Startseite Motortreiber Magnettreiber
Startseite
Motortreiber
Magnettreiber
NEU

DRV81620-Q1

VORSCHAU

40 V 6-kanaliger konfigurierbarer 2-kanaliger Highside-Treiber für die Automobilindustrie mit Notlau

Jetzt bestellen
Datenblatt

DRV81620-Q1

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Control interface SPI Control mode PWM Features Limp home, Open-Load Detection, Paralleling of outputs, Reverse Battery Protection Iout/ch (max) (A) 0.33 Number of channels 8 RDS(on) (Ω) 1 Sleep current (mA) 0.005 Vs (max) (V) 40 Vs (min) (V) 3 Operating temperature range (°C) -40 to 125 Rating Automotive
Control interface SPI Control mode PWM Features Limp home, Open-Load Detection, Paralleling of outputs, Reverse Battery Protection Iout/ch (max) (A) 0.33 Number of channels 8 RDS(on) (Ω) 1 Sleep current (mA) 0.005 Vs (max) (V) 40 Vs (min) (V) 3 Operating temperature range (°C) -40 to 125 Rating Automotive
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4

  • 3V to 40V Analog supply voltage

    • Cranking capability down to 3V

    • Supports LV124 standard

  • 3V to 5.5V Digital supply voltage

    • Compatible with 3.3V and 5V microcontrollers

  • 44V minimum drain to source clamping voltage

  • -19V maximum source to ground clamping voltage

  • RDS(ON): 630mΩ typical at 12V, 25 °C
  • Current: 330mA per output at 85 °C, with all channels ON
  • 2 parallel inputs with mapping functionality
  • Fail-safe activation in Limp Home mode
    • Using nSLEEP and IN pins
  • Two independent internal PWM generators
  • Bulb Inrush Mode (BIM) to drive lamps
    • For 2W/5W lamps and other capacitive loads
  • Low-current sleep mode
    • < 6.5µA using nSLEEP pin
  • 16-bit SPI interface for control and diagnosis
    • Daisy Chain capability
    • Compatible with 8-bit SPI devices
  • Supports various protection features -
    • Reverse battery protection
    • Short circuit to ground and battery protection
    • Stable behavior at under voltage conditions
    • Over Current latch OFF
    • Overtemperature warning
    • Thermal shutdown latch OFF
    • Overvoltage protection
    • Loss of battery and loss of ground protection
    • Electrostatic discharge (ESD) protection
  • Supports several diagnostic features -
    • Diagnostic information via SPI register
    • Over Load detection at ON state
    • Open Load detection in ON and OFF state
    • Input and Output Status Monitor

  • 3V to 40V Analog supply voltage

    • Cranking capability down to 3V

    • Supports LV124 standard

  • 3V to 5.5V Digital supply voltage

    • Compatible with 3.3V and 5V microcontrollers

  • 44V minimum drain to source clamping voltage

  • -19V maximum source to ground clamping voltage

  • RDS(ON): 630mΩ typical at 12V, 25 °C
  • Current: 330mA per output at 85 °C, with all channels ON
  • 2 parallel inputs with mapping functionality
  • Fail-safe activation in Limp Home mode
    • Using nSLEEP and IN pins
  • Two independent internal PWM generators
  • Bulb Inrush Mode (BIM) to drive lamps
    • For 2W/5W lamps and other capacitive loads
  • Low-current sleep mode
    • < 6.5µA using nSLEEP pin
  • 16-bit SPI interface for control and diagnosis
    • Daisy Chain capability
    • Compatible with 8-bit SPI devices
  • Supports various protection features -
    • Reverse battery protection
    • Short circuit to ground and battery protection
    • Stable behavior at under voltage conditions
    • Over Current latch OFF
    • Overtemperature warning
    • Thermal shutdown latch OFF
    • Overvoltage protection
    • Loss of battery and loss of ground protection
    • Electrostatic discharge (ESD) protection
  • Supports several diagnostic features -
    • Diagnostic information via SPI register
    • Over Load detection at ON state
    • Open Load detection in ON and OFF state
    • Input and Output Status Monitor

The DRV81620-Q1 is an eight channel low-side and high-side switch with integrated protection and diagnostics. It is designed to control relays, LEDs, Lamps and motors in automotive and industrial applications.

A serial peripheral interface (SPI) with daisy chain capability is utilized for control and diagnosis of the loads as well as of the device. Two input pins with mapping functionality are available for direct control of the outputs. The device supports Limp Home mode for fail-safe activation. Integrated PWM generators enable driving LEDs, and bulb inrush mode enables driving loads with large capacitance.

The DRV81620-Q1 supports various protection features such as undervoltage, overvoltage, short circuit and open load detection. High level of integration with embedded protection and diagnostic features make the DRV81620-Q1 an ideal choice for automotive body and powertrain applications.

The DRV81620-Q1 is an eight channel low-side and high-side switch with integrated protection and diagnostics. It is designed to control relays, LEDs, Lamps and motors in automotive and industrial applications.

A serial peripheral interface (SPI) with daisy chain capability is utilized for control and diagnosis of the loads as well as of the device. Two input pins with mapping functionality are available for direct control of the outputs. The device supports Limp Home mode for fail-safe activation. Integrated PWM generators enable driving LEDs, and bulb inrush mode enables driving loads with large capacitance.

The DRV81620-Q1 supports various protection features such as undervoltage, overvoltage, short circuit and open load detection. High level of integration with embedded protection and diagnostic features make the DRV81620-Q1 an ideal choice for automotive body and powertrain applications.
filter Andere Magnettreiber suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet DRV81620-Q1 : 8-Channel Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control datasheet PDF | HTML 11 Sep 2024
EVM User's guide DRV81xxx-Q1 Evaluation Module User's Guide PDF | HTML 22 Jul 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DRV81620-Q1EVM — DRV81620-Q1 – Evaluierungsmodul

Das Evaluierungsmodul DRV81xxx-Q1 (EVM) ermöglicht die einfache Evaluierung der DRV81xxx-Q1-Bausteinfamilie. Das EVM wurde so programmiert und konfiguriert, dass es sofort einsatzbereit ist und sofort mit der Laststeuerung beginnen kann. Die Bausteinfamilie DRV81xxx–Q1 verfügt über mehrere (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP) 24 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos