Home Sensors Magnetic sensors Multi-axis linear & angle position sensors
Home
Sensors
Magnetic sensors
Multi-axis linear & angle position sensors

TMAG5173-Q1

ACTIVE

Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface

Order now
Data sheet

TMAG5173-Q1

ACTIVE
Data sheet Order now

Product details

Type 3-Axis linear Interface type I2C Sample rate (ksps) 20 Supply voltage (min) (V) 2.3 Supply voltage (max) (V) 3.6 Rating Automotive TI functional safety category Functional Safety-Compliant Operating temperature range (°C) -40 to 125
Type 3-Axis linear Interface type I2C Sample rate (ksps) 20 Supply voltage (min) (V) 2.3 Supply voltage (max) (V) 3.6 Rating Automotive TI functional safety category Functional Safety-Compliant Operating temperature range (°C) -40 to 125
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • High-precision linear 3D Hall-effect sensor to optimize position sensing speed and accuracy:
    • Sensitivity room temperature error, X, Y, Z axes: ±2.5% (maximum)
    • Sensitivity mismatch temperature drift X-Y axes: ±2% (maximum)
    • X-Y angle measurement room temperature error: ±1.1° (maximum)
    • X-Y angle measurement temperature drift: ±1.2° (maximum)
    • 20 kSPS conversion rate for single axis
  • Functional Safety-Compliant:
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C
  • Ultra-low power saving mode:
    • 8 nA (typical) sleep mode current
  • Selectable linear magnetic range at X, Y, or Z axis:
    • TMAG5173x1-Q1: ±40 mT, ±80 mT
    • TMAG5173x2-Q1: ±133 mT, ±266 mT
  • Interrupt signal from user-defined magnetic and temperature threshold cross
  • Configurable unipolar and omnipolar switch function
  • Integrated angle CORDIC calculation with gain and offset adjustment
  • Configurable averaging filter for noise reduction
  • I2C interface with cyclic redundancy check (CRC):
    • Maximum 1 MHz I2C clock speed
  • Conversion trigger by I2C or dedicated INT pin
  • Integrated temperature compensation for multiple magnet types
  • Built-in temperature sensor
  • 2.3 V to 3.6 V supply range
  • I2C and INT pin tolerance: 5.5 V (maximum)
  • High-precision linear 3D Hall-effect sensor to optimize position sensing speed and accuracy:
    • Sensitivity room temperature error, X, Y, Z axes: ±2.5% (maximum)
    • Sensitivity mismatch temperature drift X-Y axes: ±2% (maximum)
    • X-Y angle measurement room temperature error: ±1.1° (maximum)
    • X-Y angle measurement temperature drift: ±1.2° (maximum)
    • 20 kSPS conversion rate for single axis
  • Functional Safety-Compliant:
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C
  • Ultra-low power saving mode:
    • 8 nA (typical) sleep mode current
  • Selectable linear magnetic range at X, Y, or Z axis:
    • TMAG5173x1-Q1: ±40 mT, ±80 mT
    • TMAG5173x2-Q1: ±133 mT, ±266 mT
  • Interrupt signal from user-defined magnetic and temperature threshold cross
  • Configurable unipolar and omnipolar switch function
  • Integrated angle CORDIC calculation with gain and offset adjustment
  • Configurable averaging filter for noise reduction
  • I2C interface with cyclic redundancy check (CRC):
    • Maximum 1 MHz I2C clock speed
  • Conversion trigger by I2C or dedicated INT pin
  • Integrated temperature compensation for multiple magnet types
  • Built-in temperature sensor
  • 2.3 V to 3.6 V supply range
  • I2C and INT pin tolerance: 5.5 V (maximum)

The TMAG5173-Q1 is a low-power linear 3D Hall-effect sensor designed for a wide range of automotive and industrial applications. This device integrates three independent Hall-effect sensors in the X, Y, and Z axes. A precision analog signal-chain supports applications requiring narrow design tolerance. Integrated safety mechanisms enable robust functional safe system design. The device is suitable for 1D linear measurements, 2D angle measurements, 3D joystick measurements, magnetic threshold cross detection, and various user configurable switch function applications. The digital filter option allows up to 32 times sensor data integration for improved noise performance. The I2C interface, while supporting multiple operating VCC ranges, ensures seamless data communication with microcontrollers. The device has an integrated temperature sensor available for multiple system functions, such as thermal budget check or temperature compensation calculation for a given magnetic field.

The TMAG5173-Q1 supports multiple operating modes to optimize the system power consumptions and operating speed. During the active mode the device performs continuous conversions autonomously. During standby mode the INT pin or I2C communication can be used by a microcontroller to trigger a new conversion. During the sleep mode the device consumes ultra-low power and retains the configuration register values.

An integrated angle calculation engine (CORDIC) provides full 360° angular position information for both on-axis and off-axis topologies with an angle resolution of 1/16 degree. The angle calculation is performed for any of the X-Y, Y-Z, or Z-X planes based off the user configuration register selection. The device features magnetic gain and offset correction to mitigate the impact of system mechanical error sources.

The TMAG5173-Q1 can be configured through the user registers to enable any combination of magnetic axes and temperature channel conversions. The device supports several I2C read frames along with cyclic redundancy check and diagnostic status communications.

The TMAG5173-Q1 is offered in four different factory-programmed I2C addresses. The device also supports additional I2C addresses through the modification of a user-configurable I2C address register. Each orderable part can be configured to select one of two magnetic field ranges that suits the magnet strength and component placement during system calibration.

The device performs consistently across a wide ambient temperature range of –40°C to +125°C.

The TMAG5173-Q1 is a low-power linear 3D Hall-effect sensor designed for a wide range of automotive and industrial applications. This device integrates three independent Hall-effect sensors in the X, Y, and Z axes. A precision analog signal-chain supports applications requiring narrow design tolerance. Integrated safety mechanisms enable robust functional safe system design. The device is suitable for 1D linear measurements, 2D angle measurements, 3D joystick measurements, magnetic threshold cross detection, and various user configurable switch function applications. The digital filter option allows up to 32 times sensor data integration for improved noise performance. The I2C interface, while supporting multiple operating VCC ranges, ensures seamless data communication with microcontrollers. The device has an integrated temperature sensor available for multiple system functions, such as thermal budget check or temperature compensation calculation for a given magnetic field.

The TMAG5173-Q1 supports multiple operating modes to optimize the system power consumptions and operating speed. During the active mode the device performs continuous conversions autonomously. During standby mode the INT pin or I2C communication can be used by a microcontroller to trigger a new conversion. During the sleep mode the device consumes ultra-low power and retains the configuration register values.

An integrated angle calculation engine (CORDIC) provides full 360° angular position information for both on-axis and off-axis topologies with an angle resolution of 1/16 degree. The angle calculation is performed for any of the X-Y, Y-Z, or Z-X planes based off the user configuration register selection. The device features magnetic gain and offset correction to mitigate the impact of system mechanical error sources.

The TMAG5173-Q1 can be configured through the user registers to enable any combination of magnetic axes and temperature channel conversions. The device supports several I2C read frames along with cyclic redundancy check and diagnostic status communications.

The TMAG5173-Q1 is offered in four different factory-programmed I2C addresses. The device also supports additional I2C addresses through the modification of a user-configurable I2C address register. Each orderable part can be configured to select one of two magnetic field ranges that suits the magnet strength and component placement during system calibration.

The device performs consistently across a wide ambient temperature range of –40°C to +125°C.
filter Find other Multi-axis linear & angle position sensors
Download View video with transcript Video
Request more information

Functional safety documentation is available. Request now

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TMAG5273 ACTIVE Low-power linear 3D Hall-effect sensor with I²C interface Pin-to-pin equivalent device with lower performance for industrial applications
Same functionality with different pin-out to the compared device
TMAG5170-Q1 ACTIVE Automotive, high-precision linear 3D Hall-effect sensor with serial peripheral interface Similar device with SPI interface and higher performance

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 31
Type Title Date
* Data sheet TMAG5173-Q1 High-Precision 3D Hall-Effect Sensor With I2 C Interface datasheet (Rev. A) PDF | HTML 19 Sep 2023
Application brief Absolute Angle Measurements for Rotational Motion Using Hall-Effect Sensors (Rev. B) PDF | HTML 24 May 2024
Application note Linear Hall-Effect Sensor Array Design (Rev. B) PDF | HTML 24 May 2024
Application brief Measuring 3D Motion With Absolute Position Sensors (Rev. B) PDF | HTML 23 May 2024
Application brief Head-on Linear Displacement Sensing Using Hall-Effect Sensors (Rev. A) PDF | HTML 22 May 2024
Application brief Multi-mover Position Sensing With Linear Motor Transport Systems (Rev. A) PDF | HTML 21 May 2024
User guide TMAG5170 Slide-By Attachment (Rev. A) PDF | HTML 21 May 2024
Application brief Tracking Slide-By Displacement With Linear Hall-Effect Sensors (Rev. B) PDF | HTML 21 May 2024
Application note Magnet Selection for Linear Position Applications (Rev. B) PDF | HTML 14 May 2024
Application note Gear-Tooth Detection With Back-Biased 3D Hall-Effect Sensors PDF | HTML 29 Apr 2024
Product overview Introduction to Hall-Effect Sensors (Rev. B) PDF | HTML 25 Apr 2024
Application note Automotive Door Handle Design with Position Sensors PDF | HTML 10 Apr 2024
White paper How Position Sensors Enable Innovation in Automotive and Industrial Applications (Rev. A) PDF | HTML 08 Mar 2024
EVM User's guide TMAG5x73 Evaluation Modules (Rev. D) PDF | HTML 13 Feb 2024
User guide Joystick and Lever Design With Hall-Effect Sensors (Rev. A) PDF | HTML 21 Dec 2023
Application brief Introduction to TI Magnetic Sense Simulator Features PDF | HTML 05 Dec 2023
User guide Texas Instruments' Magnetic Sense Simulator User's Guide PDF | HTML 04 Dec 2023
White paper 정확한 감지를 통해 시스템 성능을 개선하고 효율성을 높이는 방법 (Rev. C) PDF | HTML 30 Oct 2023
White paper How Accurate Sensing Enables Better System Performance and Increased Efficiency (Rev. C) PDF | HTML 22 Oct 2023
Application brief Angle Calculation Methods Using Position Sensor Output Data (Rev. A) PDF | HTML 19 May 2023
Application note Capacitive, Inductive, and Hall Sensing for HMI in Automotive Applications (Rev. A) PDF | HTML 09 May 2023
Application brief Hall-Effect Sensors for Steering Column Control (Rev. A) PDF | HTML 08 May 2023
White paper Using Hall-Effect Sensors For Contactless Rotary Encoding and Knob Applications (Rev. A) PDF | HTML 01 May 2023
Application note Angle Measurement With Multi-Axis Hall-Effect Sensors (Rev. A) PDF | HTML 30 Apr 2023
Application note Achieving Highest System Angle Sensing Accuracy (Rev. A) PDF | HTML 19 Apr 2023
Application brief Using Hall-Effect and Inductive Sensors in Automotive HMI Applications PDF | HTML 10 Oct 2022
Certificate TMAG5173EVM EU RoHS Declaration of Conformity (DoC) 20 May 2022
Application note Achieving Highest System Angle Sensing Accuracy PDF | HTML 29 Mar 2022
White paper Improve System Performance With Linear 3D Hall-Effect Position Sensors PDF | HTML 24 Sep 2021
User guide TMAG5170 Joystick Attachment Assembly Guide (Rev. A) PDF | HTML 22 Jul 2021
User guide TMAG5170 Orbital Attachment (Rev. A) PDF | HTML 19 Jul 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LDC-HALL-HMI-EVM — Evaluation module for inductive touch and magnetic dial contactless user-interface design

This evaluation module (EVM) uses inductive and Hall-effect sensing technologies to provide a human-machine interface. The inductive sensing devices create eight different touch buttons on a seamless surface while the Hall-effect sensor is used to create a magnetic dial that can rotate and be used (...)
User guide: PDF | HTML
Not available on TI.com
Evaluation board

TMAG5173EVM — TMAG5173-Q1 evaluation module for automotive, high-precision, linear 3D Hall-effect sensor with I²C

The TMAG5173EVM is an easy-to-use platform to evaluate the main features and performance of the TMAG5173-Q1 device, which is a linear 3D Hall-effect sensor. The evaluation module (EVM) includes one magnet and a TMAG5173-Q1 daughter board. The EVM works with a sensor controller board, TI-SCB (sold (...)
User guide: PDF | HTML
Not available on TI.com
Firmware

TMAG5X73-CODE-EXAMPLE — TMAG5273 and TMAG5173-Q1 code example

Supported products & hardware

Supported products & hardware

Products
Multi-axis linear & angle position sensors
TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface
Hardware development
Evaluation board
TMAG5273EVM — TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface TMAG5173EVM — TMAG5173-Q1 evaluation module for automotive, high-precision, linear 3D Hall-effect sensor with I²C
Download options
GUI for evaluation module (EVM)

TMAG5X73EVM-GUI — TMAG5173EVM and TMAG5273EVM GUI

TMAG5x73EVM GUI will allow users to measure and plot the magnetic fields sensed by the device
Supported products & hardware

Supported products & hardware

Products
Multi-axis linear & angle position sensors
TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface
Hardware development
Evaluation board
TMAG5273EVM — TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface TMAG5173EVM — TMAG5173-Q1 evaluation module for automotive, high-precision, linear 3D Hall-effect sensor with I²C
Launch Download options
Support software

SBAC295 — TMAG5173EVM and TMAG5273EVM BSL Batch File

Provides an executable that can be used by customers to flash their TI-SCB with the firmware needed to interface with the TMAG5x73EVM GUI
Supported products & hardware

Supported products & hardware

Products
Multi-axis linear & angle position sensors
TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface
Hardware development
Evaluation board
TMAG5273EVM — TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface TMAG5173EVM — TMAG5173-Q1 evaluation module for automotive, high-precision, linear 3D Hall-effect sensor with I²C
Download options
Calculation tool

HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool

HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.

Supported products & hardware

Supported products & hardware

Products
Multi-axis linear & angle position sensors
TMAG5170 — High-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5170-Q1 — Automotive, high-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface
Linear Hall-effect sensors
DRV5053 — High voltage (up to 38V), linear hall effect sensor DRV5053-Q1 — Automotive, high voltage (up to 38V), linear hall effect sensor DRV5055 — Ratiometric linear hall effect sensor with analog output DRV5055-Q1 — Automotive, ratiometric linear Hall-effect sensor with analog output DRV5056 — Ratiometric unipolar linear hall effect sensor with analog output DRV5056-Q1 — Automotive, ratiometric unipolar linear hall effect sensor with analog output DRV5057 — Linear hall effect sensor with digital PWM output DRV5057-Q1 — Automotive linear hall effect sensor with digital PWM output
Hall-effect latches & switches
DRV5011 — Small size (available in WCSP and X2SON), low voltage (up to 5.5-V) Hall effect latch DRV5012 — Low power (as low as 3.3-µA), low voltage (up to 5.5-V) Hall effect latch DRV5013 — High voltage (up to 38V), high bandwidth (30kHz) Hall-effect latch DRV5013-Q1 — Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch DRV5015 — High sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5015-Q1 — Automotive, high sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5021 — Low voltage (up to 5.5V), high bandwidth (up to 30 kHz) unipolar switch DRV5021-Q1 — Automotive 2.5-V to 5.5-V Hall effect unipolar switch DRV5023 — High voltage (up to 38V), high bandwidth (up to 30 kHz) unipolar switch DRV5023-Q1 — Automotive 2.7V to 38V Hall Effect Unipolar Switch DRV5032 — Low-power (5Hz, <1µA) low-voltage (up to 5.5V) switch DRV5033 — High voltage (up to 38V), high bandwidth (up to 30 kHz) omnipolar switch DRV5033-Q1 — Automotive 2.7V to 38V Hall Effect Omnipolar Switch TMAG5110 — High-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5110-Q1 — Automotive, high-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5111 — High-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5111-Q1 — Automotive, high-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5123 — High-voltage (up to 38 V), in-plane, high-precision switch TMAG5123-Q1 — Automotive, in-plane, high-precision, high-voltage switch TMAG5124 — Two-wire (current output), high-voltage (up to 38 V), high-precision switch for remote sensing TMAG5131-Q1 — Automotive low-power (10 Hz, 1 µA) low-voltage (down to 1.65 V) Hall-effect switch TMAG5231 — Low-power, low-voltage (1.65 V to 5.5 V) Hall-effect switch TMAG5328 — Resistor-adjustable, low-power Hall-effect switch
Hardware development
Evaluation board
DRV5055-5057EVM — DRV5055, DRV5056 and DRV5057 linear Hall effect sensor evaluation module DRV5055EVM — DRV5055 evaluation module HALL-ADAPTER-EVM — Hall sensor breakout adapter evaluation module TMAG5170UEVM — TMAG5170 evaluation module
Software
Calculation tool
HALL-PROXIMITY-DESIGN — Magnetic sensing proximity tool
Download
Calculation tool

SBAR012 — Angle Error Calculator for Linear 3D Hall-effect Sensors

Angle Error Calculator for Linear 3D Hall-effect Sensors
Supported products & hardware

Supported products & hardware

Products
Multi-axis linear & angle position sensors
TMAG5170 — High-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5170-Q1 — Automotive, high-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface TMAG3001 — Three-axis linear Hall-effect sensor with I²C and programmable switch in wafer chip-scale package TMAG5170D-Q1 — Automotive, high-precision, 3D linear Hall-effect dual-die sensor with SPI interface
Download
Simulation tool

TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool

The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
Supported products & hardware

Supported products & hardware

Products
Hall-effect latches & switches
DRV5011 — Small size (available in WCSP and X2SON), low voltage (up to 5.5-V) Hall effect latch DRV5012 — Low power (as low as 3.3-µA), low voltage (up to 5.5-V) Hall effect latch DRV5013 — High voltage (up to 38V), high bandwidth (30kHz) Hall-effect latch DRV5013-Q1 — Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch DRV5015 — High sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5015-Q1 — Automotive, high sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5021 — Low voltage (up to 5.5V), high bandwidth (up to 30 kHz) unipolar switch DRV5021-Q1 — Automotive 2.5-V to 5.5-V Hall effect unipolar switch DRV5023 — High voltage (up to 38V), high bandwidth (up to 30 kHz) unipolar switch DRV5023-Q1 — Automotive 2.7V to 38V Hall Effect Unipolar Switch DRV5032 — Low-power (5Hz, <1µA) low-voltage (up to 5.5V) switch DRV5033 — High voltage (up to 38V), high bandwidth (up to 30 kHz) omnipolar switch DRV5033-Q1 — Automotive 2.7V to 38V Hall Effect Omnipolar Switch TMAG5110 — High-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5110-Q1 — Automotive, high-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5111 — High-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5111-Q1 — Automotive, high-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5115 — High-speed Hall-effect latch with low jitter (fast response) TMAG5123 — High-voltage (up to 38 V), in-plane, high-precision switch TMAG5123-Q1 — Automotive, in-plane, high-precision, high-voltage switch TMAG5124 — Two-wire (current output), high-voltage (up to 38 V), high-precision switch for remote sensing TMAG5124-Q1 — Automotive 2-wire high-voltage (up to 38 V), high-precision switch TMAG5131-Q1 — Automotive low-power (10 Hz, 1 µA) low-voltage (down to 1.65 V) Hall-effect switch TMAG5213 — High-bandwidth (30-kHz), high-voltage (26 V) Hall-effect latch for low-cost applications TMAG5231 — Low-power, low-voltage (1.65 V to 5.5 V) Hall-effect switch TMAG5233 — In-plane (X-axis) Hall-effect switch TMAG5328 — Resistor-adjustable, low-power Hall-effect switch
Linear Hall-effect sensors
DRV5053 — High voltage (up to 38V), linear hall effect sensor DRV5053-Q1 — Automotive, high voltage (up to 38V), linear hall effect sensor DRV5055 — Ratiometric linear hall effect sensor with analog output DRV5055-Q1 — Automotive, ratiometric linear Hall-effect sensor with analog output DRV5056 — Ratiometric unipolar linear hall effect sensor with analog output DRV5056-Q1 — Automotive, ratiometric unipolar linear hall effect sensor with analog output DRV5057 — Linear hall effect sensor with digital PWM output DRV5057-Q1 — Automotive linear hall effect sensor with digital PWM output TMAG5253 — Low-power linear Hall-effect sensor with enable pin in ultrasmall X2SON package
Multi-axis linear & angle position sensors
TMAG3001 — Three-axis linear Hall-effect sensor with I²C and programmable switch in wafer chip-scale package TMAG5170 — High-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5170-Q1 — Automotive, high-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5170D-Q1 — Automotive, high-precision, 3D linear Hall-effect dual-die sensor with SPI interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface TMAG6180-Q1 — Automotive high-precision analog AMR angle sensor with 360° angle range TMAG6181-Q1 — Automotive high-precision analog AMR angle sensor with integrated turns counter
Hardware development
Evaluation board
DRV5011-5012EVM — DRV5011 and DRV5012 Ultra-Low Power, Digital-Latch Hall Effect Sensor Evaluation Module DRV5032-SOLAR-EVM — DRV5032 Ultra-Low Power, 1.65V to 5.5V Hall Effect Switch Sensor Evaluation Module DRV5055-5057EVM — DRV5055, DRV5056 and DRV5057 linear Hall effect sensor evaluation module DRV5055-ANGLE-EVM — DRV5055 angle evaluation module DRV5055EVM — DRV5055 evaluation module HALL-ADAPTER-EVM — Hall sensor breakout adapter evaluation module HALL-HINGE-EVM — TMAG5231 evaluation module for Hall-effect hinge HALL-HMI-ROCKER-EVM — Evaluation module for human machine interface (HMI) rocker switch using Hall-effect switches HALL-TRIGGER-EVM — Evaluation module for contactless, Hall-effect variable-speed trigger with external field protection LDC-HALL-HMI-EVM — Evaluation module for inductive touch and magnetic dial contactless user-interface design TMAG3001EVM — TMAG3001 evaluation module for three-axis linear Hall-effect sensor with I²C and programmable switch TMAG5110-5111EVM — TMAG511x evaluation module for high-sensitivity, 2D, dual-channel, Hall-effect latches TMAG5115EVM — TMAG5115 evaluation module for high-sensitivity low-jitter high-voltage Hall-effect latches TMAG5123EVM — TMAG5123 in-plane high-precision Hall effect switch evaluation module TMAG5124EVM — TMAG5124 2-wire Hall-effect switch evaluation module TMAG5170DEVM — TMAG5170DEVM evaluation module for high-precision 3D linear Hall-effect dual-die sensor TMAG5170UEVM — TMAG5170 evaluation module TMAG5173EVM — TMAG5173-Q1 evaluation module for automotive, high-precision, linear 3D Hall-effect sensor with I²C TMAG5233EVM — TMAG5233 evaluation module TMAG5253EVM — TMAG5253 evaluation module for low-power linear Hall-effect sensor TMAG5273EVM — TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch TMAG6180-6181EVM — TMAG6180 and TMAG6181 evaluation module with differential sine and cosine analog outputs
Software
Calculation tool
HALL-PROXIMITY-DESIGN — Magnetic sensing proximity tool
Launch Download
Package Pins CAD symbols, footprints & 3D models
SOT-23 (DBV) 6 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos