SLUAAY2 December   2024 ISO5451 , ISO5451-Q1 , ISO5452 , ISO5452-Q1 , ISO5851 , ISO5851-Q1 , ISO5852S , ISO5852S-EP , ISO5852S-Q1 , UCC21710 , UCC21710-Q1 , UCC21717-Q1 , UCC21732 , UCC21732-Q1 , UCC21736-Q1 , UCC21737-Q1 , UCC21738-Q1 , UCC21739-Q1 , UCC21750 , UCC21750-Q1 , UCC21755-Q1 , UCC21756-Q1 , UCC21759-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1 Introduction
  5. 2 SiC and IGBT Characteristics
  6. 3 Failure Modes
  7. 4 Short-Circuit Protection Approaches
    1. 4.1 Short-Circuit Current-Based Protection Implementation
    2. 4.2 Short Circuit Voltage-Based Protection Implementation
  8. 5 DESAT Circuitry Design
    1. 5.1 DESAT Circuit Component Selection
    2. 5.2 Effect of Parasitic Elements
    3. 5.3 Effect of Rlim on DESAT Noise
  9. 6 Safe Shutdown
    1. 6.1 Safe Shutdown Mechanisms
    2. 6.2 Safe Shutdown Considerations
  10. 7 Short-Circuit Test Setup and Data
    1. 7.1 Short-Circuit Bench Measurement Setup
    2. 7.2 SC Board Setup for Data Collection
    3. 7.3 Different Circuit Configurations for SC Testing
    4. 7.4 Bench Measurement Results
    5. 7.5 Overall Summary of SiC vs IGBT Power Module SC Observation
  11. 8 Key Consideration in Designing SC Protection Circuit
  12. 9 Summary
  13. 10References

1 Introduction

Isolated gate drivers are commonly used in automotive and industrial high-power systems such as HEV/EV traction inverters, solar inverters, and motor drives. In these applications, silicon carbide (SiC) MOSFETs and Si IGBTs are usually ideal candidates; their abilities to handle high voltage, high current are beneficial in high power systems in the hundreds of kW range. All the high-power applications use power modules with increased voltage and current capability.

UCC21750Q1 Power Switch Types With Different System Power Levels Figure 1-1 Power Switch Types With Different System Power Levels

This application note talks about some of the common failure modes of the SiC and IGBT power switches, characteristics, the best suitable protection approach based on the power module type and the protection circuit component design aspects.