SN74AUCH16244

Name: SN74AUCH16244
Brand: TI
SKU: SN74AUCH16244
Price: 0.792 USD

AKTIV

16-Kanal-, 0,8-V- bis 2,7-V-Hochgeschwindigkeitspuffer mit Bus-Hold und Tri-State-Ausgängen

Jetzt bestellen

Datenblatt

document-pdfAcrobat SN74AUCH16244 datasheet (Rev. E) (Englisch)

SN74AUCH16244

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Technology family

AUC

Supply voltage (min) (V)

0.8

Supply voltage (max) (V)

2.7

Number of channels

16

IOL (max) (mA)

9

Supply current (max) (µA)

20

IOH (max) (mA)

-9

Input type

Standard CMOS

Output type

3-State

Features

Balanced outputs, Bus-hold, Over-voltage tolerant inputs, Partial power down (Ioff), Ultra high speed (tpd <5ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Technology family

AUC

Supply voltage (min) (V)

0.8

Supply voltage (max) (V)

2.7

Number of channels

16

IOL (max) (mA)

9

Supply current (max) (µA)

20

IOH (max) (mA)

-9

Input type

Standard CMOS

Output type

3-State

Features

Balanced outputs, Bus-hold, Over-voltage tolerant inputs, Partial power down (Ioff), Ultra high speed (tpd <5ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

TSSOP (DGG)

48

101.25 mm² 12.5 x 8.1

TVSOP (DGV)

48

62.08 mm² 9.7 x 6.4

Member of the Texas Instruments Widebus™ Family
Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
I_off Supports Partial-Power-Down Mode Operation
Sub 1-V Operable
Max t_pd of 1.8 ns at 1.8 V
Low Power Consumption, 20-uA Max I_CC
±8-mA Output Drive at 1.8 V
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments.

Member of the Texas Instruments Widebus™ Family
Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
I_off Supports Partial-Power-Down Mode Operation
Sub 1-V Operable
Max t_pd of 1.8 ns at 1.8 V
Low Power Consumption, 20-uA Max I_CC
±8-mA Output Drive at 1.8 V
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments.

This 16-bit buffer/driver is operational at 0.8-V to 2.7-V V_CC, but is designed specifically for 1.65-V to 1.95-V V_CC operation.

The SN74AUCH16244 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable (OE)\ inputs.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

This 16-bit buffer/driver is operational at 0.8-V to 2.7-V V_CC, but is designed specifically for 1.65-V to 1.95-V V_CC operation.

The SN74AUCH16244 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable (OE)\ inputs.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

filter

Andere Nicht invertierende Puffer & Treiber suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 17

	Typ	Titel	Datum
*	Data sheet	SN74AUCH16244 datasheet (Rev. E)	01 Nov 2002
	Selection guide	Little Logic Guide 2018 (Rev. G)	06 Jul 2018
	Selection guide	Logic Guide (Rev. AB)	12 Jun 2017
	Application note	How to Select Little Logic (Rev. A)	26 Jul 2016
	Application note	Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)	02 Dez 2015
	User guide	LOGIC Pocket Data Book (Rev. B)	16 Jan 2007
	Product overview	Design Summary for WCSP Little Logic (Rev. B)	04 Nov 2004
	Application note	Semiconductor Packing Material Electrostatic Discharge (ESD) Protection	08 Jul 2004
	Application note	Selecting the Right Level Translation Solution (Rev. A)	22 Jun 2004
	User guide	Signal Switch Data Book (Rev. A)	14 Nov 2003
	Application note	Designing With TI Ultra-Low-Voltage CMOS (AUC) Octals and Widebus Devices	21 Mär 2003
	User guide	AUC Data Book, January 2003 (Rev. A)	01 Jan 2003
	Application note	Texas Instruments Little Logic Application Report	01 Nov 2002
	Application note	TI IBIS File Creation, Validation, and Distribution Processes	29 Aug 2002
	More literature	Standard Linear & Logic for PCs, Servers & Motherboards	13 Jun 2002
	More literature	STANDARD LINEAR AND LOGIC FOR DVD/VCD PLAYERS	27 Mär 2002
	More literature	AUC Product Brochure (Rev. A)	18 Mär 2002

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.