LM4930
- 16-bit Resolution 48kHz Stereo DAC
- 16-bit Resolution 8kHz Voice Codec
- I2S Digital Audio Data Serial Interface
- Two-wire Serial Control Interface
- PCM Voice Audio Data Serial Interface
- 25mW/channel Stereo Headphone Amplifier
- 330mW Mono 8Ω Amplifier (at AVDD = 3.0V)
- 32-step Volume Control for Audio Output Amplifiers
- No Snubber Networks or Bootstrap Capacitors are Required by the Headphone or Hands-free Amplifiers
- Digital Sidetone Generation with Adjustable Attenuation
- Gain Controllable Headphone Amp, Mono BTL Amp, Mic Preamp
- Available in the 36–bump DSBGA and 44–lead WQFN Packages
Key Specifications
- PLS OUT at AVDD = 5.0V, 8Ω 1% THD+N 1W (typ)
- PLS OUT at AVDD = 3.0V, 8Ω 1% THD+N 330mW (typ)
- PH/P OUT at AVDD = 3.0V, 32Ω 0.5% THD+N 25mW (typ)
- Supply Voltage Range
- DVDD 2.6V to 4.5V
- AVDD 2.6V to 5.5V
- Total Shutdown Current 2μA (typ)
- PSRR at 217Hz, AVDD = 3V 50dB (typ)
All trademarks are the property of their respective owners.
The LM4930 is an integrated audio subsystem that supports voice and digital audio functions. The LM4930 includes a high quality I2S input stereo DAC, a voice band codec, a stereo headphone amplifier and a high-power mono speaker amplifier. It is primarily designed for demanding applications in mobile phones and other portable devices.
The LM4930 features an I2S serial interface for full range audio, a 16-bit PCM bi-directional serial interface for the voice band codec and an two-wire interface for control. The full range music path features an SNR of 86dB with a 16-bit 48kHz input. The stereo DAC can also be used while the voice codec is in use. The headphone amplifier delivers 25mWRMS to a 32Ω single-ended stereo load with less than 0.5% distortion (THD+N) when AVDD = 3V. The mono speaker amplifier delivers up to 330mW into an 8Ω load with less than 1% distortion when AVDD = 3V.
The LM4930 employs advanced techniques to reduce power consumption, to reduce controller overhead and to eliminate click and pop. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. It is, therefore, ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM4930 Audio Subsystem w/Stereo Headphone - Mono Speaker Amps datasheet (Rev. C) | 2013/05/01 | |
| Application note | Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) | 2019/12/31 | ||
| Application note | Audio Serial Interface Configurations for Audio Codecs (Rev. A) | 2019/06/27 | ||
| Application note | Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) | 2013/10/28 | ||
| Application note | Audio Serial Interface Configurations for Audio Codecs | 2010/09/22 | ||
| Application note | Solving Enumeration Errors in USB Audio DAC and CODEC Designs | 2009/10/30 | ||
| Application note | Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port | 2009/07/08 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YZR) | 36 | Ultra Librarian |
| WQFN (NJN) | 44 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.