DRV8714-Q1

ACTIVO

Controlador de puerta inteligente y medio puente, 4 canales, 40 V, para automoción con amplificador

Detalles del producto

Number of full bridges 2 Vs (min) (V) 4.9 Vs ABS (max) (V) 40 Sleep current (µA) 5 Control mode Independent 1/2-Bridge, PH/EN, PWM Control interface Hardware (GPIO), SPI Features Inline Current sense Amplifier, Open-Load Detection, Smart Gate Drive Rating Automotive Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 4.9 Vs ABS (max) (V) 40 Sleep current (µA) 5 Control mode Independent 1/2-Bridge, PH/EN, PWM Control interface Hardware (GPIO), SPI Features Inline Current sense Amplifier, Open-Load Detection, Smart Gate Drive Rating Automotive Operating temperature range (°C) -40 to 125
HTQFP (PHP) 48 81 mm² 9 x 9 VQFN (RHA) 40 36 mm² 6 x 6 VQFN (RVJ) 56 64 mm² 8 x 8
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Multi-channel half-bridge gate drivers
    • Pin to pin 4 and 8 half-bridge driver variants
    • 4.9V to 37V (40V abs. max) operating range
    • 4 PWM inputs with output mapping
    • Tripler charge pump for 100% PWM
    • Half-bridge, H-bridge, and SPI control modes
  • Smart multi-stage gate drive architecture
    • Adjustable slew rate control
    • Adaptive propagation delay control
    • 50µA to 62mA peak source current output
    • 50µA to 62mA peak sink current output
    • Integrated dead-time handshaking
  • 2x wide common mode current shunt amplifiers
    • Supports inline, high-side, or low-side
    • Adjustable gain settings (10, 20, 40, 80V/V)
  • Multiple interface options available
    • SPI: Detailed configuration and diagnostics
    • H/W: Simplified control and less MCU pins
  • Compact VQFN packages with wettable flanks
  • Integrated protection features
    • Dedicated driver disable pin (DRVOFF)
    • Low IQ, sleep mode motor braking (BRAKE)
    • Supply and regulator voltage monitors
    • MOSFET VDS overcurrent monitors
    • MOSFET VGS gate fault monitors
    • Charge pump for reverse polarity MOSFET
    • Offline open load and short circuit diagnostics
    • Device thermal warning and shutdown
    • Window watchdog timer
    • Fault condition interrupt pin (nFAULT)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Multi-channel half-bridge gate drivers
    • Pin to pin 4 and 8 half-bridge driver variants
    • 4.9V to 37V (40V abs. max) operating range
    • 4 PWM inputs with output mapping
    • Tripler charge pump for 100% PWM
    • Half-bridge, H-bridge, and SPI control modes
  • Smart multi-stage gate drive architecture
    • Adjustable slew rate control
    • Adaptive propagation delay control
    • 50µA to 62mA peak source current output
    • 50µA to 62mA peak sink current output
    • Integrated dead-time handshaking
  • 2x wide common mode current shunt amplifiers
    • Supports inline, high-side, or low-side
    • Adjustable gain settings (10, 20, 40, 80V/V)
  • Multiple interface options available
    • SPI: Detailed configuration and diagnostics
    • H/W: Simplified control and less MCU pins
  • Compact VQFN packages with wettable flanks
  • Integrated protection features
    • Dedicated driver disable pin (DRVOFF)
    • Low IQ, sleep mode motor braking (BRAKE)
    • Supply and regulator voltage monitors
    • MOSFET VDS overcurrent monitors
    • MOSFET VGS gate fault monitors
    • Charge pump for reverse polarity MOSFET
    • Offline open load and short circuit diagnostics
    • Device thermal warning and shutdown
    • Window watchdog timer
    • Fault condition interrupt pin (nFAULT)

The DRV871x-Q1 family of devices are highly integrated, multi-channel gate drivers intended for driving multiple motors or loads. The devices integrate either 4 (DRV8714-Q1) or 8 (DRV8718-Q1) half-bridge gate drivers, driver power supplies, current shunt amplifiers, and protection monitors reducing total system complexity, size, and cost.

A smart gate drive architecture manages dead time to prevent shoot-through, controls slew rate to decrease electromagnetic interference (EMI), and optimizes propagation delay for enhanced performance.

Input modes are provided for independent half-bridge or H-bridge control. Four PWM inputs can be multiplexed between the different drivers in combination with SPI control.

Wide common mode shunt amplifiers provide inline current sensing to continuously measure motor current even during recirculating windows. The amplifier can be used in low-side or high-side sense configurations if inline sensing is not required.

The devices provide an array of protection features to promote robust system operation. These include under and overvoltage monitors, VDS overcurrent and VGS gate fault monitors for the external MOSFETs, offline open load and short circuit diagnostics, and internal thermal warning and shutdown protection.

The DRV871x-Q1 family of devices are highly integrated, multi-channel gate drivers intended for driving multiple motors or loads. The devices integrate either 4 (DRV8714-Q1) or 8 (DRV8718-Q1) half-bridge gate drivers, driver power supplies, current shunt amplifiers, and protection monitors reducing total system complexity, size, and cost.

A smart gate drive architecture manages dead time to prevent shoot-through, controls slew rate to decrease electromagnetic interference (EMI), and optimizes propagation delay for enhanced performance.

Input modes are provided for independent half-bridge or H-bridge control. Four PWM inputs can be multiplexed between the different drivers in combination with SPI control.

Wide common mode shunt amplifiers provide inline current sensing to continuously measure motor current even during recirculating windows. The amplifier can be used in low-side or high-side sense configurations if inline sensing is not required.

The devices provide an array of protection features to promote robust system operation. These include under and overvoltage monitors, VDS overcurrent and VGS gate fault monitors for the external MOSFETs, offline open load and short circuit diagnostics, and internal thermal warning and shutdown protection.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
DRV8718-Q1 ACTIVO Controlador de puerta inteligente y medio puente, 8 canales, 40 V, para automoción con amplificad 8x half-bridge channel variant that is pin-to-pin and software compatible
Funcionalidad similar a la del dispositivo comparado
DRV8705-Q1 ACTIVO Controlador de puerta inteligente de 40 V, puente H, para automoción con diagnóstico fuera de línea H-bridge gate driver with 1x low-side current sense amplifier
DRV8706-Q1 ACTIVO Controlador de puerta inteligente y puente H de 40 V para automoción con diagnóstico fuera de lín H-bridge gate driver with 1x inline current sense amplifier

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 14
Tipo Título Fecha
* Data sheet DRV871x-Q1 Automotive Multi-Channel Smart Half-Bridge Gate Drivers With Wide Common Mode Inline Current Sense Amplifiers datasheet (Rev. D) PDF | HTML 17 abr 2024
White paper Driving High-Voltage Contactors in EV and HEVs (Rev. A) PDF | HTML 11 jul 2024
Application note Bulk Capacitor Sizing for DC Motor Drive Applications PDF | HTML 02 jul 2024
Technical article Exploring the benefits of multichannel gate drivers in automotive power seats PDF | HTML 29 mar 2022
More literature TI Motor Drives Automotive Body Motors Webinar 02 jul 2021
Application note Daisy Chain Implementation for Serial Peripheral Interface (Rev. A) 07 abr 2021
Application note Understanding Smart Gate Drive (Rev. D) 01 mar 2021
Application brief Integrated Protection Against Back EMF Overvoltage in Motor Drive Systems (Rev. A) PDF | HTML 04 feb 2021
Technical article How analog integration simplifies automotive body motor controller designs PDF | HTML 23 oct 2020
Application brief Benefits of a Wide Common Mode, Differential Current Shunt Amplifier PDF | HTML 08 sep 2020
White paper Smart Gate Drive 02 jul 2019
Application note Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) 19 feb 2019
Application note Cut-Off Switch in High-Current Motor-Drive Applications (Rev. A) 20 ago 2018
Application note Relay Replacement for Brushed DC Motor Drive in Automotive Applications 14 nov 2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV8714H-Q1EVM — Módulo de evaluación DRV8714H-Q1 para controlador de compuerta inteligente de cuatro canales con con

El módulo de evaluación (EVM) DRV8714H-Q1 permite evaluar fácilmente el controlador de compuerta de cuatro canales DRV8714H-Q1 con detección de corriente en línea. El dispositivo incluido en este EVM es la variante de encapsulado RHA de 40 pines y 6 mm x 6 mm con una interfaz de hardware (...)

Guía del usuario: PDF
Placa de evaluación

DRV8714S-Q1EVM — Módulo de evaluación DRV8714S-Q1 para controlador de compuerta inteligente de cuatro canales con con

El módulo de evaluación (EVM) DRV8714S-Q1 permite evaluar fácilmente el controlador de compuerta de cuatro canales DRV8714S-Q1 con detección de corriente en línea y diagnósticos fuera de línea. El dispositivo presentado en este EVM es la variante de paquete RVJ de 56 pines de 8 mm × 8 mm con (...)

Guía del usuario: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTQFP (PHP) 48 Ultra Librarian
VQFN (RHA) 40 Ultra Librarian
VQFN (RVJ) 56 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos