Home
Design & development

DRV8300DIPW-EVM

DRV8300DIPW evaluation module for three-phase BLDC

Order now

DRV8300DIPW-EVM

Order now

Overview

The DRV8300DIPW-EVM is a 30A, 3-phase brushless DC drive stage based on the DRV8300DIPW gate driver for BLDC motors. The DRV8300DIPW incorporates three diodes for bootstrap operation without the need for external diodes.

The EVM includes three current shunt amplifiers for low-side current measurement as well as feedback for PVDD/GVDD voltage and board temperature. Up to 100V can be supplied to the EVM and the on board buck will generate the 12V needed for the bootstrap GVDD supply. Status LEDs for all power supplies as well as a Fault LED are included for user feedback.

The C2000 launchpad (LAUNCHXL-F280049C) is required for this kit and is used to control the DRV8300 as well as monitor and report faults.

Features
  • 6 - 100V Operation, 30A peak H-Bridge ouput current
  • On-board CSAs for three-phase low-side current measurement
  • On-board buck for GVDD generation and device internal bootstrap diodes
  • Supply LEDs, Fault LEDs, and temperature sensor for user feedback
  • C2000 (LAUNCHXL-F280049C) sensored trapezoidal firmware available
BLDC drivers
DRV8300 — 100-V max simple 3-phase gate driver with bootstrap diodes DRV8300U — 100-V max, simple three-phase gate driver with bootstrap diodes and enhanced UVLO protection
Download View video with transcript Video

Order & start development

Evaluation board

DRV8300DIPW-EVM — DRV8300DIPW evaluation module for three-phase BLDC

Log in to order
lock Log in to view inventory
In stock / Out of stock
Limit:
Not available on TI.com
GUI for evaluation module (EVM)

DRV8300-EVM-GUI — DRV8300 evaluation module Graphical User Interface

Evaluate in the cloud
Firmware

DRV8300EVM-SENSORED-TRAP-FW — DRV8300EVM sensored trapezoidal firmware for Code Composer Studio™ IDE

Supported products & hardware
Download options

DRV8300EVM-SENSORED-TRAP-FW — DRV8300EVM sensored trapezoidal firmware for Code Composer Studio™ IDE

close
Latest version
Version: 1.0.0
Release date: 30 Jun 2023
open-in-new View all versions
download DRV8300EVM_Sensored_Trapezoidal_Firmware.zip  — 463 K

Checksum
Hardware development
Evaluation board
DRV8300DIPW-EVM — DRV8300DIPW evaluation module for three-phase BLDC DRV8300DRGE-EVM — DRV8300DRGE three phase BLDC evaluation module DRV8300DPW-Q1EVM — DRV8300DPW-Q1 evaluation module for three-phase BLDC gate driver

Documentation

open-in-new DRV8300_Trapezoidal_Control_Firmware_1.0.0_manifest.html

Release Infomation

CCS sensored trapezoidal firmware for BLDC motor control with the DRV8300EVM.
Getting started

MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications

Supported products & hardware
Get started
Download options

MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications

close
Latest version
Version: 2.3.0
Release date: 29 Nov 2024
open-in-new View all versions
Get started
download Universal FOC Motor Control Firmware (MSPM0Gx5xx)  — 0 K

Universal FOC Motor Control Library

Checksum
download PMSM Sensorless FOC Firmware (MSPM0Gx5xx)  — 0 K

Sensorless FOC firmware for MSPM0Gx5xx + Motor Driver solutions

download PMSM HALL Sensored FOC Firmware (MSPM0Gx5xx)  — 0 K

Hall Sensor Based FOC firmware for MSPM0Gx5xx + Motor Driver solutions

download BLDC Sensored Trap Firmware (MSPM0G)  — 0 K

BLDC sensored trap firmware for MSPM0G + DRV83xx motor drivers

download BLDC Sensored Trap Firmware (MSPM0L)  — 0 K

BLDC sensored trap firmware for MSPM0L + DRV83xx motor drivers

download Stepper Firmware (MSPM0L)  — 0 K

Stepper motor firmware for MSPM0L + DRV8xxx motor drivers

download Brushed-DC Firmware (MSPM0L)  — 0 K

Brushed-DC firmware for MSPM0L + DRV8xxx motor drivers
Products
Arm Cortex-M0+ MCUs
MSPM0G1105 — 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2×12bit 4Msps ADC, op-amp MSPM0G1106 — 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp MSPM0G1107 — 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp MSPM0G1505 — 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHACL MSPM0G1506 — 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHACL MSPM0G1507 — 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x4Msps ADC, 12-bit DAC, 3xCOMP, 2xOPA, MATHAC MSPM0G3105 — 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3105-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3106 — 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3106-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3107 — 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x12-bit 4Msps ADC, op-amp, CAN-FD MSPM0G3107-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2×12bit 4Msps ADC, op-amp, CAN-FD MSPM0G3505 — 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MAT MSPM0G3505-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 32KB flash 16KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHACL MSPM0G3506 — 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHAC MSPM0G3506-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 64KB flash 32KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHACL MSPM0G3507 — 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHA MSPM0G3507-Q1 — Automotive 80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM ADC, DAC, COMP, OPA, CAN-FD, MATHAC MSPM0L1303 — 32-MHz Arm® Cortex®-M0+ MCU with 8-KB flash, 2-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1304 — 32-MHz Arm® Cortex®-M0+ MCU with 16-KB flash, 2-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1304-Q1 — Automotive 32-Mhz Arm® Cortex®-M0+ with 16-KB flash, 2-KB RAM, 12-bit ADC,OPA, LIN MSPM0L1305 — 32-MHz Arm® Cortex®-M0+ MCU with 32-KB flash, 4-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1305-Q1 — Automotive 32-Mhz Arm® Cortex®-M0+ with 32-KB flash, 4-KB RAM, 12-bit ADC, OPA, LIN MSPM0L1306 — 32-MHz Arm® Cortex®-M0+ MCU with 64-KB flash, 4-KB SRAM, 12-bit ADC, comparator, OPA MSPM0L1306-Q1 — Automotive 32-Mhz Arm® Cortex®-M0+ with 64-KB flash, 4-KB RAM, 12-bit ADC, OPA,LIN MSPM0L1343 — 32-MHz Arm® Cortex®-M0+ MCU with 8-KB flash, 2-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1344 — 32-MHz Arm® Cortex®-M0+ MCU with 16-KB flash, 2-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1345 — 32-MHz Arm® Cortex®-M0+ MCU with 32-KB flash, 4-KB SRAM, 12-bit ADC, comparator, TIA MSPM0L1346 — 32-MHz Arm® Cortex®-M0+ MCU with 64-KB flash, 4-KB SRAM, 12-bit ADC, comparator, TIA
Brushed DC (BDC) motor drivers
DRV8706-Q1 — Automotive 40-V H-bridge smart gate driver with offline diagnostics & inline current sense am
Hardware development
Evaluation board
BOOSTXL-DRV8323RH — DRV8323RH Three-Phase Smart Gate Driver With Buck, Shunt Amps (Hardware Interface) Evaluation Module BOOSTXL-DRV8323RS — DRV8323RS three-phase smart gate driver with buck, shunt amps (SPI interface) evaluation module DRV8300DIPW-EVM — DRV8300DIPW evaluation module for three-phase BLDC DRV8300DRGE-EVM — DRV8300DRGE three phase BLDC evaluation module DRV8311HEVM — DRV8311H three-phase PWM motor driver evaluation module DRV8316REVM — DRV8316R three-phase PWM motor driver evaluation module DRV8317HEVM — DRV8317 evaluation module for three-phase brushless DC (BLDC) gate driver DRV8328AEVM — DRV8328A three-phase PWM motor driver evaluation module DRV8329AEVM — DRV8329A evaluation module for three-phase BLDC gate driver DRV8353RH-EVM — DRV8353RH evaluation module, three-phase brushless DC smart gate driver DRV8353RS-EVM — DRV8353RS evaluation module, three-phase brushless DC smart gate driver  DRV8411AEVM — DRV8411A evaluation module for dual H-bridge motor driver with current regulation DRV8706S-Q1EVM — Automotive H-bridge smart gate driver EVM with wide common mode current sense amplifier DRV8889-Q1EVM — DRV8889-Q1 automotive stepper driver with 1/256 microstepping and stall detection evaluation module LP-MSPM0G3507 — MSPM0G3507 LaunchPad™ development kit for 80-MHz Arm® Cortex®-M0+ MCU LP-MSPM0G3519 — MSPM0G3519 LaunchPad™ development kit for 80MHz Arm® Cortex®-M0+ MCU LP-MSPM0L1306 — MSPM0L1306 LaunchPad™ development kit for 32-MHz Arm® Cortex®-M0+ MCU

Documentation

open-in-new MSPM0 Motor Control Application Note

MSPM0 Motor Control Application Note

open-in-new Universal FOC Motor Control Tuning Guide

Application Tuning Guide to spin BLDC motors with Universal FOC Motor Control Library

open-in-new MSPM0 Universal FOC Motor Control Documentation

Getting started and Hardware Setup user guides for Universal FOC Motor Control Library

open-in-new MSPM0 Sensorless FOC Tuning Guide

Tuning Guide for MSPM0 based Sensorless FOC

open-in-new MSPM0 PMSM Sensorless FOC Documentation

MSPM0 BLDC Sensorless FOC Documentation

open-in-new MSPM0 Hall Sensored FOC Tuning Guide

Application Tuning Guide for MSPM0 Based Hall Sensor FOC

open-in-new MSPM0 Sensored FOC Documentation

Getting started and Hardware Setup user guides for Sensored FOC Motor Control Library

open-in-new MSPM0 BLDC Sensored Trap Control Documentation

MSPM0 BLDC Sensored Trap Control Documentation

open-in-new MSPM0 Stepper Motor Control Documentation

MSPM0 Stepper Motor Control Documentation

open-in-new MSPM0 Brushed Motor Control Documentation

MSPM0 Brushed Motor Control Documentation

open-in-new MSPM0_SDK_2.03.00.xx_manifest

open-in-new MSPM0-UNIVERSAL-FOC-SW_1.00.00_manifest

open-in-new MSPM0-SENSORLESS-FOC-SW_2.03.00.00_manifest

open-in-new MSPM0-HALL-SENSORED-FOC-SW_1.01.00.00_manifest

Release Infomation

MSP Motor Control is a collection of software, tools, and examples to spin motors in 30 minutes or less with MSPM0 Arm Cortex M0+ MCUs and popular motor driver solutions. 

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and 3-phase motors with sensored and sensorless control algorithms optimized for performance, integration, and ease-of-use. Spin your motor today by ordering hardware, connecting a motor, and using our Graphical User Interfaces or online code examples.

MSP Motor Control includes:

  • Complete software and evaluation ecosystem for MSPM0 MCU motor control applications inside MSPM0-SDK
  • Support for brushed, stepper, and 3-phase motors with sensored and sensorless algorithms using MSPM0L/MSPM0G devices
  • Getting started collateral to spin a motor in 30 minutes or less optimized for efficiency, power delivery, or speed/torque control 
  • Solutions for field-oriented control (FOC) with a comprehensive suite of features optimized for motor performance
  • Hardware support for reference designs, MSPM0 LaunchPads and TI's portfolio of DRV8xxx motor drivers
  • Future support for code-free GUI-based motor control, communication interfaces, and automatic tuning

 

What's new

  • Open Source Field Oriented Control v1.0.0. - Open Source FOC with ESMO and Finite BEMF Estimator.
  • Support for BLDC & PMSM motors in Three Shunt, Two Shunt and Single Shunt Configurations
  • Initial Speed detection and Initial Position detection feature support
  • Configurable Start up and Stop options to meet wide range of application needs.
  • Maximum Torque Per Ampere algorithm for efficiently driving Salient PMSM Motors
  • Field Weakening to spin the motors beyond the Rated Speeds.
  • Sensorless FOC PMSM Motor Control Library V2.03.00 : Bug Fixes and Improvements
  • Added Support for Single Shunt IPD & 16Khz FOC Execution rate
  • Sensored FOC PMSM Motor Control Library V1.0.0 : Bug Fixes and Improvements. Added Support for 16KHz FOC Execution rate.
TI's Standard Terms and Conditions for Evaluation Items apply.

Design files

download DRV8300DIPW-EVM Hardware Files
SLVC817.ZIP (13647 KB)

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* EVM User's guide DRV8300xxx-EVM User’s Guide PDF | HTML 09 Apr 2020
Certificate DRV8300DIPW-EVM EU RoHS Declaration of Conformity (DoC) 23 Dec 2020

Related design resources

Hardware development

EVALUATION BOARD
DRV8300DRGE-EVM — DRV8300DRGE three phase BLDC evaluation module LAUNCHXL-F280049C — F280049C LaunchPad™ development kit C2000™ Piccolo™ MCU

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos