The ´BCT623 bus transceiver is designed for asynchronous communication between data buses. The control function implementation allows for maximum flexibility in timing. The ´BCT623 provides true data at its outputs.
This device allows data transmission from the A bus to the B bus
or from the B bus to the A bus depending upon the logic levels at the
output-enable (OEAB and 
)
inputs.
The output-enable inputs can be used to disable the device so that
the buses are effectively isolated. The dual-enable configuration
gives the transceivers the capability of storing data by
simultaneously enabling OEAB and . Each output reinforces its input in this
configuration. When both OEAB and are enabled and all other data sources to the two sets
of bus lines are at high impedance, both sets of bus lines (16 in
all) will remain at their last states.
The SN54BCT623 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74BCT623 is characterized for operation from 0°C to 70°C.
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | Octal Bus Transceivers With 3-State Outputs datasheet (Rev. A) | 01 Nov 1993 | |
| * | SMD | SN54BCT623 SMD 5962-90940 | 21 Jun 2016 | |
| Application note | Implications of Slow or Floating CMOS Inputs (Rev. E) | 26 Jul 2021 | ||
| Selection guide | Logic Guide (Rev. AB) | 12 Jun 2017 | ||
| Application note | Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) | 02 Dez 2015 | ||
| User guide | LOGIC Pocket Data Book (Rev. B) | 16 Jan 2007 | ||
| Application note | Semiconductor Packing Material Electrostatic Discharge (ESD) Protection | 08 Jul 2004 | ||
| Application note | TI IBIS File Creation, Validation, and Distribution Processes | 29 Aug 2002 | ||
| Application note | Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A) | 01 Aug 1997 | ||
| Application note | Designing With Logic (Rev. C) | 01 Jun 1997 | ||
| Application note | Input and Output Characteristics of Digital Integrated Circuits | 01 Okt 1996 | ||
| Application note | Live Insertion | 01 Okt 1996 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| CDIP (J) | 20 | Ultra Librarian |
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.