TAS2574
- Powerful class-D amplifier
- 8.5W 1% THD+N
- 15V boost with 5.1A max current limit
- Best in class efficiency
- Upto 90% efficiency at system level
- 4.8mW idle channel power
- Integrated Y-bridge
- Advanced 33mV step size class-H boost
- High performance audio channel
- 4.2µV A-wt. idle channel noise
- 114dB Dynamic Range
- -90dB THDN
- Low EMI performance
- Advanced integrated features
- Integrated Speaker IV sense
- Signal detection high efficiency modes
- High accuracy voltage monitor & temp sensor
- Programmable battery input current limit
- Ease of use features
- 1cell, 2cell and 3cell Li-ion battery support
- Clock based power up/down
- Auto clock rate detection: 16kHz to 192kHz
- Integrated ultrasonic tone and chirp generator
- External 14V PVDD supply support
- MCLK free operation
- Thermal and over current protection
- Programmable drive strength IO buffers
- Power Supplies and user interface
- Battery Voltage: 1.8V to 5.5V
- VDD: 1.65V to 1.95V
- IOVDD: 1.2V or 1.8V
- I2S/TDM: 8 channels
- I2C: 4 selectable addresses
- WCSP package
The TAS2574 is a digital input Class-D audio amplifier with an integrated Boost for higher power delivery in battery-operated systems. The device has integrated speaker voltage and current sense (IV-Sense) for real-time monitoring of the loudspeakers. IV-sense data can be used to run speaker protection algorithms on a host DSP to enable high output SPL while keeping speakers in a safe operating region.
The device is optimized for delivering the best battery life for real use cases of Music playback and Voice calls. Advanced efficiency optimization features like Class-H, Y-bridge and algorithms enable the device to produce best-in-class efficiency across all power regions of operation. The Class-D amplifier is capable of delivering 8.5W output power using the integrated Class-H 15V Boost.
A battery tracking peak voltage limiter and a battery voltage monitor ADC enables advanced battery monitoring algorithms on the host processor to manage peak output power delivery while avoiding any audio distortion when battery capacity is depleting.
Up to four devices can share a common bus via I2S/TDM + I2C interfaces.
추가 정보 요청
전체 데이터시트 및 추가 리소스가 제공됩니다. 지금 요청
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TAS2574 8.5W Digital Input Smart Amp with I/V Sense and Integrated 15V Class-H Boost datasheet | PDF | HTML | 2024/08/20 |
| Certificate | TAS2574EVM EU RoHS Declaration of Conformity (DoC) | 2023/04/24 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YCG) | 36 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.