首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC

BQ2031

現行

具有用戶可選充電演算法的切換模式鉛酸電池充電器

立即訂購
產品規格表

BQ2031

現行
產品規格表 立即訂購

產品詳細資料

Number of series cells 6 Charge current (max) (A) 2 Vin (max) (V) 5.5 Cell chemistry Lead Acid Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 20 Absolute max Vin (max) (V) 7 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 4.5 Rating Catalog Operating temperature range (°C) -20 to 70
Number of series cells 6 Charge current (max) (A) 2 Vin (max) (V) 5.5 Cell chemistry Lead Acid Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 20 Absolute max Vin (max) (V) 7 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 4.5 Rating Catalog Operating temperature range (°C) -20 to 70
PDIP (N) 16 181.42 mm² 19.3 x 9.4 SOIC (D) 16 59.4 mm² 9.9 x 6
  • Conforms to battery manufacturers' charge recommendations for cyclic and float charge
  • Pin-selectable charge algorithms

    • - Two-Step Voltage with temperature-compensated constant-voltage maintenance
    - Two-Step Current with constant-rate pulsed current maintenance
    - Pulsed Current: hysteretic, on-demand pulsed current
  • Pin-selectable charge termination by maximum voltage, 2V, minimum current, and maximum time
  • Pre-charge qualification detects shorted, opened, or damaged cells and conditions battery
  • Charging continuously qualified by temperature and voltage limits
  • Internal temperature-compensated voltage reference
  • Pulse-width modulation control

    • - Ideal for high-efficiency switch-mode power conversion
    - Configurable for linear or gated current use
  • Direct LED control outputs display charge status and fault conditions
  • Conforms to battery manufacturers' charge recommendations for cyclic and float charge
  • Pin-selectable charge algorithms

    • - Two-Step Voltage with temperature-compensated constant-voltage maintenance
    - Two-Step Current with constant-rate pulsed current maintenance
    - Pulsed Current: hysteretic, on-demand pulsed current
  • Pin-selectable charge termination by maximum voltage, 2V, minimum current, and maximum time
  • Pre-charge qualification detects shorted, opened, or damaged cells and conditions battery
  • Charging continuously qualified by temperature and voltage limits
  • Internal temperature-compensated voltage reference
  • Pulse-width modulation control

    • - Ideal for high-efficiency switch-mode power conversion
    - Configurable for linear or gated current use
  • Direct LED control outputs display charge status and fault conditions

The bq2031 Lead-Acid Fast Charge IC is designed to optimize charging of lead-acid chemistry batteries. A flexible pulse-width modulation regulator allows the bq2031 to control constant-voltage, constant-current, or pulsed-current charging. The regulator frequency is set by an external capacitor for design flexibility. The switch-mode design keeps power dissipation to a minimum for high charge current applications.

A charge cycle begins when power is applied or the battery is replaced. For safety, charging is inhibited until the battery voltage is within configured limits. If the battery voltage is less than the low-voltage threshold, the bq2031 provides trickle-currentcharging until the voltage rises into the allowed range or an internal timer runs out and places the bq2031 in a Fault condition. This procedure prevents high-current charging of cells that are possibly damaged or reversed. Charging is inhibited anytime the temperature of the battery is outside the configurable, allowed range. All voltage thresholds are temperature-compensated.

The bq2031 terminates fast (bulk) charging based on the following:

  • Maximum voltage
  • Second difference of cell voltage (2V)
  • Minimum current (in constant-voltage charging)
  • Maximum time-out (MTO)
    • After bulk charging, the bq2031 provides temperature-compensated maintenance (float) charging to maintain battery capacity.

    The bq2031 Lead-Acid Fast Charge IC is designed to optimize charging of lead-acid chemistry batteries. A flexible pulse-width modulation regulator allows the bq2031 to control constant-voltage, constant-current, or pulsed-current charging. The regulator frequency is set by an external capacitor for design flexibility. The switch-mode design keeps power dissipation to a minimum for high charge current applications.

    A charge cycle begins when power is applied or the battery is replaced. For safety, charging is inhibited until the battery voltage is within configured limits. If the battery voltage is less than the low-voltage threshold, the bq2031 provides trickle-currentcharging until the voltage rises into the allowed range or an internal timer runs out and places the bq2031 in a Fault condition. This procedure prevents high-current charging of cells that are possibly damaged or reversed. Charging is inhibited anytime the temperature of the battery is outside the configurable, allowed range. All voltage thresholds are temperature-compensated.

    The bq2031 terminates fast (bulk) charging based on the following:

  • Maximum voltage
  • Second difference of cell voltage (2V)
  • Minimum current (in constant-voltage charging)
  • Maximum time-out (MTO)
    • After bulk charging, the bq2031 provides temperature-compensated maintenance (float) charging to maintain battery capacity.
    filter 尋找其它 電池充電器 IC
    下載 觀看有字幕稿的影片 影片

    技術文件

    star =TI 所選的此產品重要文件
    找不到結果。請清除您的搜尋條件，然後再試一次。
    檢視所有 6
    類型 標題 日期
    * Data sheet Lead-Acid Fast-Charge IC datasheet 1999年 9月 5日
    Application note Simple MPPT based Lead acid charger using BQ2031 (Rev. A) 2017年 8月 8日
    Analog Design Journal 4Q 2011 Issue Analog Applications Journal 2011年 11月 9日
    Analog Design Journal Solar charging solution provides narrow-voltage DC/DC system bus for multicell 2011年 11月 9日
    User guide DV2031S2 Lead-Acid Charger Development System Control of On-Board p-FET (Rev. B) 2007年 3月 16日
    Application note U-510 Using the bq2031 to Charge Lead-Acid Batteries 1999年 9月 5日

    設計與開發

    如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

    開發模組 (EVM) 的 GUI

    SLVC024 — bq24715 EVM GUI Package

    支援產品和硬體

    支援產品和硬體

    產品
    電池充電器 IC
    BQ2000 — 具有峰值電壓偵測終端器的切換式多化合物電池充電器 BQ2000T — 具有 dT/dt 終端的切換模式多化合物電池充電器 BQ2002 — 具有負 dV、PVT 和加滿時間設置 1 的鎳鎘/鎳氫電池充電控制器 BQ2002C — 具有負 dV、PVT 的鎳鎘/鎳氫電池充電控制器 BQ2002D — 具有 dT/dt 終端的切換模式鎳鎘/鎳氫電池控制器 BQ2002E — 具有負 dV、PVT 和 tMTO setup1 的鎳鎘/鎳氫電池充電控制器 BQ2002F — 具有負 dV、PVT 和加滿時間設置 2 的鎳鎘/鎳氫電池充電控制器 BQ2002G — 具有負 dV、PVT 和 tMTO 設定 2 的鎳鎘/鎳氫電池充電控制器 BQ2002T — 具有 dT/dt 終端和低溫故障的鎳鎘/鎳氫電池充電控制器 BQ2031 — 具有用戶可選充電演算法的切換模式鉛酸電池充電器 BQ2057C — 具有 AutoCompTM 4.2V 的低壓差線性 1 芯鋰離子電池充電控制器 BQ24010 — 採用 QFN-11 封裝，具有交流電和溫度感測的 1 芯、1A 線性鋰離子電池充電器 BQ24012 — 採用 QFN-12，具有 FET、交流電出現和充電賦能的 1 芯 1-A 線性鋰離子電池充電器 BQ24013 — 採用 QFN-11 封裝，具有充電賦能、充電終止賦能的 1 芯 1-A 線性鋰離子電池充電器 BQ24200 — 採用 MSOP-8 封裝且具溫度感測功能的 500-mA、4.2-V 鋰離子充電器，適用於電流限制應用 BQ24201 — 採用 MSOP-8 封裝且具溫度感測功能的 500-mA、4.1-V 鋰離子充電器，適用於電流限制應用 BQ24202 — 採用 MSOP-8 封裝、顯示充電狀態、適用於電流限制應用的 500-mA、4.2-V 鋰離子充電器 BQ24203 — 採用 MSOP-8 封裝、顯示充電狀態、適用於電流限制應用的 500-mA、4.1-V 鋰離子充電器 BQ24205 — 採用 MSOP-8 封裝、適用於電流限制應用的 500-mA、4.1-V 鋰離子充電器 BQ24715 — 具 N 通道功率 MOSFET 選擇器的 SMBus 2-3 芯 NVDC 降壓電池充電器控制器
    下載
    封裝 針腳 CAD 符號、佔位空間與 3D 模型
    PDIP (N) 16 Ultra Librarian
    SOIC (D) 16 Ultra Librarian
    適用 TI 的評估品項標準條款與條件。

    訂購與品質

    內含資訊：
    • RoHS
    • REACH
    • 產品標記
    • 鉛塗層/球物料
    • MSL 等級/回焊峰值
    • MTBF/FIT 估算值
    • 材料內容
    • 認證摘要
    • 進行中持續性的可靠性監測
    內含資訊：
    • 晶圓廠位置
    • 組裝地點

    支援與培訓

    內含 TI 工程師技術支援的 TI E2E™ 論壇

    以英文檢視所有論壇主題

    內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

    若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

    影片