產品詳細資料

Number of full bridges Half Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Peak output current (A) 46 RDS(ON) (HS + LS) (mΩ) 16 Sleep current (µA) 5 Control mode PH/EN, PWM Control interface Hardware (GPIO), SPI Features Current Regulation, Current sense Amplifier, Integrated Current Sensing, Open-Load Detection Rating Automotive Operating temperature range (°C) -40 to 125
Number of full bridges Half Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Peak output current (A) 46 RDS(ON) (HS + LS) (mΩ) 16 Sleep current (µA) 5 Control mode PH/EN, PWM Control interface Hardware (GPIO), SPI Features Current Regulation, Current sense Amplifier, Integrated Current Sensing, Open-Load Detection Rating Automotive Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4 VQFN-HR (RXZ) 16 19.25 mm² 3.5 x 5.5
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • 4.5-V to 35-V (40-V abs. max) operating range
  • SPI(S) or HW(H) variant in VQFN-HR package: RON_LS + RON_HS: 16mΩ
  • SPI(P) variant in HTSSOP package: RON_LS + RON_HS: 19mΩ
  • IOUT Max = 46A
  • PWM frequency operation up to 125KHz with automatic dead time assertion
  • Configurable slew rate and spread spectrum clocking for low electromagnetic interference (EMI)
  • Integrated current sense (eliminates shunt resistor)
  • Proportional load current output on IPROPI pin
  • Configurable current regulation
  • Protection and diagnostic features with configurable fault reaction (latched or retry)
    • Load diagnostics in both the off-state and on-state to detect open load and short circuit
    • Voltage monitoring on supply (VM) and charge pump (VCP)
    • Over current protection
    • Over temperature protection
    • Fault indication on nFAULT pin
  • Supports 3.3V, 5V logic inputs
  • Low sleep current - 1µA typical at 25°C
  • Device family comparison table
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • 4.5-V to 35-V (40-V abs. max) operating range
  • SPI(S) or HW(H) variant in VQFN-HR package: RON_LS + RON_HS: 16mΩ
  • SPI(P) variant in HTSSOP package: RON_LS + RON_HS: 19mΩ
  • IOUT Max = 46A
  • PWM frequency operation up to 125KHz with automatic dead time assertion
  • Configurable slew rate and spread spectrum clocking for low electromagnetic interference (EMI)
  • Integrated current sense (eliminates shunt resistor)
  • Proportional load current output on IPROPI pin
  • Configurable current regulation
  • Protection and diagnostic features with configurable fault reaction (latched or retry)
    • Load diagnostics in both the off-state and on-state to detect open load and short circuit
    • Voltage monitoring on supply (VM) and charge pump (VCP)
    • Over current protection
    • Over temperature protection
    • Fault indication on nFAULT pin
  • Supports 3.3V, 5V logic inputs
  • Low sleep current - 1µA typical at 25°C
  • Device family comparison table

The DRV814x-Q1 family of devices is a fully integrated half-bridge driver intended for a wide range of automotive applications. Designed in a BiCMOS high power process technology node, this monolithic family of devices in a power package offer excellent power handling and thermal capability while providing compact package size, ease of layout, EMI control, accurate current sense, robustness, and diagnostic capability. This family provides an identical pin function with scalable RON (current capability) to support different loads.

The devices integrate a N-channel half-bridge, charge pump regulator, high-side current sensing with regulation, current proportional output, and protection circuitry. A low-power sleep mode is provided to achieve low quiescent current. The devices offer voltage monitoring and load diagnostics as well as protection features against over current and over temperature. Fault conditions are indicated on nFAULT pin. DRV8143 and DRV8145 are available in three variants - hardwired interface: HW (H) and two SPI interface variants: SPI(P) and SPI(S), with SPI (P) for externally supplied logic supply and SPI (S) for internally generated logic supply. DRV8144 is available only in two variants: SPI(S) and HW(H). The SPI interface variants offer more flexibility in device configuration and fault observability.

The DRV814x-Q1 family of devices is a fully integrated half-bridge driver intended for a wide range of automotive applications. Designed in a BiCMOS high power process technology node, this monolithic family of devices in a power package offer excellent power handling and thermal capability while providing compact package size, ease of layout, EMI control, accurate current sense, robustness, and diagnostic capability. This family provides an identical pin function with scalable RON (current capability) to support different loads.

The devices integrate a N-channel half-bridge, charge pump regulator, high-side current sensing with regulation, current proportional output, and protection circuitry. A low-power sleep mode is provided to achieve low quiescent current. The devices offer voltage monitoring and load diagnostics as well as protection features against over current and over temperature. Fault conditions are indicated on nFAULT pin. DRV8143 and DRV8145 are available in three variants - hardwired interface: HW (H) and two SPI interface variants: SPI(P) and SPI(S), with SPI (P) for externally supplied logic supply and SPI (S) for internally generated logic supply. DRV8144 is available only in two variants: SPI(S) and HW(H). The SPI interface variants offer more flexibility in device configuration and fault observability.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
DRV8143-Q1 現行 具有整合式電流感測與回饋的車用 40-V、20-A 半橋式驅動器 Half-bridge driver with higher current capability
DRV8144-Q1 現行 具有整合式電流感測與回饋的車用 40-V 30-A 半橋式驅動器 Half-bridge driver with lower current capability

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet DRV8145-Q1 Automotive Half Bridge Driver with Integrated Current Sense and Diagnostics datasheet (Rev. B) PDF | HTML 2024年 3月 26日
Product overview Scalable Integrated H-Bridges for Automotive Applications PDF | HTML 2024年 2月 27日
Certificate DRV8145H-Q1EVM EU RoHS Declaration of Conformity (DoC) 2022年 10月 24日
Functional safety information DRV8145-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021年 1月 14日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8145H-Q1EVM — 具硬體介面且適用於半橋馬達驅動器的 DRV8145-Q1 評估模組

DRV8145H-Q1EVM 評估模組展示 DRV8145H Hotrod 的功能和性能。配備專為大範圍汽車應用而設計的完整整合式半橋驅動器,適用具 4.5-V 至 35-V 操作電壓及 46-A 最大輸出電流的高電流應用。

使用指南: PDF | HTML
TI.com 無法提供
開發板

DRV8145P-Q1LEVM — 適用於採用引線封裝的高電流馬達驅動應用的 DRV8145P-Q1 評估模組

DRV8145P-Q1LEVM 評估模組展示 DRV8145P-Q1 的功能和性能。配備完全整合的半橋式驅動器,適用各種汽車應用。適合具 4.5 V 至 35 V 操作電壓與 46 A 最大輸出電流的高電流應用。

TI.com 無法提供
韌體

DRV824X-DRV814XQ1EVM-SOFTWARE Firmware and GUI files for the DRV824x-DRV814XQ1EVM

Firmware and GUI installer for the DRV814xx-Q1EVM and DRV824xx-Q1EVM
支援產品和硬體

支援產品和硬體

產品
有刷 DC (BDC) 馬達驅動器
DRV8243-Q1 具有整合式電流感測與回饋的車用 40-V、12-A 全橋驅動器 DRV8244-Q1 具有整合式電流感測與回饋的車用 40-V、21-A 全橋驅動器 DRV8245-Q1 具有整合式電流感測與回饋的車用 40-V、32-A 全橋驅動器 DRV8143-Q1 具有整合式電流感測與回饋的車用 40-V、20-A 半橋式驅動器 DRV8144-Q1 具有整合式電流感測與回饋的車用 40-V 30-A 半橋式驅動器 DRV8145-Q1 具有整合式電流感測與回饋的車用 40-V 46-A 半橋式驅動器 DRV8242-Q1 具有整合式電流感測與回饋的車用 40-V 6-A 全橋驅動器
硬體開發
開發板
DRV8143H-Q1EVM 適用高電流馬達驅動應用的 DRV8143H-Q1 評估模組 DRV8143P-Q1LEVM 適用於採用引線封裝的高電流馬達驅動應用的 DRV8143P-Q1 評估模組 DRV8144H-Q1EVM 具硬體介面且適用汽車半橋馬達驅動器的 DRV8144-Q1 評估模組 DRV8145H-Q1EVM 具硬體介面且適用於半橋馬達驅動器的 DRV8145-Q1 評估模組 DRV8145P-Q1LEVM 適用於採用引線封裝的高電流馬達驅動應用的 DRV8145P-Q1 評估模組
啟動 下載選項
模擬型號

DRV8145HPWP28RQ1 PSpice Unencrypted Transient Model

SLVMDV7.ZIP (276 KB) - PSpice Model
模擬型號

DRV8145PPWP28RQ1 PSpice Unencrypted Transient Model

SLVMDV8.ZIP (291 KB) - PSpice Model
模擬型號

DRV8145SPWP28RQ1 PSpice Unencrypted Transient Model

SLVMDV9.ZIP (285 KB) - PSpice Model
計算工具

SLVRBN2 Half Bridge Driver Junction Temperature Estimator

支援產品和硬體

支援產品和硬體

產品
有刷 DC (BDC) 馬達驅動器
DRV8143-Q1 具有整合式電流感測與回饋的車用 40-V、20-A 半橋式驅動器 DRV8144-Q1 具有整合式電流感測與回饋的車用 40-V 30-A 半橋式驅動器 DRV8145-Q1 具有整合式電流感測與回饋的車用 40-V 46-A 半橋式驅動器
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian
VQFN-HR (RXZ) 16 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片