TPA3113D2
- 6-W/ch into an 8-Ω Loads at 10% THD+N From a
10-V Supply - 12-W into a 4-Ω Mono Load at 10% THD+N From
a 10-V Supply - 87% Efficient Class-D Operation Eliminates Need
for Heat Sinks - Wide Supply Voltage Range Allows Operation
from 8 V to 26 V - Filter-Free Operation
- SpeakerGuard Speaker Protection Includes
Adjustable Power Limiter Plus DC Protection - Flow-Through Pinout Facilitates Easy Board
Layout - Robust Pin-to-Pin Short-Circuit Protection and
Thermal Protection With Auto Recovery Option - Excellent THD+N and Pop-Free Performance
- Four Selectable, Fixed Gain Settings
- Differential Inputs
- APPLICATIONS
- Televisions
- Consumer Audio Equipment
- Monitors
All other trademarks are the property of their respective owners
The TPA3113D2 is a 6-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard™ speaker protection circuitry includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a virtual voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs.
The TPA3113D2 can drive stereo speakers as low as 4 Ω. The high efficiency of the TPA3113D2, 87%, eliminates the need for an external heat sink when playing music.
The outputs are also fully protected against shorts to GND, VCC, and output-to-output. The short-circuit protection and thermal protection includes an auto-recovery feature.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPA3113D2 6-W Filter-Free Stereo Class-D Audio Power Amplifier With SpeakerGuard™ datasheet (Rev. F) | PDF | HTML | 2016年 6月 30日 |
Application note | Using Thermal Calculation Tools for Analog Components (Rev. A) | 2019年 8月 30日 | ||
Application note | Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) | 2019年 8月 26日 | ||
Application note | AN-1849 An Audio Amplifier Power Supply Design (Rev. C) | 2019年 6月 27日 | ||
Application brief | TPA3138 Transition Guide – from TPA3110, TPA3113 | 2018年 7月 6日 | ||
Application note | DC Detect on TPA311xDx Devices | 2017年 12月 6日 | ||
Application note | AN-1737 Managing EMI in Class D Audio Applications (Rev. A) | 2013年 5月 1日 | ||
User guide | TPA3113D2 EVM Audio Amplifier Evaluation Board (Rev. A) | 2010年 7月 7日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPA3113D2EVM — TPA3113D2 評估模組
The TPA3113D2 is a 6-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard™ speaker protection circuitry (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
HTSSOP (PWP) | 28 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。