홈 오디오 오디오 증폭기 스피커 증폭기
홈
오디오
오디오 증폭기
스피커 증폭기

LM49250

구형

45mW 스테레오 및 모노 이어피스 드라이버를 지원하는 2.4W, 모노, 아날로그 입력 클래스 AB 오디오 증폭기

지금 주문
데이터 시트

LM49250

구형
데이터 시트 지금 주문

제품 상세 정보

Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 4 Output power (W) 1.23 THD + N at 1 kHz (%) 0.015 Iq (typ) (mA) 5.6 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 95 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 4 Output power (W) 1.23 THD + N at 1 kHz (%) 0.015 Iq (typ) (mA) 5.6 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 95 Operating temperature range (°C) -40 to 85
DSBGA (YPG) 36 10.5625 mm² 3.25 x 3.25
  • Output Short Circuit Protection
  • Thermal Overload Protection
  • Stereo Filterless Class D Operation
  • Spread Spectrum Modulation
  • Ground Referenced Headphone Drivers
  • I2C Control Interface
  • 32-Step Input Volume Control
  • Output Volume Control
  • Minimum External Components
  • Click and Pop Suppression
  • Micro-Power Shutdown
  • Available in Space-Saving 36–Bump DSBGA Package
  • Single Supply Operation
  • RF Suppression

Key Specifications

  • Power Output at VDD = 5V Speaker:
    • RL = 4Ω, THD+N ≤ 1%: 1.97W/Ch
    • RL = 4Ω, THD+N ≤ 10%: 2.4W/Ch
    • RL =8Ω, THD+N ≤ 1%: 1.2W/Ch
  • Headphone:
    • RL = 16Ω, THD+N ≤ 1%: 41mW/Ch
    • RL = 32Ω, THD+N ≤ 1%: 45mW/Ch
  • Earpiece:
    • RL = 16Ω, THD+N ≤ 1%: 170mW
    • RL = 32Ω, THD+N ≤ 1%: 90mW
  • Shutdown Current: 0.1μA
  • Efficiency at 5V, 1W into 8Ω: 87%
  • Efficiency at 3.6V, 500mW into 8Ω: 85%

All trademarks are the property of their respective owners.

  • Output Short Circuit Protection
  • Thermal Overload Protection
  • Stereo Filterless Class D Operation
  • Spread Spectrum Modulation
  • Ground Referenced Headphone Drivers
  • I2C Control Interface
  • 32-Step Input Volume Control
  • Output Volume Control
  • Minimum External Components
  • Click and Pop Suppression
  • Micro-Power Shutdown
  • Available in Space-Saving 36–Bump DSBGA Package
  • Single Supply Operation
  • RF Suppression

Key Specifications

  • Power Output at VDD = 5V Speaker:
    • RL = 4Ω, THD+N ≤ 1%: 1.97W/Ch
    • RL = 4Ω, THD+N ≤ 10%: 2.4W/Ch
    • RL =8Ω, THD+N ≤ 1%: 1.2W/Ch
  • Headphone:
    • RL = 16Ω, THD+N ≤ 1%: 41mW/Ch
    • RL = 32Ω, THD+N ≤ 1%: 45mW/Ch
  • Earpiece:
    • RL = 16Ω, THD+N ≤ 1%: 170mW
    • RL = 32Ω, THD+N ≤ 1%: 90mW
  • Shutdown Current: 0.1μA
  • Efficiency at 5V, 1W into 8Ω: 87%
  • Efficiency at 3.6V, 500mW into 8Ω: 85%

All trademarks are the property of their respective owners.

The LM49250 is a fully integrated audio subsystem designed for stereo cell phone applications. The LM49250 combines a 2.4W/Ch stereo class D speaker amplifiers with a 45mW/Ch stereo ground referenced headphone amplifier, a class AB earpiece amplifier, TI 3D enhancement, volume control, and an input mixer into a single device. The filterless class D amplifiers deliver 1.2W/Ch into an 8Ω load with <1% THD+N from a 5V supply.

The LM49250 features a new circuit technology that utilizes a charge pump to generate a negative supply voltage. This allows the headphone outputs to be biased about ground, thereby eliminating the output-coupling capacitors.

For improved noise immunity, the LM49250 features fully differential left, right and mono inputs. The three inputs can be mixed/multiplexed to any output combination of the loudspeaker, headphone or earpiece amplifiers. The left and right differential inputs can be used as separate single-ended inputs, mixing multiple stereo audio sources. The mixer, volume control, and device mode select are controlled through an I2C compatible interface.

Output short circuit and thermal overload protection prevent the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown.

The LM49250 is a fully integrated audio subsystem designed for stereo cell phone applications. The LM49250 combines a 2.4W/Ch stereo class D speaker amplifiers with a 45mW/Ch stereo ground referenced headphone amplifier, a class AB earpiece amplifier, TI 3D enhancement, volume control, and an input mixer into a single device. The filterless class D amplifiers deliver 1.2W/Ch into an 8Ω load with <1% THD+N from a 5V supply.

The LM49250 features a new circuit technology that utilizes a charge pump to generate a negative supply voltage. This allows the headphone outputs to be biased about ground, thereby eliminating the output-coupling capacitors.

For improved noise immunity, the LM49250 features fully differential left, right and mono inputs. The three inputs can be mixed/multiplexed to any output combination of the loudspeaker, headphone or earpiece amplifiers. The left and right differential inputs can be used as separate single-ended inputs, mixing multiple stereo audio sources. The mixer, volume control, and device mode select are controlled through an I2C compatible interface.

Output short circuit and thermal overload protection prevent the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown.

filter 기타 스피커 증폭기 찾기
다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet Emission Supprssion Stereo Class D Audio w/Gnd Ref Headphone Amp & Mono Earpiece datasheet (Rev. C) 2013/05/01

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치