TPA0213

現行

具有耳機放大器和獨立 SE 和 BTL 輸入的 2-W、單聲道類比輸入 AB 類音訊放大器

立即訂購

產品規格表

document-pdfAcrobat 2-W Mono Audio Power Amp with Headphone Drive datasheet (Rev. D) (英文)

TPA0213

現行

產品規格表

立即訂購

產品詳細資料

Audio input type

Analog Input

Architecture

Class-AB

Speaker channels (max)

Mono

Rating

Catalog

Power stage supply (max) (V)

5.5

Power stage supply (min) (V)

2.5

Load (min) (Ω)

Output power (W)

SNR (dB)

THD + N at 1 kHz (%)

0.2

Iq (typ) (mA)

4.2

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

2.5

Analog supply voltage (max) (V)

5.5

PSRR (dB)

Operating temperature range (°C)

-40 to 85

Audio input type

Analog Input

Architecture

Class-AB

Speaker channels (max)

Mono

Rating

Catalog

Power stage supply (max) (V)

5.5

Power stage supply (min) (V)

2.5

Load (min) (Ω)

Output power (W)

SNR (dB)

THD + N at 1 kHz (%)

0.2

Iq (typ) (mA)

4.2

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

2.5

Analog supply voltage (max) (V)

5.5

PSRR (dB)

Operating temperature range (°C)

-40 to 85

HVSSOP (DGQ)

14.7 mm² 3 x 4.9

Ideal for Notebook Computers, PDAs, and Other Small Portable Audio Devices
2 W Into 4 From 5-V Supply
0.6 W Into 4 From 3-V Supply
Stereo Headphone Drive
Separate Inputs for the Mono (BTL) Signal, and Stereo (SE) Left/Right Signals
Wide Power Supply Compatibility 2.5 V to 5.5 V
Low Supply Current
- 4.2 mA Typical at 5 V
- 3.6 mA Typical at 3 V
Shutdown Control ...1 uA Typical
Shutdown Pin Is TTL Compatible
–40°C to 85°C Operating Temperature Range
Space-Saving, Thermally-Enhanced MSOP Packaging

Ideal for Notebook Computers, PDAs, and Other Small Portable Audio Devices
2 W Into 4 From 5-V Supply
0.6 W Into 4 From 3-V Supply
Stereo Headphone Drive
Separate Inputs for the Mono (BTL) Signal, and Stereo (SE) Left/Right Signals
Wide Power Supply Compatibility 2.5 V to 5.5 V
Low Supply Current
- 4.2 mA Typical at 5 V
- 3.6 mA Typical at 3 V
Shutdown Control ...1 uA Typical
Shutdown Pin Is TTL Compatible
–40°C to 85°C Operating Temperature Range
Space-Saving, Thermally-Enhanced MSOP Packaging

The TPA0213 is a 2-W mono bridge-tied-load (BTL) amplifier designed to drive speakers with as low as 4- speaker.

The gain of the input stage is set by the user-selected input resistor and a 50-k/R_I in BTL mode.

The TPA0213 is available in the 10-pin thermally-enhanced MSOP package (DGQ) and operates over an ambient temperature range of –40°C to 85°C.

The TPA0213 is a 2-W mono bridge-tied-load (BTL) amplifier designed to drive speakers with as low as 4- speaker.

The gain of the input stage is set by the user-selected input resistor and a 50-k/R_I in BTL mode.

The TPA0213 is available in the 10-pin thermally-enhanced MSOP package (DGQ) and operates over an ambient temperature range of –40°C to 85°C.

filter

尋找其它喇叭放大器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

功能相似於所比較的產品

TPA0103

現行

1.75-W 立體聲道、類比輸入 AB 類音訊放大器 The TPA0212 is a 2-W, mono speaker driver with integrated stereo headphone Class-AB Audio Power Amplifier, featuring seperate inputs, available in MSOP Package.

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 2

	類型	標題		日期
*	Data sheet	2-W Mono Audio Power Amp with Headphone Drive datasheet (Rev. D)		2002年 10月 4日
	User guide	TPA0213 Audio Power Amplifier Evaluation Module		2000年 10月 17日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

要求