제품 상세 정보

Configuration 8:1 Number of channels 1 Power supply voltage - single (V) 1.2, 1.8, 2.5, 3.3, 5 Protocols Analog Ron (typ) (Ω) 5 CON (typ) (pF) 85 ON-state leakage current (max) (µA) 0.75 Supply current (typ) (µA) 0.02 Bandwidth (MHz) 65 Operating temperature range (°C) -40 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Input/output continuous current (max) (mA) 30 Rating Automotive Drain supply voltage (max) (V) 5.5 Supply voltage (max) (V) 5.5
Configuration 8:1 Number of channels 1 Power supply voltage - single (V) 1.2, 1.8, 2.5, 3.3, 5 Protocols Analog Ron (typ) (Ω) 5 CON (typ) (pF) 85 ON-state leakage current (max) (µA) 0.75 Supply current (typ) (µA) 0.02 Bandwidth (MHz) 65 Operating temperature range (°C) -40 to 125 Features 1.8-V compatible control inputs, Break-before-make, Fail-safe logic Input/output continuous current (max) (mA) 30 Rating Automotive Drain supply voltage (max) (V) 5.5 Supply voltage (max) (V) 5.5
UQFN (RSV) 16 4.68 mm² 2.6 x 1.8
  • AEC-Q100 Qualified for Automotive Applications
    • Temperature Grade 1: –40°C to 125°C, TA
  • Low On-resistance: 5 Ω
  • Wide Supply Range: 1.08 V to 5.5 V
  • Rail to Rail Operation
  • Bidirectional Signal Path
  • 1.8 V Logic Compatible
  • Fail-Safe Logic
  • Low Supply Current: 10 nA
  • Transition Time: 14 ns
  • Break-before-make Switching
  • ESD Protection HBM: 2000 V
  • Small QFN Package
  • AEC-Q100 Qualified for Automotive Applications
    • Temperature Grade 1: –40°C to 125°C, TA
  • Low On-resistance: 5 Ω
  • Wide Supply Range: 1.08 V to 5.5 V
  • Rail to Rail Operation
  • Bidirectional Signal Path
  • 1.8 V Logic Compatible
  • Fail-Safe Logic
  • Low Supply Current: 10 nA
  • Transition Time: 14 ns
  • Break-before-make Switching
  • ESD Protection HBM: 2000 V
  • Small QFN Package

The TMUX1208-Q1 is a general purpose complementary metal-oxide semiconductor (CMOS) multiplexer (MUX). The TMUX1208-Q1 is an 8:1 mux configuration allowing 8 different signal paths to be switched to a common output pin . Wide operating supply of 1.08 V to 5.5 V allows for use in automotive applications with varying power supply requirements. The device supports bidirectional analog and digital signals on the source (Sx) and drain (D) pins ranging from GND to VDD.

The TMUX1208-Q1 comes in a small QFN package to enable reduced system size requirements. The device has low on-resistance of 5Ω typical to minimize the impact of distortion and signal integrity issues when the device is not connected to a high impedance signal path.

All logic inputs have 1.8 V logic compatible thresholds, ensuring both TTL and CMOS logic compatibility when operating in the valid supply voltage range. Fail-Safe Logic circuitry allows voltages on the control pins to be applied before the supply pin, protecting the device from potential damage.

The TMUX1208-Q1 is a general purpose complementary metal-oxide semiconductor (CMOS) multiplexer (MUX). The TMUX1208-Q1 is an 8:1 mux configuration allowing 8 different signal paths to be switched to a common output pin . Wide operating supply of 1.08 V to 5.5 V allows for use in automotive applications with varying power supply requirements. The device supports bidirectional analog and digital signals on the source (Sx) and drain (D) pins ranging from GND to VDD.

The TMUX1208-Q1 comes in a small QFN package to enable reduced system size requirements. The device has low on-resistance of 5Ω typical to minimize the impact of distortion and signal integrity issues when the device is not connected to a high impedance signal path.

All logic inputs have 1.8 V logic compatible thresholds, ensuring both TTL and CMOS logic compatibility when operating in the valid supply voltage range. Fail-Safe Logic circuitry allows voltages on the control pins to be applied before the supply pin, protecting the device from potential damage.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TMUX4051-Q1 활성 1.8V 호환 로직을 지원하는 오토모티브, ±12-V, 8:1 1채널, 멀티플렉서 ±24-V mux 

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 날짜
* Data sheet TMUX1208-Q1 5-V Bidirectional 8:1 Multiplexer with 1.8-V Logic datasheet (Rev. A) 2020/07/24
Functional safety information TMUX1208-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2024/09/26

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

인터페이스 어댑터

LEADLESS-ADAPTER1 — TI의 6, 8, 10, 12, 14, 16 및 20핀 리드 없는 패키지의 테스트를 위한 DIP 헤더 어댑터에 대한 표면 실장

The EVM-LEADLESS1 board allows for quick testing and bread boarding of TI's common leadless packages.  The board has footprints to convert TI's DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW RTE, RTJ, RUK , RUC, RUG, RUM,RUT and YZP surface mount packages to 100mil DIP headers.
사용 설명서: PDF
시뮬레이션 모델

TMUX1208 PSpice Model

SCDM214.ZIP (98 KB) - PSpice Model
시뮬레이션 모델

TMUX1208QRSVRQ1 IBIS Model

SCDM239.ZIP (8 KB) - IBIS Model
레퍼런스 디자인

PMP22650 — GaN 기반, 6.6kW, 양방향, 온보드 충전기 레퍼런스 디자인

PMP22650 레퍼런스 설계는 6.6kW 양방향 온보드 충전기입니다. 이 설계에서는 2상 토템 폴 PFC와 동기 정류를 지원하는 풀 브리지 CLLLC 컨버터를 사용합니다. CLLLC은 주파수 및 위상 변조를 모두 활용하여 필요한 조정 범위 전반에 걸쳐 출력을 조정합니다. 이 설계에서는 TMS320F28388D 마이크로컨트롤러 내부의 단일 프로세싱 코어를 사용하여 PFC 및 CLLLC를 모두 제어합니다. 동기 정류는 로고우스키(Rogowski) 코일 전류 센서가 탑재된 동일한 마이크로컨트롤러를 통해 구현됩니다. 고속 GaN (...)
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
UQFN (RSV) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상