首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

LM2876

現行

具靜音功能的高性能 40 瓦音訊功率放大器

立即訂購
產品規格表

LM2876

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 60 Power stage supply (min) (V) 20 Load (min) (Ω) 4 Output power (W) 40 THD + N at 1 kHz (%) 0.06 Iq (typ) (mA) 24 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 20 Analog supply voltage (max) (V) 60 PSRR (dB) 125 Operating temperature range (°C) -20 to 85
Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 60 Power stage supply (min) (V) 20 Load (min) (Ω) 4 Output power (W) 40 THD + N at 1 kHz (%) 0.06 Iq (typ) (mA) 24 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 20 Analog supply voltage (max) (V) 60 PSRR (dB) 125 Operating temperature range (°C) -20 to 85
TO-220 (NDA) 11 195.4953 mm² 20.02 x 9.765
  • 40W Continuous Average Output Power Into 8Ω
  • 75W Instantaneous Peak Output Power Capability
  • Signal-to-Noise Ratio ≥ 95 dB(min)
  • An Input Mute Function
  • Output Protection From A Short to Ground Or to the Supplies Via Internal Current Limiting Circuitry
  • Output Over-Voltage Protection Against Transients From Inductive Loads
  • Supply Under-Voltage Protection, Not Allowing Internal Biasing to Occur When |VEE| + |VCC| ≤ 12V, Thus Eliminating Turn-On and Turn-Off Transients
  • 11-Lead PFM Package
  • Wide Supply Range 20V - 72V

All trademarks are the property of their respective owners.

  • 40W Continuous Average Output Power Into 8Ω
  • 75W Instantaneous Peak Output Power Capability
  • Signal-to-Noise Ratio ≥ 95 dB(min)
  • An Input Mute Function
  • Output Protection From A Short to Ground Or to the Supplies Via Internal Current Limiting Circuitry
  • Output Over-Voltage Protection Against Transients From Inductive Loads
  • Supply Under-Voltage Protection, Not Allowing Internal Biasing to Occur When |VEE| + |VCC| ≤ 12V, Thus Eliminating Turn-On and Turn-Off Transients
  • 11-Lead PFM Package
  • Wide Supply Range 20V - 72V

All trademarks are the property of their respective owners.

The LM2876 is a high-performance audio power amplifier capable of delivering 40W of continuous average power to an 8Ω load with 0.1% THD+N from 20Hz–20kHz.

The performance of the LM2876, utilizing its Self Peak Instantaneous Temperature (°Ke) (SPiKe) protection circuitry, puts it in a class above discrete and hybrid amplifiers by providing an inherently, dynamically protected Safe Operating Area (SOA). SPiKe protection means that these parts are completely safeguarded at the output against overvoltage, undervoltage, overloads, including shorts to the supplies, thermal runaway, and instantaneous temperature peaks.

The LM2876 maintains an excellent signal-to-noise ratio of greater than 95dB (min) with a typical low noise floor of 2.0μV. It exhibits extremely low THD+N values of 0.06% at the rated output into the rated load over the audio spectrum, and provides excellent linearity with an IMD (SMPTE) typical rating of 0.004%.

The LM2876 is a high-performance audio power amplifier capable of delivering 40W of continuous average power to an 8Ω load with 0.1% THD+N from 20Hz–20kHz.

The performance of the LM2876, utilizing its Self Peak Instantaneous Temperature (°Ke) (SPiKe) protection circuitry, puts it in a class above discrete and hybrid amplifiers by providing an inherently, dynamically protected Safe Operating Area (SOA). SPiKe protection means that these parts are completely safeguarded at the output against overvoltage, undervoltage, overloads, including shorts to the supplies, thermal runaway, and instantaneous temperature peaks.

The LM2876 maintains an excellent signal-to-noise ratio of greater than 95dB (min) with a typical low noise floor of 2.0μV. It exhibits extremely low THD+N values of 0.06% at the rated output into the rated load over the audio spectrum, and provides excellent linearity with an IMD (SMPTE) typical rating of 0.004%.
filter 尋找其它 喇叭放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet LM2876 Overture Audio Pwr Amp Series High-Perf 40W Audio Pwr Amplifier w/Mute datasheet (Rev. C) 2013年 3月 20日
Application note AN-1192 Overture Series High Power Solutions (Rev. B) 2013年 5月 1日
Application note AN-898 Audio Amplifiers Utilizing: SPiKe Protection (Rev. B) 2013年 5月 1日
More literature Die D/S LM2876 MDC High-Performance 40 Watt Audio Power Amplifier W/Mute 2012年 9月 20日
Application note Voltage Spike Measurement Technique and Specification (Rev. A) 2003年 11月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

LM2876 TINA-TI Reference Design

SNAM088.TSC (101 KB) - TINA-TI Reference Design
下載
模擬型號

LM2876 TINA-TI Spice Model

SNAM087.ZIP (21 KB) - TINA-TI Spice Model
下載
模擬型號

LM2876 Unencrypted PSpice Model Package (Rev. A)

SNAM085A.ZIP (21 KB) - PSpice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TO-220 (NDA) 11 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片