mm × 2,11 mm, 0,4 mm pitch WCSP with less than 0.8 mm height.

The TPA2051D3 is an audio subsystem with a mono Class-D power amplifier, a stereo DirectPath headphone amplifier, and bypass switches. The DirectPath headphone amplifier eliminates the need for external dc-blocking output capacitors. The built-in charge pump creates a negative supply voltage for the headphone amplifier, allowing a 0 V dc bias at the output. The DirectPath headphone amplifier drives 25 mW into 16 speakers from a 4.2 V supply.

The subsystem includes three inputs: A differential mono input and two stereo single-ended (SE) inputs. The stereo inputs are also configurable as differential mono inputs. Each input channel has an independent volume control. Seven operating modes provide input-to-output combinations and shutdown control. Operating mode and volume levels are controlled over a 1.8 V compatible I2C interface.

The TPA2051D3 uses SpeakerGuardTM technology to prevent output clipping distortion and excessive power to the speaker and headphones.

The Class-D amplifier includes a bypass mode. This allows the baseband IC (BB) to directly drive the 8 speaker. This is useful for dual-mode speaker phones in voice—only mode.

The Class-D amplifier uses 4.9 mA and the DirectPath amplifier uses 4.1 mA of typical quiescent current. Total supply current reduces to less than 1 µA in shutdown.

The TPA2051D3 is available in a 25-bump 2,16 mm × 2,11 mm, 0,4 mm pitch WCSP with less than 0.8 mm height.
filter Buscar otro/a Amplificadores para altavoces
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPA2010D1 ACTIVO Amplificador de audio de Clase D, entrada analógica y 2.5 W, con ganancia variable y protección cont This product is a similar Class-D amplifier but without a headphone amplifier and with variable gain
TPA6130A2 ACTIVO Amplificador para auriculares estéreo de entrada analógica y 138 mW con interfaz de control I2C This product is a higher power (138-mW) headphone amplifier without Class-D speaker amp
TPA6132A2 ACTIVO Amplificador de auriculares estéreo de entrada analógica y 25 mW en WQFN This product is a similar headphone amplifier without Class-D speaker amp

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet 2.9 W/Channel Mono Class-D Audio Subsystem with DirectPath™ Headphone Amplifier datasheet (Rev. A) 21 oct 2009
Application note TPA2051D3 I²C Pull-Up Resistor Selection 16 oct 2011
EVM User's guide TPA2051D3EVM - User Guide 13 ene 2009

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

TPA2051D3 PSpice Transient Model (Rev. A)

SLOM191A.ZIP (36 KB) - PSpice Model
Descargar
Archivo Gerber

TPA2051D3 Design Files

SLOC336.ZIP (14671 KB)
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFF) 25 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos