首頁 音訊 音訊放大器 耳機放大器
首頁
音訊
音訊放大器
耳機放大器

LM48821

現行

52-mW、立體聲道、類比輸入耳機放大器

立即訂購
產品規格表

LM48821

現行
產品規格表 立即訂購

產品詳細資料

Output power (W) 0.053 Analog supply (min) (V) 2 Analog supply voltage (max) (V) 4 Load (min) (Ω) 16 PSRR (dB) 82 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control Yes Shutdown current (ISD) (µA) 0.1 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 1.5
Output power (W) 0.053 Analog supply (min) (V) 2 Analog supply voltage (max) (V) 4 Load (min) (Ω) 16 PSRR (dB) 82 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control Yes Shutdown current (ISD) (µA) 0.1 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 1.5
DSBGA (YZR) 16 5.0625 mm² 2.25 x 2.25
  • Ground Referenced Outputs
  • Differential Inputs
  • I2C Volume and Mode Controls
  • Available in Space-Saving DSBGA Package
  • Ultra Low Current Shutdown Mode
  • Advanced Output Transient Suppression Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.0V to 4.0V Operation (PVDD and SVDD)
  • 1.8 to 4.0V Operation (I2CVDD)
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required

Key Specifications

  • Improved PSRR at 217Hz: 82dB (typ)
  • Stereo Output Power at VDD = 3V, RL = 16Ω, THD+N = 1%: 52mW (typ)
  • Mono Output Power at VDD = 3V, RL = 16Ω, THD+N = 1%: 93mW (typ)
  • Shutdown current: 0.1μA (typ)

All trademarks are the property of their respective owners.

  • Ground Referenced Outputs
  • Differential Inputs
  • I2C Volume and Mode Controls
  • Available in Space-Saving DSBGA Package
  • Ultra Low Current Shutdown Mode
  • Advanced Output Transient Suppression Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.0V to 4.0V Operation (PVDD and SVDD)
  • 1.8 to 4.0V Operation (I2CVDD)
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required

Key Specifications

  • Improved PSRR at 217Hz: 82dB (typ)
  • Stereo Output Power at VDD = 3V, RL = 16Ω, THD+N = 1%: 52mW (typ)
  • Mono Output Power at VDD = 3V, RL = 16Ω, THD+N = 1%: 93mW (typ)
  • Shutdown current: 0.1μA (typ)

All trademarks are the property of their respective owners.

With its directly-coupled output technology, the LM48821 is a variable gain audio power amplifier capable of delivering 52mWRMS per channel into a 16Ω single-ended load with less than 1% THD+N from a 3V power supply. The I2C volume control has a range of –76dB to 18dB.

The LM48821's Tru-GND technology utilizes advanced charge pump technology to generate the LM48821’s negative supply voltage. This eliminates the need for output-coupling capacitors typically used with single-ended loads.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM48821 does not require output coupling capacitors or bootstrap capacitors, and therefore, is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM48821 incorporates selectable low-power consumption shutdown and channel select modes.

The LM48821 contains advanced output transient suppression circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

With its directly-coupled output technology, the LM48821 is a variable gain audio power amplifier capable of delivering 52mWRMS per channel into a 16Ω single-ended load with less than 1% THD+N from a 3V power supply. The I2C volume control has a range of –76dB to 18dB.

The LM48821's Tru-GND technology utilizes advanced charge pump technology to generate the LM48821’s negative supply voltage. This eliminates the need for output-coupling capacitors typically used with single-ended loads.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM48821 does not require output coupling capacitors or bootstrap capacitors, and therefore, is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM48821 incorporates selectable low-power consumption shutdown and channel select modes.

The LM48821 contains advanced output transient suppression circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

filter 尋找其它 耳機放大器
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet Direct Coupled, Ultra Low Noise, 52mW Diff Input Stereo Hp Amp w/I2C Vol Cntrl datasheet (Rev. A) 2013年 5月 3日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​