DRV8935

AKTIV

33 V, 2,5 A unabhängige Vierfach-Halbbrückentreiber mit Stromregelung

Jetzt bestellen

Datenblatt

document-pdfAcrobat DRV8935 Quad Half-Bridge Driver With Integrated Current Sense datasheet (Rev. A) (Englisch) PDF | HTML

DRV8935

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of full bridges

2

Vs (min) (V)

4.5

Vs ABS (max) (V)

35

Peak output current (A)

2.5

RDS(ON) (HS + LS) (mΩ)

330

Sleep current (µA)

2

Control mode

PWM

Control interface

Hardware (GPIO)

Features

Integrated Current Sensing

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Number of full bridges

2

Vs (min) (V)

4.5

Vs ABS (max) (V)

35

Peak output current (A)

2.5

RDS(ON) (HS + LS) (mΩ)

330

Sleep current (µA)

2

Control mode

PWM

Control interface

Hardware (GPIO)

Features

Integrated Current Sensing

Rating

Catalog

Operating temperature range (°C)

-40 to 125

HTSSOP (PWP)

28

62.08 mm² 9.7 x 6.4

VQFN (RGE)

24

16 mm² 4 x 4

Quad Half-bridge driver
- Can drive up to Four Solenoid Loads, Two DC Motors, One Stepper Motor, or Other Loads
Integrated current sensing and regulation
4.5-V to 33-V Operating supply voltage range
Low R_DS(ON): 330 mΩ HS + LS at 24 V, 25°C
2.5-A Maximum Drive Current at 24 V, 25°C
Pin to pin compatible with -
- DRV8932: 33-V, 900 mΩ HS + LS
- DRV8955: 48-V, 330 mΩ HS + LS
- Small package and footprint
Configurable Off-Time PWM Chopping
- 7, 16, 24 or 32 µs
Supports 1.8-V, 3.3-V, 5.0-V logic inputs
Low-current sleep mode (2 µA)
Spread spectrum clocking for low electromagnetic interference (EMI)
Protection features
- VM undervoltage lockout (UVLO)
- Charge pump undervoltage (CPUV)
- Overcurrent protection (OCP)
- Thermal shutdown (OTSD)
- Fault condition output (nFAULT)]

Quad Half-bridge driver
- Can drive up to Four Solenoid Loads, Two DC Motors, One Stepper Motor, or Other Loads
Integrated current sensing and regulation
4.5-V to 33-V Operating supply voltage range
Low R_DS(ON): 330 mΩ HS + LS at 24 V, 25°C
2.5-A Maximum Drive Current at 24 V, 25°C
Pin to pin compatible with -
- DRV8932: 33-V, 900 mΩ HS + LS
- DRV8955: 48-V, 330 mΩ HS + LS
- Small package and footprint
Configurable Off-Time PWM Chopping
- 7, 16, 24 or 32 µs
Supports 1.8-V, 3.3-V, 5.0-V logic inputs
Low-current sleep mode (2 µA)
Spread spectrum clocking for low electromagnetic interference (EMI)
Protection features
- VM undervoltage lockout (UVLO)
- Charge pump undervoltage (CPUV)
- Overcurrent protection (OCP)
- Thermal shutdown (OTSD)
- Fault condition output (nFAULT)]

The DRV8935 provides four half-bridge drivers for industrial applications. The device can be used for driving up to four solenoid loads, two DC motors, one Stepper motor, or other loads. The output stage for each channel consists of N-channel power MOSFETs configured in a half bridge. A simple PWM interface allows easy interface with the controller.

The DRV8935 operates off a single power supply and supports a wide input supply range from 4.5 V to 33 V. The DRV8935 can supply up to 2.5-A peak or 1.75-A RMS output current per channel (dependent on PCB design).

A low-power sleep mode is provided to achieve a low quiescent current draw by shutting down much of the internal circuitry. Internal protection functions are provided for undervoltage-lockout, overcurrent protection on each FET, short circuit protection, and overtemperature. Fault conditions are indicated by the nFAULT pin.

The DRV8935 provides four half-bridge drivers for industrial applications. The device can be used for driving up to four solenoid loads, two DC motors, one Stepper motor, or other loads. The output stage for each channel consists of N-channel power MOSFETs configured in a half bridge. A simple PWM interface allows easy interface with the controller.

The DRV8935 operates off a single power supply and supports a wide input supply range from 4.5 V to 33 V. The DRV8935 can supply up to 2.5-A peak or 1.75-A RMS output current per channel (dependent on PCB design).

A low-power sleep mode is provided to achieve a low quiescent current draw by shutting down much of the internal circuitry. Internal protection functions are provided for undervoltage-lockout, overcurrent protection on each FET, short circuit protection, and overtemperature. Fault conditions are indicated by the nFAULT pin.

filter

Andere Treiber für Gleichstrom-Bürstenmotoren suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 6

	Typ	Titel		Datum
*	Data sheet	DRV8935 Quad Half-Bridge Driver With Integrated Current Sense datasheet (Rev. A)	PDF \| HTML	13 Apr 2021
	Application brief	Advantages of Integrated Current Sensing (Rev. B)	PDF \| HTML	20 Jun 2022
	Application note	Using DRV to Drive Solenoids (Rev. A)	PDF \| HTML	24 Apr 2022
	Application note	How to Drive Unipolar Stepper Motor with the DRV8xxx	PDF \| HTML	03 Dez 2021
	Certificate	DRV8935PEVM EU Declaration of Conformity (DoC)		26 Jan 2021
	Application note	Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B)	PDF \| HTML	19 Jan 2021

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DRV8935PEVM — DRV8935 Evaluierungsmodul für H-Brücken-Treiber

Das Evaluierungsmodul DRV8935 (EVM) ermöglicht die einfache Evaluierung des Bausteins DRV8935.

Der DRV8935nbsp;enthält zwei N-Kanal-Leistungs-MOSFET-H-Brücken und eine integrierte Schaltung zur Strommessung und -regelung. Der DRV8935nbsp;wird mit einem einzigen Netzteil betrieben und unterstützt (...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP)	28	Ultra Librarian
VQFN (RGE)	24	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

DRV8935

33 V, 2,5 A unabhängige Vierfach-Halbbrückentreiber mit Stromregelung

DRV8935

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung

Technische Dokumentation

Design und Entwicklung

DRV8935PEVM — DRV8935 Evaluierungsmodul für H-Brücken-Treiber

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos