首頁 馬達驅動器 步進馬達驅動器
首頁
馬達驅動器
步進馬達驅動器

DRV8845

現行

具備智慧調諧技術之 35-V、1.5-A 四路全橋馬達驅動器

立即訂購
產品規格表

DRV8845

現行
產品規格表 立即訂購

產品詳細資料

Number of full bridges 4 Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Full-scale current (A) 1.5 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 900 Sleep current (µA) 2 Control mode PWM Control interface Hardware (GPIO) Features Current Regulation, Smart Tune Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 4 Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Full-scale current (A) 1.5 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 900 Sleep current (µA) 2 Control mode PWM Control interface Hardware (GPIO) Features Current Regulation, Smart Tune Rating Catalog Operating temperature range (°C) -40 to 125
VQFN (RHH) 36 36 mm² 6 x 6

  • Integrates four H-bridges
  • Can drive different configurations -
    • Two stepper motors
    • Four brushed-DC motors

    • Three brushed-DC motors

    • One stepper and two brushed-DC motors

    • One stepper and one brushed-DC motor

  • Footprint and software compatible with similar drivers from other vendors
  • 4.5-V to 38-V Operating supply voltage range
  • Low RDS(ON): 900 mΩ HS + LS at 24 V, 25°C
  • 1.5-A full-scale current Per Bridge
  • Industry standard PHASE/Ixx Interface

  • Synchronous rectification

  • Full, 1/2 and 1/4 step operation for stepper motors

  • Forward, reverse and coast modes for DC motors

  • Smart tune decay for smooth and quiet operation

  • Supports 3.3 V and 5 V logic inputs

  • Protection features

    • VM undervoltage lockout (UVLO)
    • Charge pump undervoltage (CPUV)
    • Overcurrent protection (OCP)
    • Thermal shutdown (OTSD)

  • Integrates four H-bridges
  • Can drive different configurations -
    • Two stepper motors
    • Four brushed-DC motors

    • Three brushed-DC motors

    • One stepper and two brushed-DC motors

    • One stepper and one brushed-DC motor

  • Footprint and software compatible with similar drivers from other vendors
  • 4.5-V to 38-V Operating supply voltage range
  • Low RDS(ON): 900 mΩ HS + LS at 24 V, 25°C
  • 1.5-A full-scale current Per Bridge
  • Industry standard PHASE/Ixx Interface

  • Synchronous rectification

  • Full, 1/2 and 1/4 step operation for stepper motors

  • Forward, reverse and coast modes for DC motors

  • Smart tune decay for smooth and quiet operation

  • Supports 3.3 V and 5 V logic inputs

  • Protection features

    • VM undervoltage lockout (UVLO)
    • Charge pump undervoltage (CPUV)
    • Overcurrent protection (OCP)
    • Thermal shutdown (OTSD)

The DRV8845 is a quad full-bridge driver for a wide variety of industrial applications. The device can be used for driving up to two stepper motors or up to four brushed-DC motors. Each full-bridge output is rated up to 1.5 A and 38 V. The DRV8845 includes pulse width modulation (PWM) current regulators, along with 2- bit nonlinear DACs (digital-to-analog converters) that allow stepper motors to be controlled in full, half, and quarter steps; and DC motors in forward, reverse, and coast modes.

The PWM current regulator uses the smart tune decay mode for motor audible noise and vibration reduction, increased accuracy, and reduced power dissipation. Internal synchronous rectification control circuitry is provided to improve power dissipation during PWM operation.

Protection features include thermal shutdown with hysteresis (OTSD), undervoltage lockout (UVLO) and overcurrent protection (OCP). Special power up sequencing is not required.

The DRV8845 is supplied in a 6 mm x 6 mm, 36 pin QFN package with exposed pad for enhanced thermal performance.

The DRV8845 is a quad full-bridge driver for a wide variety of industrial applications. The device can be used for driving up to two stepper motors or up to four brushed-DC motors. Each full-bridge output is rated up to 1.5 A and 38 V. The DRV8845 includes pulse width modulation (PWM) current regulators, along with 2- bit nonlinear DACs (digital-to-analog converters) that allow stepper motors to be controlled in full, half, and quarter steps; and DC motors in forward, reverse, and coast modes.

The PWM current regulator uses the smart tune decay mode for motor audible noise and vibration reduction, increased accuracy, and reduced power dissipation. Internal synchronous rectification control circuitry is provided to improve power dissipation during PWM operation.

Protection features include thermal shutdown with hysteresis (OTSD), undervoltage lockout (UVLO) and overcurrent protection (OCP). Special power up sequencing is not required.

The DRV8845 is supplied in a 6 mm x 6 mm, 36 pin QFN package with exposed pad for enhanced thermal performance.
filter 尋找其它 步進馬達驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
DRV8849 現行 具智慧調諧及整合式電流感測的 38-V 1.5-A 雙全橋步進馬達驅動器 STEP/DIR interface with 1/256 microstepping and integrated current sense

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet DRV8845: 38 V, 1.5 A Quad H-Bridge Motor Driver with Smart Tune Technology datasheet (Rev. A) PDF | HTML 2023年 12月 21日
Product overview Brushed and Stepper Motor Drivers in Video Surveillance PDF | HTML 2024年 2月 22日
Product overview Two New Dual-Stepper Motor Drivers PDF | HTML 2024年 2月 22日
Certificate DRV8845EVM EU RoHS Declaration of Conformity (DoC) 2023年 3月 28日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8845EVM — 適用於具有智慧調諧技術的四路全橋馬達驅動器的 DRV8845 評估模組

DRV8845 是適用於各種工業應用的四路全橋驅動器。此裝置可用於驅動最多兩個步進馬達或最多四個有刷 DC 馬達。每個全橋輸出的額定值高達 1.5 A 與 38 V。此驅動器提供智慧型調諧衰退模式，使運作過程順暢安靜。此驅動器中的防護功能包括具磁滯 (OTSD) 的過熱自動關機、欠壓閉鎖 (UVLO) 和過電流防護 (OCP)。
使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHH) 36 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片