產品詳細資料

Number of series cells 2, 3 Charge current (max) (A) 8 Vin (max) (V) 24 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 4.096 Battery charge voltage (max) (V) 14.5 Absolute max Vin (max) (V) 28 Control topology Switch-Mode Buck Control interface SMBus Features IINDPM (Input current limit), Input OVP Vin (min) (V) 6 Rating Catalog Operating temperature range (°C) -20 to 125
Number of series cells 2, 3 Charge current (max) (A) 8 Vin (max) (V) 24 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 4.096 Battery charge voltage (max) (V) 14.5 Absolute max Vin (max) (V) 28 Control topology Switch-Mode Buck Control interface SMBus Features IINDPM (Input current limit), Input OVP Vin (min) (V) 6 Rating Catalog Operating temperature range (°C) -20 to 125
VQFN (RGR) 20 12.25 mm² 3.5 x 3.5
  • 6-24V Input SMBus NVDC-1 2-3S Battery Charger Controller
  • System Instant-on Operation with No Battery or Deeply Discharged Battery
  • Ultra-Fast Transient Response of 100 µs
  • Ultra-Low Quiescent Current of 500 µA and High PFM Light Load Efficiency 80% at 20mA load to Meet Energy Star and ErP Lot6
  • Switching Frequency: 600kHz/800kHz/1MHz
  • Programmable System/Charge Voltage (16 mV/step), Input/Charge Current (64 mA/step) with High Accuracy
    • ±0.5% Charge Voltage Regulation
    • ±3% Input/Charge Current Regulation
    • ±2% 40x Input/16x Discharge Current Monitor Output
  • Support Battery LEARN Function
  • Maximize CPU Performance with Deeply Discharged Battery or No Battery
  • Integrated NMOS ACFET and RBFET Driver
  • 20-pin 3.5 × 3.5 mm2 QFN Package
  • 6-24V Input SMBus NVDC-1 2-3S Battery Charger Controller
  • System Instant-on Operation with No Battery or Deeply Discharged Battery
  • Ultra-Fast Transient Response of 100 µs
  • Ultra-Low Quiescent Current of 500 µA and High PFM Light Load Efficiency 80% at 20mA load to Meet Energy Star and ErP Lot6
  • Switching Frequency: 600kHz/800kHz/1MHz
  • Programmable System/Charge Voltage (16 mV/step), Input/Charge Current (64 mA/step) with High Accuracy
    • ±0.5% Charge Voltage Regulation
    • ±3% Input/Charge Current Regulation
    • ±2% 40x Input/16x Discharge Current Monitor Output
  • Support Battery LEARN Function
  • Maximize CPU Performance with Deeply Discharged Battery or No Battery
  • Integrated NMOS ACFET and RBFET Driver
  • 20-pin 3.5 × 3.5 mm2 QFN Package

The bq24715 is a NVDC-1 synchronous battery charge controller with low quiescent current, high light load efficiency for 2S or 3S Li-ion battery charging applications, offering low component count.

The power path management allows the system to be regulated at battery voltage but does not drop below the programmable system minimum voltage.

The bq24715 provides N-channel ACFET and RBFET drivers for the power path management. It also provides driver of the external P-channel battery FET. The loop compensation is fully integrated.

The bq24715 has programmable 11-bit charge voltage, 7-bit input/charge current and 6-bit minimal system voltage with very high regulation accuracies through the SMBus communication interface.

The v monitors adapter current or battery discharge current through the IOUT pin allowing the host to throttle down CPU speed when needed.

The bq24715 provides extensive safety features for over current, over voltage and MOSFET short circuit.

The bq24715 is a NVDC-1 synchronous battery charge controller with low quiescent current, high light load efficiency for 2S or 3S Li-ion battery charging applications, offering low component count.

The power path management allows the system to be regulated at battery voltage but does not drop below the programmable system minimum voltage.

The bq24715 provides N-channel ACFET and RBFET drivers for the power path management. It also provides driver of the external P-channel battery FET. The loop compensation is fully integrated.

The bq24715 has programmable 11-bit charge voltage, 7-bit input/charge current and 6-bit minimal system voltage with very high regulation accuracies through the SMBus communication interface.

The v monitors adapter current or battery discharge current through the IOUT pin allowing the host to throttle down CPU speed when needed.

The bq24715 provides extensive safety features for over current, over voltage and MOSFET short circuit.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet bq24715 2-3 Cell NVDC-1 Battery Charger Controller with Ultra-Fast Transient Response and High Light-Load Efficiency datasheet (Rev. B) PDF | HTML 2016年 9月 20日
Analog Design Journal 4Q 2015 Analog Applications Journal 2015年 10月 30日
Analog Design Journal Faster, cooler charging with dual chargers 2015年 10月 30日
EVM User's guide bq24715EVM-115 User's Guide 2012年 12月 13日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ24715EVM-115 — BQ24715EVM-115 評估模組

SMBus Controlled NVDC-1 Charge Controller with N-CH MOSFET Selector and Current Monitoring; 2-3 Cells
使用指南: PDF
TI.com 無法提供
開發模組 (EVM) 的 GUI

SLVC024 bq24715 EVM GUI Package

支援產品和硬體

支援產品和硬體

產品
電池充電器 IC
BQ2000 具有峰值電壓偵測終端器的切換式多化合物電池充電器 BQ2000T 具有 dT/dt 終端的切換模式多化合物電池充電器 BQ2002 具有負 dV、PVT 和加滿時間設置 1 的鎳鎘/鎳氫電池充電控制器 BQ2002C 具有負 dV、PVT 的鎳鎘/鎳氫電池充電控制器 BQ2002D 具有 dT/dt 終端的切換模式鎳鎘/鎳氫電池控制器 BQ2002E 具有負 dV、PVT 和 tMTO setup1 的鎳鎘/鎳氫電池充電控制器 BQ2002F 具有負 dV、PVT 和加滿時間設置 2 的鎳鎘/鎳氫電池充電控制器 BQ2002G 具有負 dV、PVT 和 tMTO 設定 2 的鎳鎘/鎳氫電池充電控制器 BQ2002T 具有 dT/dt 終端和低溫故障的鎳鎘/鎳氫電池充電控制器 BQ2031 具有用戶可選充電演算法的切換模式鉛酸電池充電器 BQ2057C 具有 AutoCompTM 4.2V 的低壓差線性 1 芯鋰離子電池充電控制器 BQ24010 採用 QFN-11 封裝,具有交流電和溫度感測的 1 芯、1A 線性鋰離子電池充電器 BQ24012 採用 QFN-12,具有 FET、交流電出現和充電賦能的 1 芯 1-A 線性鋰離子電池充電器 BQ24013 採用 QFN-11 封裝,具有充電賦能、充電終止賦能的 1 芯 1-A 線性鋰離子電池充電器 BQ24200 採用 MSOP-8 封裝且具溫度感測功能的 500-mA、4.2-V 鋰離子充電器,適用於電流限制應用 BQ24201 採用 MSOP-8 封裝且具溫度感測功能的 500-mA、4.1-V 鋰離子充電器,適用於電流限制應用 BQ24202 採用 MSOP-8 封裝、顯示充電狀態、適用於電流限制應用的 500-mA、4.2-V 鋰離子充電器 BQ24203 採用 MSOP-8 封裝、顯示充電狀態、適用於電流限制應用的 500-mA、4.1-V 鋰離子充電器 BQ24205 採用 MSOP-8 封裝、適用於電流限制應用的 500-mA、4.1-V 鋰離子充電器 BQ24715 具 N 通道功率 MOSFET 選擇器的 SMBus 2-3 芯 NVDC 降壓電池充電器控制器
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGR) 20 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片