TMUX7202
- Latch-up immune
- Dual supply range: ±4.5V to ±22V
- Single supply range: 4.5V to 44V
- Low On-Resistance: 1.2Ω
- Low charge injection: −10pC
- –40°C to +125°C operating temperature
- Integrated Pull-Down resistor on logic pins
- 1.8V logic compatible
- Fail-safe logic
- Rail to rail operation
- Bidirectional signal path
- Break-before-make switching
The TMUX720x is a complementary metal-oxide semiconductor (CMOS) switch with latch-up immunity in a single channel, 1:1 (SPST) configuration. The device works with a single supply (4.5V to 44V), dual supplies (±4.5V to ±22V), or asymmetric supplies (such as VDD = 12V, VSS = –5V). The TMUX720x supports bidirectional analog and digital signals on the source (S) and drain (D) pin ranging from VSS to VDD.
The TMUX720x can be enabled or disabled by controlling the SEL pin. When disabled, both signal path switches are off. All logic control inputs support logic levels from 1.8V to VDD, which is compatible for both TTL and CMOS logic when operating in the valid supply voltage range. Fail-Safe Logic circuitry allows voltages on the control pins to be applied before the supply pin, protecting the device from potential damage.
The TMUX72xx family provides latch-up immunity, preventing undesirable high current events between parasitic structures within the device typically caused by overvoltage events. A latch-up condition typically continues until the power supply rails are turned off and can lead to device failure. The latch-up immunity feature allows the TMUX72xx family of switches and multiplexers to be used in harsh environments.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TMUX720x 44V, Low-RON, 1:1 (SPST), 1-Channel Precision Switch With Latch-Up Immunity and 1.8V Logic datasheet (Rev. C) | PDF | HTML | 2024年 10月 2日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TMUX-8RQX-EVM — 適用於 8 針腳 RQX 的 TMUX 評估模組
TMUX-8RQX-EVM 允許在 8 針腳 RQX 封裝提供中型電壓多工器的快速原型設計。
TMUX72XXDGKEVM — TMUX72xx DGK 封裝評估模組
TMUX72XXDGKEVM 支援評估採用 8 針腳 VSSOP (DGK) 封裝的 TMUX72xx 裝置,包括 TMUX7219DGK。此評估模組可用於快速進行專為 DC 參數之 TMUX72xx 裝置的原型設計及測試。
LEADLESS-ADAPTER1 — 用於測試 TI 的 6、8、10、12、14、16 和 20 針腳無引線封裝的表面貼裝至 DIP 接頭適配器
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WSON (RQX) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。