BQ25570

ACTIVO

CI de gestión de potencia de cosechadora de potencia ultrabaja con cargador de turbocompresión y con

alarmNotificaciones Haga su pedido ahora

Detalles del producto

Vin (min) (V) 0.6 Vin (max) (V) 5.1 Absolute max Vin (max) (V) 5.5 Charge current (max) (A) 0.1 Control topology Switch-Mode Boost Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, SuperCap Rating Catalog Features Input OVP, Solar input/MPPT Battery charge voltage (min) (V) 2.2 Battery charge voltage (max) (V) 5.5 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 125
Vin (min) (V) 0.6 Vin (max) (V) 5.1 Absolute max Vin (max) (V) 5.5 Charge current (max) (A) 0.1 Control topology Switch-Mode Boost Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, SuperCap Rating Catalog Features Input OVP, Solar input/MPPT Battery charge voltage (min) (V) 2.2 Battery charge voltage (max) (V) 5.5 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 125
VQFN (RGR) 20 12.25 mm² 3.5 x 3.5
  • Ultra Low Power DC-DC Boost Charger
    • Cold-Start Voltage: VIN ≥ 600 mV
    • Continuous Energy Harvesting From VIN as low as 100 mV
    • Input Voltage Regulation Prevents Collapsing High Impedance Input Sources
    • Full Operating Quiescent Current of 488 nA (typical)
    • Ship Mode with < 5 nA From Battery
  • Energy Storage
    • Energy can be Stored to Re-chargeable Li-ion Batteries, Thin-film Batteries, Super-capacitors, or Conventional Capacitors
  • Battery Charging and Protection
    • Internally Set Undervoltage Level
    • User Programmable Overvoltage Levels
  • Battery Good Output Flag
    • Programmable Threshold and Hysteresis
    • Warn Attached Microcontrollers of Pending Loss of Power
    • Can be Used to Enable or Disable System Loads
  • Programmable Step Down Regulated Output (Buck)
    • High Efficiency up to 93%
    • Supports Peak Output Current up to 110 mA (typical)
  • Programmable Maximum Power Point Tracking (MPPT)
    • Provides Optimal Energy Extraction From a Variety of Energy Harvesters including Solar Panels, Thermal and Piezo Electric Generators
  • Ultra Low Power DC-DC Boost Charger
    • Cold-Start Voltage: VIN ≥ 600 mV
    • Continuous Energy Harvesting From VIN as low as 100 mV
    • Input Voltage Regulation Prevents Collapsing High Impedance Input Sources
    • Full Operating Quiescent Current of 488 nA (typical)
    • Ship Mode with < 5 nA From Battery
  • Energy Storage
    • Energy can be Stored to Re-chargeable Li-ion Batteries, Thin-film Batteries, Super-capacitors, or Conventional Capacitors
  • Battery Charging and Protection
    • Internally Set Undervoltage Level
    • User Programmable Overvoltage Levels
  • Battery Good Output Flag
    • Programmable Threshold and Hysteresis
    • Warn Attached Microcontrollers of Pending Loss of Power
    • Can be Used to Enable or Disable System Loads
  • Programmable Step Down Regulated Output (Buck)
    • High Efficiency up to 93%
    • Supports Peak Output Current up to 110 mA (typical)
  • Programmable Maximum Power Point Tracking (MPPT)
    • Provides Optimal Energy Extraction From a Variety of Energy Harvesters including Solar Panels, Thermal and Piezo Electric Generators

The bq25570 device is specifically designed to efficiently extract microwatts (µW) to milliwatts (mW) of power generated from a variety of high output impedance DC sources like photovoltaic (solar) or thermal electric generators (TEG) without collapsing those sources. The battery management features ensure that a rechargeable battery is not overcharged by this extracted power, with voltage boosted, or depleted beyond safe limits by a system load. In addition to the highly efficient boosting charger, the bq25570 integrates a highly efficient, nano- power buck converter for providing a second power rail to systems such as wireless sensor networks (WSN) which have stringent power and operational demands. All the capabilities of bq25570 are packed into a small foot-print 20-lead 3.5-mm x 3.5-mm QFN package (RGR).

The bq25570 device is specifically designed to efficiently extract microwatts (µW) to milliwatts (mW) of power generated from a variety of high output impedance DC sources like photovoltaic (solar) or thermal electric generators (TEG) without collapsing those sources. The battery management features ensure that a rechargeable battery is not overcharged by this extracted power, with voltage boosted, or depleted beyond safe limits by a system load. In addition to the highly efficient boosting charger, the bq25570 integrates a highly efficient, nano- power buck converter for providing a second power rail to systems such as wireless sensor networks (WSN) which have stringent power and operational demands. All the capabilities of bq25570 are packed into a small foot-print 20-lead 3.5-mm x 3.5-mm QFN package (RGR).

Descargar Ver vídeo con transcripción Video

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BQ25570EVM-206 — CI de gestión de potencia ultrabaja, módulo de evaluación de convertidor reductor nanopotenciado de

The bq25570 evaluation module (EVM) is a complete module for evaluating the bq25570 energy harvesting charger for storage elements like single-cell Li-Ion/Polymer batteries or super-capacitors. Intended to be powered by high impedance supplies, such as solar panels, thermo-electric generators (...)

Guía del usuario: PDF
Ejemplo de código o demostración

SLUC461 Solar App Design Example V1.3, bq25570

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados para cargadores de baterías
BQ25570 CI de gestión de potencia de cosechadora de potencia ultrabaja con cargador de turbocompresión y con
Herramienta de cálculo

SLUC484 bq25505/70 Design Help V1.3

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados para cargadores de baterías
BQ25505 CI de gestión de potencia de cosechadora de potencia ultrabaja con cargador de impulso y multiplexor BQ25570 CI de gestión de potencia de cosechadora de potencia ultrabaja con cargador de turbocompresión y con
Diseños de referencia

TIDM-WLMOTORMONITOR — Diseño de referencia de monitor de motor inalámbrico

This reference design is inspired by the need to monitor the health of motors and machines to accurately predict and schedule maintenance (or replacement) while minimizing cost and downtime during industrial production. Millions of industrial motors are monitored today with handheld or wired piezo (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00649 — Diseño de referencia de captación de energía en circuito de 4 mA a 20 mA

The TIDA-00649 reference design demonstrates energy harvesting from 4-mA to 20-mA loop-powered systems. The design is simple to insert into existing installations where it scavenges energy from the loop and generates a regulated output voltage. Furthermore, the circuit provides an analog output (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-01528 — Diseño de referencia de potencia ultrabaja para protección secundaria en condiciones de temperatura

Este diseño de referencia implementa una solución de supervisión térmica secundaria para paquetes de baterías a gran escala. Muchas pautas de la industria exigen que el sistema de temperatura secundaria siga alimentado y operativo en caso de que se pierda la fuente de alimentación primaria. Este (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00246 — Diseño de referencia del módulo del adaptador de captación de energía genérico para generadores term

This reference design aims at providing a generic solution for energy harvesting while giving a practical application application for thermoelectric generators (TEG). It is a fully programmable state-machine which runs at 60nA and can enable and disable key functions as they are needed by the (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00616 — Diseño de referencia de LaunchPad BoosterPack para captación de energía para el control del motor de

El LaunchPad para la captación de energía para el control de motor de CC con escobillas está diseñado para cargar una batería de iones de litio o polímero de litio con energía solar y, posteriormente, usar un regulador de tensión para proporcionar alimentación del sistema secundaria a un LaunchPad (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00588 — Diseño de referencia del paquete de refuerzo de la captación de energía

The TIDA-00588 reference design is a BoosterPack that harvests energy from a wide variety of current sources or from the onboard solar cells to power any low-power TI LaunchPad. This design is a highly integrated power management solution that is well-suited for ultra-low power applications.

There (...)

Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00242 — Diseño de referencia de captación de energía solar usando Super Cap

This reference design is a solar charger and energy harvester using a highly integrated power management solution that is well-suited for ultra-low power applications. The product is specifically designed to efficiently acquire and manage the microwatts (μW) to milliwatts (mW) needed to (...)
Test report: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGR) 20 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos