AFE5401-EP
- Integrated Analog Front-End Includes:
- Quad LNA, Equalizer, PGA, Antialiasing Filter, and ADC
- Input-Referred Noise with 30dB PGA Gain:
- 2.9nV/√ Hz for 15dB LNA Gain
- 2.0nV/√ Hz for 18dB LNA Gain with HIGH_POW_LNA Mode
- Simultaneous Sampling Across Channels
- Programmable LNA Gain: 12dB, 15dB, 16.5dB, and 18dB
- Programmable Equalizer Modes
- Built-In Diagnostic Modes
- Temperature Sensor
- Programmable-Gain Amplifiers (PGAs):
- 0dB to 30dB in 3dB Steps
- Programmable, Third-Order, Antialiasing Filter:
- 7MHz, 8MHz, 10.5MHz, and 12MHz
- Analog-to-Digital Converter (ADC):
- Quad Channel, 12 Bits, 25MSPS per Channel
- No External Decoupling Required for References
- Parallel CMOS Outputs
- 64-mW Total Core Power per Channel at 25MSPS per Channel
- Supplies: 1.8V and 3.3V
- Package: 9mm × 9mm VQFN-64
- Device Temperature: –40°C to 125°C Ambient Operating Temperature Range
- Supports defense, aerospace, and medical applications
- Controlled baseline
- One assembly and test site
- One fabrication site
- Extended product life cycle
- Product traceability
- VID V62/25601
The AFE5401-EP is an analog front-end (AFE), targeting applications where the level of integration is critical. The device includes four channels, with each channel comprising a low-noise amplifier (LNA), a programmable equalizer (EQ), a programmable gain amplifier (PGA), and an antialias filter followed by a high-speed, 12-bit, analog-to-digital converter (ADC) at 25MSPS per channel.
Each of the four differential input pairs are amplified by an LNA and are followed by a PGA with a programmable gain range from 0dB to 30dB. An antialias, low-pass filter (LPF) is also integrated between the PGA and ADC for each channel.
Each LNA, PGA, and antialiasing filter output is differential (limited to 2VPP). The antialiasing filter drives the on-chip, 12-bit, 25MSPS ADC. The four ADC outputs are multiplexed on a 12-bit, parallel, CMOS output bus.
The device is available in a 9mm × 9mm, VQFN-64 package and is specified over a temperature range of –40°C to +125°C. For more information, contact AFE5401_info@list.ti.com.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AFE5401-Q1EVM — AFE5401 評估模組
AFE5401 評估模組 (EVM) 提供評估 AFE5401 整合式訊號鏈四通道類比前端 (AFE) 的平台,適用於各種訊號、時脈、參考與 ADC 輸出格式。
請注意,AFE5401-Q1EVM 評估需要 TSW1400EVM (停產)。建議您不要購買 AFE5401-Q1EVM,除非您已擁有 TSW1400EVM。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
VQFN (RGC) | 64 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點