首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

TAS5722L

現行

15-W 單聲道、4.5 至 17-V 供電、數位輸入 D 級音訊放大器

立即訂購
產品規格表

TAS5722L

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Digital Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 16.5 Power stage supply (min) (V) 4.5 Load (min) (Ω) 3.2 Output power (W) 15 SNR (dB) 106 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 15 Control interface Software Closed/open loop Closed Analog supply (min) (V) 4.5 Analog supply voltage (max) (V) 17 Sampling rate (max) (kHz) 96 PSRR (dB) 69 Operating temperature range (°C) -25 to 85
Audio input type Digital Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 16.5 Power stage supply (min) (V) 4.5 Load (min) (Ω) 3.2 Output power (W) 15 SNR (dB) 106 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 15 Control interface Software Closed/open loop Closed Analog supply (min) (V) 4.5 Analog supply voltage (max) (V) 17 Sampling rate (max) (kHz) 96 PSRR (dB) 69 Operating temperature range (°C) -25 to 85
VQFN (RSM) 32 16 mm² 4 x 4
  • Mono Class-D Amplifier
    • 15 W @ 0.02% THD Continuous into 4 Ω, 17 V
  • >90% Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Audio performance(PVDD = 16.5 V, RSPK = 4Ω)
    • Idle Channel Noise = 45 µVRMS (A-Wtd)
    • THD+N = 0.04% (at 1 W, 1 kHz)
    • SNR=106 dB A-Wtd (Ref.to THD+N = 1%)
  • I2S input : 32 kHz to 96 kHz
  • TDM Audio Input
    • Up to 8 Channels (32-bit, 96 kHz)
  • I2C Control with 8 Selectable I2C Address
  • Power Supplies
    • Power Amplifier: 4.5 V to 17 V
    • Digital I/O: 1.8 V
  • Robustness features
    • Clock Error Detector, DC Offset and Short-Circuit Protection
    • Over Voltage, Under Voltage and Over Temperature Protection
  • Mono Class-D Amplifier
    • 15 W @ 0.02% THD Continuous into 4 Ω, 17 V
  • >90% Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Audio performance(PVDD = 16.5 V, RSPK = 4Ω)
    • Idle Channel Noise = 45 µVRMS (A-Wtd)
    • THD+N = 0.04% (at 1 W, 1 kHz)
    • SNR=106 dB A-Wtd (Ref.to THD+N = 1%)
  • I2S input : 32 kHz to 96 kHz
  • TDM Audio Input
    • Up to 8 Channels (32-bit, 96 kHz)
  • I2C Control with 8 Selectable I2C Address
  • Power Supplies
    • Power Amplifier: 4.5 V to 17 V
    • Digital I/O: 1.8 V
  • Robustness features
    • Clock Error Detector, DC Offset and Short-Circuit Protection
    • Over Voltage, Under Voltage and Over Temperature Protection

The TAS5722L device is a high-efficiency mono Class-D audio power amplifier which includes integrated digital output clipper, several gain options, and a wide power supply operating range. It operates with a nominal supply voltage from 4.5 V to 17 VDC.

TAS5722L is optimized for high transient power capability to utilize the dynamic power headroom of small loudspeakers. It is capable of delivering more than 15 W of continuous power into a 4-Ω speaker.

The digital time division multiplexed (TDM) interface enables up to 8 devices to share the same bus.

The TAS5722L device is available in a 4 mm × 4 mm, 32-pin QFN package.

The TAS5722L device is a high-efficiency mono Class-D audio power amplifier which includes integrated digital output clipper, several gain options, and a wide power supply operating range. It operates with a nominal supply voltage from 4.5 V to 17 VDC.

TAS5722L is optimized for high transient power capability to utilize the dynamic power headroom of small loudspeakers. It is capable of delivering more than 15 W of continuous power into a 4-Ω speaker.

The digital time division multiplexed (TDM) interface enables up to 8 devices to share the same bus.

The TAS5722L device is available in a 4 mm × 4 mm, 32-pin QFN package.
filter 尋找其它 喇叭放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TAS5722L 15-W Digital Input Mono Class-D Audio Amplifier datasheet (Rev. A) PDF | HTML 2016年 12月 16日
EVM User's guide TAS5722LEVM User's Guide 2016年 9月 15日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RSM) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片