產品詳細資料

Configuration 1:1 SPST Number of channels 8 Power supply voltage - single (V) 5, 12, 16, 20, 36, 40 Power supply voltage - dual (V) +/- 25, +/-10, +/-15, +/-18, +/-22, +/-5 Protocols SPI Ron (typ) (Ω) 1 CON (typ) (pF) 22 ON-state leakage current (max) (µA) 0.0008 Supply current (typ) (µA) 840 Bandwidth (MHz) 180 Operating temperature range (°C) -40 to 125 Features 1.2-V compatible control inputs, 1.8-V compatible control inputs, Break-before-make Input/output continuous current (max) (mA) 470 Rating Catalog Supply voltage (max) (V) 42 Negative rail supply voltage (max) (V) -25
Configuration 1:1 SPST Number of channels 8 Power supply voltage - single (V) 5, 12, 16, 20, 36, 40 Power supply voltage - dual (V) +/- 25, +/-10, +/-15, +/-18, +/-22, +/-5 Protocols SPI Ron (typ) (Ω) 1 CON (typ) (pF) 22 ON-state leakage current (max) (µA) 0.0008 Supply current (typ) (µA) 840 Bandwidth (MHz) 180 Operating temperature range (°C) -40 to 125 Features 1.2-V compatible control inputs, 1.8-V compatible control inputs, Break-before-make Input/output continuous current (max) (mA) 470 Rating Catalog Supply voltage (max) (V) 42 Negative rail supply voltage (max) (V) -25
FCLGA (ZEM) 30 20 mm² 5 x 4
  • Dual supply range: ±4.5V to ±25V
  • Single supply range: 4.5V to 42V
  • Asymmetric dual supply support (For example: VDD=37.5V, VSS=-12.5V)
  • 1.8V logic compatible
  • SPI supply range: 1.8V – 5.5V
  • SPI Interface with support up to 50MHz
    • Manual mode (Standard SPI or Burst mode)
    • SPI error detection: CRC, invalid read/write, and clock count error
    • Compatible with SPI industry standard modes 0 and 3
  • Ultra high channel density (2.5mm2/ch)
    • Flow through SPI and supply routing for increased board density
    • Integrated decoupling capacitors
  • Precision performance:
    • Low on-resistance: 1Ω (typical)
    • Ultra low on-resistance flatness: 0.001Ω (typical)
    • Low on-leakage current: 13pA (typical), 350pA (maximum)
    • Ultra low charge injection: 2pC (typical)
  • High current support: 470mA per channel (maximum)
  • –40°C to +125°C operating temperature
  • Rail-to-rail operation
  • Bidirectional operation
  • Break-before-make switching
  • ESD protection HBM: 3000V
  • Dual supply range: ±4.5V to ±25V
  • Single supply range: 4.5V to 42V
  • Asymmetric dual supply support (For example: VDD=37.5V, VSS=-12.5V)
  • 1.8V logic compatible
  • SPI supply range: 1.8V – 5.5V
  • SPI Interface with support up to 50MHz
    • Manual mode (Standard SPI or Burst mode)
    • SPI error detection: CRC, invalid read/write, and clock count error
    • Compatible with SPI industry standard modes 0 and 3
  • Ultra high channel density (2.5mm2/ch)
    • Flow through SPI and supply routing for increased board density
    • Integrated decoupling capacitors
  • Precision performance:
    • Low on-resistance: 1Ω (typical)
    • Ultra low on-resistance flatness: 0.001Ω (typical)
    • Low on-leakage current: 13pA (typical), 350pA (maximum)
    • Ultra low charge injection: 2pC (typical)
  • High current support: 470mA per channel (maximum)
  • –40°C to +125°C operating temperature
  • Rail-to-rail operation
  • Bidirectional operation
  • Break-before-make switching
  • ESD protection HBM: 3000V

The TMUXS7614D is a complementary metal-oxide semiconductor (CMOS) switch device with eight independently selectable 1:1, single-pole, single-throw (SPST) switch channels. The device works with a single supply (4.5V to 42V), dual supplies (±4.5V to ±25V), or asymmetric supplies (such as VDD = 37.5V, VSS = –12V). The TMUXS7614D supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins ranging from VSS to VDD.

The switches of the TMUXS7614D are controlled with a serial peripheral interface (SPI). The SPI interface has many error detection features, such as CRC, invalid read/write, and clock count error detection. The SPI also supports Daisy Chain mode. Coupled with the flow through routing of the SPI pins, this allows for increased channel density in the system. The TMUXS7614D is a part of the precision switches and multiplexers family of devices that have very low on and off leakage currents allowing them to be used in high precision measurement applications.

The TMUXS7614D is a complementary metal-oxide semiconductor (CMOS) switch device with eight independently selectable 1:1, single-pole, single-throw (SPST) switch channels. The device works with a single supply (4.5V to 42V), dual supplies (±4.5V to ±25V), or asymmetric supplies (such as VDD = 37.5V, VSS = –12V). The TMUXS7614D supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins ranging from VSS to VDD.

The switches of the TMUXS7614D are controlled with a serial peripheral interface (SPI). The SPI interface has many error detection features, such as CRC, invalid read/write, and clock count error detection. The SPI also supports Daisy Chain mode. Coupled with the flow through routing of the SPI pins, this allows for increased channel density in the system. The TMUXS7614D is a part of the precision switches and multiplexers family of devices that have very low on and off leakage currents allowing them to be used in high precision measurement applications.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TMUXS7614D 50V, SPI Controlled, Low-RON, High Density, 1:1 (SPST), 8-Channel Precision Switches with 1.8V Logi datasheet (Rev. B) 2024年 10月 30日
Application note Using SPI Controlled MUX To Increase Channel Density PDF | HTML 2024年 6月 14日
Application note When to Replace a Relay With a Multiplexer (Rev. A) PDF | HTML 2024年 6月 7日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TMUXS7614DEVM — TMUXS7614D 評估模組

TMUXS7614DEVM 可評估 TMUXS7614D 的性能。評估模組 (EVM) 以焊接方式隨附於 TMUXS7614D 裝置。工程師可透過此 EVM 輕鬆評估 TMUXS7614D 的應用,例如測試與量測。
使用指南: PDF | HTML
模擬型號

TMUX76XX-8SW-TMUXS7614 IBIS Model

SCDM329.ZIP (37 KB) - IBIS Model
封裝 針腳 CAD 符號、佔位空間與 3D 模型
FCLGA (ZEM) 30 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片