首頁 馬達驅動器 致動器驅動器 觸控馬達驅動器
首頁
馬達驅動器
致動器驅動器
觸控馬達驅動器

DRV2605L-Q1

現行

具有 2-V 操作電壓、波形庫和自動共振追蹤功能且適用於 ERM/LRA 的汽車觸控驅動器

立即訂購
產品規格表

DRV2605L-Q1

現行
產品規格表 立即訂購

產品詳細資料

Haptic actuator type ERM, LRA Features Integrated haptic effects, Smart loop Input signal Analog, I2C, PWM Vs (min) (V) 2 Vs (max) (V) 5.2 Vout (max) (V) 5.5 Peak-to-peak output voltage (max) (V) 10.4 Iq (typ) (mA) 0.5 Shutdown current (ISD) (µA) 4 Startup time (ms) 0.7 Operating temperature range (°C) -40 to 105 Rating Automotive
Haptic actuator type ERM, LRA Features Integrated haptic effects, Smart loop Input signal Analog, I2C, PWM Vs (min) (V) 2 Vs (max) (V) 5.2 Vout (max) (V) 5.5 Peak-to-peak output voltage (max) (V) 10.4 Iq (typ) (mA) 0.5 Shutdown current (ISD) (µA) 4 Startup time (ms) 0.7 Operating temperature range (°C) -40 to 105 Rating Automotive
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 2: –40°C to 105°C
    • Device HBM ESD Classification Level 1B
    • Device CDM ESD Classification Level C6
  • Flexible Haptic and Vibration Driver
    • LRA (Linear Resonance Actuator)
    • ERM (Eccentric Rotating Mass)
  • I2C-Controlled Digital Playback Engine
    • Waveform Sequencer and Trigger
    • Real-Time Playback Mode through I2C
    • I2C Dual-Mode Drive (Open and Closed Loop)
  • Smart-Loop Architecture (Patent Pending Control Algorithm)
    • Automatic Overdrive and Braking
    • Automatic Resonance Tracking and Reporting (LRA Only)
    • Automatic Actuator Diagnostic
    • Automatic Level Calibration
    • Wide Support for Actuator Models
  • Licensed Immersion TouchSense® 2200 Features:
    • Integrated Immersion Effect Library
    • Audio-to-Vibe
  • Drive Compensation Over Battery Discharge
  • Wide Voltage Operation (2 V to 5.2 V)
  • Efficient Differential Switching Output Drive
  • PWM Input with 0% to 100% Duty-Cycle Control Range
  • Hardware Trigger Input
  • Fast Startup Time
  • 1.8-V Compatible, VDD-Tolerant Digital Interface
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 2: –40°C to 105°C
    • Device HBM ESD Classification Level 1B
    • Device CDM ESD Classification Level C6
  • Flexible Haptic and Vibration Driver
    • LRA (Linear Resonance Actuator)
    • ERM (Eccentric Rotating Mass)
  • I2C-Controlled Digital Playback Engine
    • Waveform Sequencer and Trigger
    • Real-Time Playback Mode through I2C
    • I2C Dual-Mode Drive (Open and Closed Loop)
  • Smart-Loop Architecture (Patent Pending Control Algorithm)
    • Automatic Overdrive and Braking
    • Automatic Resonance Tracking and Reporting (LRA Only)
    • Automatic Actuator Diagnostic
    • Automatic Level Calibration
    • Wide Support for Actuator Models
  • Licensed Immersion TouchSense® 2200 Features:
    • Integrated Immersion Effect Library
    • Audio-to-Vibe
  • Drive Compensation Over Battery Discharge
  • Wide Voltage Operation (2 V to 5.2 V)
  • Efficient Differential Switching Output Drive
  • PWM Input with 0% to 100% Duty-Cycle Control Range
  • Hardware Trigger Input
  • Fast Startup Time
  • 1.8-V Compatible, VDD-Tolerant Digital Interface

The DRV2605L-Q1 device is an automotive haptic driver that includes a haptic-effect library and provides a closed-loop actuator-control system for high-quality tactile feedback for ERM and LRA. This schema helps improve actuator performance in terms of acceleration consistency, start time, and brake time and is accessible through a shared I2C compatible bus or PWM input signal.

The DRV2605L-Q1 device offers a licensed version of TouchSense 2200 software from Immersion which eliminates the requirement to design haptic waveforms because the software includes over 100 licensed effects (6 ERM libraries and 1 LRA library) and audio-to-vibe features.

Additionally, the real-time playback mode allows the host processor to bypass the library playback engine and play waveforms directly from the host through I2C.

The smart-loop architecture inside the DRV2605L-Q1 device allows simple auto-resonant drive for the LRA as well as feedback-optimized ERM drive allowing for automatic overdrive and braking. The smart-loop architecture creates a simplified input waveform interface as well as reliable motor control and consistent motor performance. The DRV2605L-Q1 also allows for open-loop driving through the use of internally-generated PWM. Additionally, the audio-to-vibe mode automatically converts an audio input signal to meaningful tactile effects.

For an important notice regarding Immersion software, see the Legal Notice section.

The DRV2605L-Q1 device is an automotive haptic driver that includes a haptic-effect library and provides a closed-loop actuator-control system for high-quality tactile feedback for ERM and LRA. This schema helps improve actuator performance in terms of acceleration consistency, start time, and brake time and is accessible through a shared I2C compatible bus or PWM input signal.

The DRV2605L-Q1 device offers a licensed version of TouchSense 2200 software from Immersion which eliminates the requirement to design haptic waveforms because the software includes over 100 licensed effects (6 ERM libraries and 1 LRA library) and audio-to-vibe features.

Additionally, the real-time playback mode allows the host processor to bypass the library playback engine and play waveforms directly from the host through I2C.

The smart-loop architecture inside the DRV2605L-Q1 device allows simple auto-resonant drive for the LRA as well as feedback-optimized ERM drive allowing for automatic overdrive and braking. The smart-loop architecture creates a simplified input waveform interface as well as reliable motor control and consistent motor performance. The DRV2605L-Q1 also allows for open-loop driving through the use of internally-generated PWM. Additionally, the audio-to-vibe mode automatically converts an audio input signal to meaningful tactile effects.

For an important notice regarding Immersion software, see the Legal Notice section.
filter 尋找其它 觸控馬達驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
DRV2605L 現行 具有 2 V 操作電壓、波形庫和自動共振追蹤功能且適用於 ERM/LRA 的觸控驅動器 Catalog version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet DRV2605L-Q1 Automotive Haptic Driver for LRA and ERM With Effect Library and Sma datasheet (Rev. B) 2018年 4月 23日
Application note Benefits of Auto-Resonance Tracking (Rev. A) PDF | HTML 2021年 11月 11日
Application note Haptic Energy Consumption (Rev. A) PDF | HTML 2021年 9月 28日
Application note Piezo Haptics With Integrated Waveforms: DRV2605L-Q1 and DRV2700 2017年 9月 27日
Technical article Four tech trends that improve the driver experience PDF | HTML 2017年 1月 6日
User guide DRV2605L Multi-Driver ERM, LRA Haptics Evaluation Kit 2014年 11月 17日
Application note LRA Actuators: How to Move Them? 2014年 11月 3日
User guide DRV2605LDGS Haptic Driver Mini Board 2014年 8月 13日
User guide DRV2605L ERM and LRA Haptic Driver Evaluation Kit (Rev. A) 2014年 6月 10日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV2605LDGSEVM-M — 具有觸控智慧迴路演算法和 TouchSense 2200™ 效果資料庫的 DRV2605L 斷路板

The DRV2605LDGSEVM-M is a 16.33x8.97mm breakout board for the DRV2605L Haptic Driver in MSOP package. It contains the DRV2605L with Smart Loop Algorithm, embedded TouchSense 2200(TM) effects library licensed from Immersion, and adds extended actuator support for Eccentric Rotating Mass (ERM) and (...)

使用指南: PDF
TI.com 無法提供
開發板

DRV2605LEVM-CT — DRV2605L ERM 和 LRA 觸覺回饋評估套件

The DRV2605LEVM-CT is a complete reference design for the DRV2605L ERM and LRA haptics driver.  It contains the DRV2605L with Smart Loop Algorithm, embedded TouchSense 2200 effects library licensed from Immersion, and adds extended actuator support for ERMs and LRAs.  The board includes (...)

使用指南: PDF
TI.com 無法提供
參考設計

TIDA-00314 — 具有整合式觸覺回饋的金屬按鈕觸碰感測參考設計

This reference design uses our inductance-to-digital converter technology to provide a high-precision method to sense button presses on a metal surface and our haptic drivers provide high-quality haptics feedback to the user. TIDA-00314 demonstrates techniques for system design, environmental (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片