Startseite Sensoren Spezialsensoren Signalumformer
Startseite
Sensoren
Spezialsensoren
Signalumformer

PGA305

AKTIV

Signalumformer zur Widerstandsmessung mit digitalen und analogen Ausgängen

Jetzt bestellen
Datenblatt

PGA305

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of input channels 2 Operating temperature range (°C) -40 to 150 Vs (min) (V) 3.3 Vs (max) (V) 30 Interface type 4-20mA, I2C, OWI, Ratiometric analog voltage Resolution (Bits) 24 Rating Military
Number of input channels 2 Operating temperature range (°C) -40 to 150 Vs (min) (V) 3.3 Vs (max) (V) 30 Interface type 4-20mA, I2C, OWI, Ratiometric analog voltage Resolution (Bits) 24 Rating Military
VQFN (RHH) 36 36 mm² 6 x 6
  • Analog features:
    • Analog front-end for resistive bridge sensors
    • Accommodates sensor sensitivities from 1mV/V to 135mV/V
    • On-chip temperature sensor
    • Programmable gain
    • 24-bit sigma-delta analog-to-digital converter for signal channel
    • 24-bit sigma-delta analog-to-digital converter for temperature channel
    • 14-bit output DAC
  • Digital features:
    • FSO accuracy across temperature: < 0.1%
    • System response time: < 220µs
    • Third-order offset, gain, and nonlinearity temperature compensation
    • Diagnostic functions
    • Integrated EEPROM for device operation, calibration data and user data
  • Peripheral features:
    • I2C interface for data reading and device configuration
    • One-wire interface enables communication through the power supply pin without using additional lines
    • Current loop interface: 4mA to 20mA
    • Ratiometric and absolute voltage output
    • Power management control
    • Analog low-voltage detect
  • General features:
    • Industrial temperature range: –40°C to 150°C
    • Power supply:
      • On-chip power management accepts wide power-supply voltage from 3.3V to 30V
      • Integrated reverse-protection circuit
  • Analog features:
    • Analog front-end for resistive bridge sensors
    • Accommodates sensor sensitivities from 1mV/V to 135mV/V
    • On-chip temperature sensor
    • Programmable gain
    • 24-bit sigma-delta analog-to-digital converter for signal channel
    • 24-bit sigma-delta analog-to-digital converter for temperature channel
    • 14-bit output DAC
  • Digital features:
    • FSO accuracy across temperature: < 0.1%
    • System response time: < 220µs
    • Third-order offset, gain, and nonlinearity temperature compensation
    • Diagnostic functions
    • Integrated EEPROM for device operation, calibration data and user data
  • Peripheral features:
    • I2C interface for data reading and device configuration
    • One-wire interface enables communication through the power supply pin without using additional lines
    • Current loop interface: 4mA to 20mA
    • Ratiometric and absolute voltage output
    • Power management control
    • Analog low-voltage detect
  • General features:
    • Industrial temperature range: –40°C to 150°C
    • Power supply:
      • On-chip power management accepts wide power-supply voltage from 3.3V to 30V
      • Integrated reverse-protection circuit

The PGA305 device supplies an interface for piezoresistive and strain-gauge pressure-sense elements. The device is a full system-on-chip (SoC) solution that includes programmable analog front end (AFE), ADC, and digital signal processing that enable direct connection to the sense element. The PGA305 device also includes integrated voltage regulators and an oscillator to minimize the number of external components. The PGA305 device can employ third-order temperature and nonlinearity compensation to achieve high accuracy. The device can also use the integrated I2C interface or the one-wire serial interface (OWI) to achieve external communication and simplify the system calibration process. An Integrated DAC supports absolute-voltage, ratiometric-voltage, and 4mA to 20mA current-loop outputs.

The PGA305 device supplies an interface for piezoresistive and strain-gauge pressure-sense elements. The device is a full system-on-chip (SoC) solution that includes programmable analog front end (AFE), ADC, and digital signal processing that enable direct connection to the sense element. The PGA305 device also includes integrated voltage regulators and an oscillator to minimize the number of external components. The PGA305 device can employ third-order temperature and nonlinearity compensation to achieve high accuracy. The device can also use the integrated I2C interface or the one-wire serial interface (OWI) to achieve external communication and simplify the system calibration process. An Integrated DAC supports absolute-voltage, ratiometric-voltage, and 4mA to 20mA current-loop outputs.
filter Andere Signalumformer suchen
Herunterladen
Weitere Informationen anfordern

Das vollständige Datenblatt ist verfügbar. Jetzt anfordern

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet PGA305 Signal Conditioner and Transmitter for Pressure Sensors datasheet PDF | HTML 14 Aug 2024

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​