首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

TPA3139D2

現行

10W 3.5V 至 14.4V 無電感器立體聲道 QFN 類比輸入 D 類音訊放大器

立即訂購
產品規格表

TPA3139D2

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Rating Catalog Power stage supply (max) (V) 14.4 Power stage supply (min) (V) 3.5 Load (min) (Ω) 3.2 Output power (W) 10 SNR (dB) 102 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 20 Control interface Hardware Closed/open loop Closed Analog supply (min) (V) 3.5 Analog supply voltage (max) (V) 14.4 PSRR (dB) 70 Operating temperature range (°C) -10 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Rating Catalog Power stage supply (max) (V) 14.4 Power stage supply (min) (V) 3.5 Load (min) (Ω) 3.2 Output power (W) 10 SNR (dB) 102 THD + N at 1 kHz (%) 0.04 Iq (typ) (mA) 20 Control interface Hardware Closed/open loop Closed Analog supply (min) (V) 3.5 Analog supply voltage (max) (V) 14.4 PSRR (dB) 70 Operating temperature range (°C) -10 to 85
VQFN (RGE) 24 16 mm² 4 x 4
  • 2 × 3 W into 8-Ω, 1% THD+N, 7.4-V supply
  • 2 × 10 W into 8-Ω, 1% THD+N, 13.5-V supply
  • Fast Turn-on time < 15 ms
  • Wide supply range 3.5-V to 14.4-V
  • Low idle current and small footprint for portable audio applications
    • 4 x 4 mm2 QFN-24 package
    • 20-mA (12-V) idle current with 1SPW modulation
    • > 90% Class-D efficiency
  • Flexible audio solution:
    • MUTE signal for fast enable and enable of outputs
    • Single-ended or differential analog inputs
    • Selectable gain: 20 dB and 26 dB
  • Integrated Protections and Auto Recovery:
    • Pin-to-pin, pin-to-ground, and pin-to-power short circuit protection
    • Thermal protection, undervoltage protection, and overvoltage protection
    • Power limiter and DC speaker protection
  • Spread-spectrum modulation reduces EMI emission
  • Reduced solution size and cost:
    • EN55022 EMC compliant with ferrite bead filters
    • No external heatsink required
  • 2 × 3 W into 8-Ω, 1% THD+N, 7.4-V supply
  • 2 × 10 W into 8-Ω, 1% THD+N, 13.5-V supply
  • Fast Turn-on time < 15 ms
  • Wide supply range 3.5-V to 14.4-V
  • Low idle current and small footprint for portable audio applications
    • 4 x 4 mm2 QFN-24 package
    • 20-mA (12-V) idle current with 1SPW modulation
    • > 90% Class-D efficiency
  • Flexible audio solution:
    • MUTE signal for fast enable and enable of outputs
    • Single-ended or differential analog inputs
    • Selectable gain: 20 dB and 26 dB
  • Integrated Protections and Auto Recovery:
    • Pin-to-pin, pin-to-ground, and pin-to-power short circuit protection
    • Thermal protection, undervoltage protection, and overvoltage protection
    • Power limiter and DC speaker protection
  • Spread-spectrum modulation reduces EMI emission
  • Reduced solution size and cost:
    • EN55022 EMC compliant with ferrite bead filters
    • No external heatsink required

The TPA3139D2 is a 10-W stereo Class-D audio amplifier, featuring a fast turn-on time of <15 ms and mute function. It consumes low idle current of only 20-mA (12-V) and can operate down to 3.5-V, allowing for longer audio playback. Along with a small, 4 x 4 mm2 QFN package, the TPA3139D2 is optimized for 2-cell or 3-cell battery-powered systems with the space constraints. In addition, the Spread Spectrum Control enables the use of inexpensive ferrite bead filters while meeting EMC requirements for system cost reduction.

To further simplify the design, the TPA3139D2 integrates essential protection features including undervoltage, overvoltage, power limit, short circuit, overtemperature, as well as DC speaker protection. All of these protections support automatic recovery.

The TPA3139D2 is a 10-W stereo Class-D audio amplifier, featuring a fast turn-on time of <15 ms and mute function. It consumes low idle current of only 20-mA (12-V) and can operate down to 3.5-V, allowing for longer audio playback. Along with a small, 4 x 4 mm2 QFN package, the TPA3139D2 is optimized for 2-cell or 3-cell battery-powered systems with the space constraints. In addition, the Spread Spectrum Control enables the use of inexpensive ferrite bead filters while meeting EMC requirements for system cost reduction.

To further simplify the design, the TPA3139D2 integrates essential protection features including undervoltage, overvoltage, power limit, short circuit, overtemperature, as well as DC speaker protection. All of these protections support automatic recovery.
filter 尋找其它 喇叭放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
TPA3138D2 現行 無電感器的 10W 立體聲道、18.5W 單聲道、3.5 至 14.4V 類比輸入 D 類音訊放大器 TPA3138D2 offers similar functionality in a TSSOP28 package.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPA3139D2 10-W Stereo, 3.5-V to 14.4-V, Low-Idle-Current, Inductor Free Class D Amplifier datasheet (Rev. A) PDF | HTML 2020年 7月 24日
EVM User's guide TPA3139D2 Evaluation Module User's Guide 2019年 7月 15日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPA3139D2EVM — TPA3139D2 無電感器 10W 立體聲道 (BTL) D 類音訊放大器評估模組

The TPA3139D2EVM customer evaluation module demonstrates the TPA3139D2 integrated circuit from Texas Instruments. The TPA3139D2 is a 10-W (per channel) efficient stereo digital amplifier power stage for driving two bridge-tied speakers.
使用指南: PDF
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片